Using The E-Mail Report Function - Sony VPL-PX15 Bedienungsanleitung

x For VPL-FX50
The ASPECT (4:3, 16:9) and LAMP MODE
(STANDARD, LOW) buttons function the
same as the settings in the menus.
3
Click the button to adjust or set.
Checking the Indicators on the
Projector
You can check the present status of the indicators on
the control panel of the projector on a computer
display.
1
Start Internet Explorer 4.0 or later versions, or
Netscape Navigator 4.5x or 4.7x version on the
computer.
2
Type "http://xxx.xxx.xxx.xxx (for the IP address of
the projector)/info" as a URL.
If you do not change the factory-set IP address,
type "http://192.168.0.1/info" (when using a LAN
PC card) or "http://192.168.0.2/info" (when using
the ETHER connector).
If the password is set, the password setting dialog
box appears.
3
Enter the name and password of the Administrator.
The Information window appears.
The illustration below is for the VPL-PX15.
2
3
1
4 5
1 Projector Status
Shows the present status of the projector.
2 Projector
Shows the information on the projector.
3 System
Shows the versions of the OS (Operating System) and
application currently used.
4 UPDATE button
Click to update the latest information.
5 Error Status
Shows the present status of the indicators on the
control panel of the projector.
For information on the indicators, see the Operating
Instructions.

Using the e-Mail Report Function

The projector sends mail to the preset addresses to
inform of the projector's status, the replacement time
of the projector lamp, maintenance time of the
projector and error occurrence.
What you can do with the e-Mail Report
function
• Reports installation status of the projector, user
information, etc. periodically. You can specify the
transmitting date of mails.
• If any error occurs with the projector, reports it
immediately.
• Sends a warning mail when a preset used time of the
projector lamp has been reached.
(continued)
31
(GB)