Sony VPL-PX15 Bedienungsanleitung Seite 72

Operations from a Computer
Controlling the Projector from a
Computer
You can perform various adjustments and settings of
the projector on a computer's display. Three control
windows are available; GENERAL, PICTURE CTRL
and SETTINGS windows, each with different
functions.
The functions of the buttons in the windows are the
same as those on the Remote Commander supplied
with the projector.
For details on the buttons, see the Operating Instructions of
the projector.
The illustrations shown in the steps below are for the
VPL-PX15.
1
Click the MORE... button in the PJ CONTROL
section.
The GENERAL window appears.
2
Click the function tab to select the window you
want.
GENERAL window
x For VPL-FE110U/M
Specify the switcher number with the SWITCHER
button. Use the GROUP button to specify the
group index numbers and the INDEX button to
specify the device index numbers. Click
the drop-down list, then select the number.
30
(GB)
PICTURE CTRL window
x For VPL-PX15
The COLOR TEMP (HIGH, LOW) buttons
function the same as the settings in the menu.
x For VPL-FX50
The DDE (OFF, PROGRESSIVE, FILM) and
RGB ENHANCER +/– buttons function the same
as the settings in the menus.
SETTINGS window
(VPL-PX15)
x For VPL-PX15
The ASPECT (4:3, 16:9) and STATUS (ON, OFF)
buttons function the same as the settings in the
to open
menu.
(VPL-PX15)
(VPL-PX15)