Setting Up The Projector; Setting The User Information; Setting The System - Sony VPL-PX15 Bedienungsanleitung

Setting Up the Projector

Basic setups such as IP address and wireless LAN
settings are necessary for networking operations of the
projector. You can set them up either from the
projector or a computer connected to the same LAN.
Before setting up
• Turn on the projector with the #/ 1 key on the
supplied Remote Commander or control panel of the
projector.
• Confirm that INPUT-B FUNC. (VPL-PX15) or
INPUT-C FUNC. (VPL-FX51) in the INSTALL
SETTING menu is set to ON.
• Press the INPUT key on the supplied Remote
Commander or control panel of the projector to select
INPUT B (VPL-PX15) or INPUT C (VPL-FX51).
The Network Projector window opens.
• Set the PJ/NETWORK select switch on the Remote
Commander to NETWORK.
• When you are setting up the items from the projector,
using the Net Mouse function is convenient.
For details on the Net Mouse function, see page 8 (GB).
• You can also set up from the projector using the
screen keyboard displayed on the projector's screen,
and operate with the supplied remote commander.
For information on the screen keyboard, see page 21 (GB).

Setting the User Information

You have to set the user and projector information.
This information is used for the e-mail Report
function.
1
From the Start menu, click Control Panel in the
Network Projector window.
2
Double-click the User Information icon.
The User Information Properties dialog box
appears.
3
Click the User tab and input Name and
Organization.
4
Click the Projector tab and input Location,
Installation, Lens, and Memo.

Setting the System

You have to set the projector name for identification in
the network configuration.
1
From the Start menu, click Control Panel in the
Network Projector window.
2
Double-click the System icon.
The System Properties dialog box appears.
3
Click the Projector Name tab and input Name and
Description.
9
(GB)