Herunterladen Inhalt Inhalt Diese Seite drucken

Sony VPL-PX15 Bedienungsanleitung

Bedienungsanleitung für das arbeiten im netzwerk
Vorschau ausblenden Andere Handbücher für VPL-PX15:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 171
Data Projector
取扱説明書(ネットワーク編)
Operating Instructions for Networking
Instructions en cas de mise en réseau
Manual de instrucciones de red
Bedienungsanleitung für das Arbeiten im Netzwerk
Manuale di rete
お買い上げいただきありがとうございます。
ソフトウェア製品は、安全のための注意事項を守らな
いと、健康を害することがあります。
この取扱説明書には、健康を守るための重要な注意事項と製品の取り扱
いかたを示してあります。この取扱説明書をよくお読みのうえ、製品を
お使いください。お読みになったあとは、いつでも見られるところに必
ず保管してください。
VPL-PX15
VPL-FX51
© 2002 Sony Corporation
4-091-024-01(1)
JP
GB
FR
ES
DE
IT
CS

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Sony VPL-PX15

  • Seite 1 Data Projector 取扱説明書(ネットワーク編) Operating Instructions for Networking Instructions en cas de mise en réseau Manual de instrucciones de red Bedienungsanleitung für das Arbeiten im Netzwerk Manuale di rete お買い上げいただきありがとうございます。 ソフトウェア製品は、安全のための注意事項を守らな いと、健康を害することがあります。 この取扱説明書には、健康を守るための重要な注意事項と製品の取り扱 いかたを示してあります。この取扱説明書をよくお読みのうえ、製品を お使いください。お読みになったあとは、いつでも見られるところに必 ず保管してください。 VPL-PX15 VPL-FX51 © 2002 Sony Corporation...
  • Seite 2: 安全のために

    安全のために ソフ ト ウェア製品は、 まちがった使いかたをする と、健康を害するおそれがあ り ま 警告表示の意味 す。 マニュアルおよび製品では、次 健康を守るために次のこ とを必ずお守り く ださい。 のような表示をしています。表 示の内容をよく理解してから本 安全のための注意事項を守る 文をお読みください。 下記の注意事項をよ く お読みく ださい。 製品全般の注意事項が記されています。 この表示の注意事項を守らない と、健康を害するおそれがあり ます。 行為を禁止する記号 下記の注意を守らないと、 健康を害する おそれがあります。 ディスプレイ画面を長時間継続して見ない キーボードを使いすぎない ディ スプレイ などの画面を長時間継続して見続 キーボー ドやマウスなどを長時間継続して使用 ける と、目が疲れたり 、視力が低下するおそれ する...
  • Seite 3: Inhaltsverzeichnis

    目次 2 (JP) 安全のために ................ 2 (JP) 警告 .................. お使いになる前に 5 (JP) 本機の特長 ................6 (JP) 使用上のご注意 ..............6 (JP) このマニュアルについて ............準備 7 (JP) ネットワーク機能を使うための準備 ........システム構成 ................7 (JP) PCカードを使う ................8 (JP) ネットワーク機能を使うための設定 ........8 (JP) リモートコマンダーを使う ............8 (JP) ネットマウス機能を使う...
  • Seite 4 目次 操作 20 (JP) プロジェクターで操作する ..........はじめに ..................20 (JP) Slide ViewerでPowerPoinファイルの プレゼンテーションを行う ..........21 (JP) Worksheet ViewerでExcel、 Document ViewerでWordのファイルを投影する ..23 (JP) Image Viewerでスライドショーを行う ......... 25 (JP) インターネットに接続する ............. 27 (JP) リモートデスクトップ機能を使う ......... 27 (JP) コンピューターで操作する ..........28 (JP) はじめに...
  • Seite 5: 本機の特長

    本機の特長 本機は、 ネ ッ ト ワーク対応のプロジェク ターです。 LAN (Local Area オートプロジェクターサーチ機能 Network) に接続する こ とによ り 、同一会議室のコンピューターか Windows Meおよび Windows XPを搭載したコンピューターの、 らはも とよ り、 LAN上の離れた所にあるコンピューターからのフ ァイ [マイ ネ ッ ト ワーク] 上の該当のプロジェク ターアイ コ ンをダブルク リ ッ ルの入手、 フ ァイ ルの投影、プレゼンテ−シ ョ ンの実行が可能で クするだけで、...
  • Seite 6: 使用上のご注意

    使用上のご注意 このマニュアルについて このマニュアルは、データプロジェクターVPL-PX15または VPL- ご注意 FX51をネッ ト ワークを介してご使用になる場合の操作について説 電源を切る、 またはリモー ト コマンダーでリ セッ トする ときは、 必 明しています。 ずすべてのアプリ ケーシ ョ ンを終了させてから行ってく ださい。 操作方法は、 画面上のヘルプでもご覧になれます。 コンピューター アプリ ケーシ ョ ンを立ち上げたま ま行う とシステムが壊れて再起 でプロジェクターのWebサーバーにアクセス したときのヘルプは、 動できなく なる可能性があ り ます。 各操作画面で操作項目にポイ ンタを合わせる と画面の下に表示さ...
  • Seite 7: ネットワーク機能を使うための準備

    ハブ/ ルーターへ コンピューター ワイヤレス LAN PC カー ( IEEE802.11b 準拠) コンピューター ケーブル ハブ/ ルーターへ アクセスポイントを使用せずにワイヤレス に接続する場合 ( Peer to Peer モード) VPL-PX15 左側面 ワイヤレス 本機 VPL-FX51 前面 IEEE802.11b カ( 準拠) ケーブル PC CARD スロット ETHER 端子 コンピューター ワイヤレス LAN PC IEEE802.11b...
  • Seite 8: Pcカードを使う

    ネットワーク機能を使うための準備 カードを使う リモートコマンダーを使う 本機の INPUT B (VPL-PX15) または INPUT C (VPL-FX51) PC プロジェクターのセッ ト アップやスライ ドシ ョ ーを行う ときは、付属の CARDスロ ッ ト は、 PCMCIA Type II に準拠したPCカー ドを1 枚挿 リモー ト コマンダーで操作します。操作するときは、 リモー ト コマン 入できるスロ ッ トです。 LANに接続するためには、 指定/推奨のワ...
  • Seite 9: プロジェクターのセットアップ

    これらの設定は、 本機から、 またはLAN上のコンピューターから も 行なえます。 設定の前に ・付属のリモー ト コマンダーまたはコン ト ロールパネルの?/1キーを 押して本機の電源を入れます。 ・設置設定メニューの 「入力 B機能」 (VPL-PX15) または、 「入力 C機能」 (VPL-FX51) が 「オン」 に設定されている こ とを確認して [プロジェクター] タブをク リ ック して[設置場所] 、 [設置状 く ださい。 態] 、 [レンズ] 、 [メモ] を入力する。...
  • Seite 10: 日付、時刻の設定をする

    プロジェクターのセットアップ [ネームサーバー] タブをク リ ッ ク して、 ネームサーバーのダイ ア 日付、時刻の設定をする ログボッ クスを表示し、必要な項目を設定する。 プロジェクターの 「Network Projector」 画面のタスクバーに表示さ れる時計の設定をします。   「Network Projector」 画面で [ス ター ト] メニューから [コン ト ロールパネル] をク リ ッ クする。   [日付/時刻] アイ コンをダブルク リ ッ クする。  日付と時刻の設定をする。 [OK]...
  • Seite 11: ワイヤレスLanの設定をする -ゼロコンフィグレーション対応カードの場合

    VAIO ワイヤレス の設定をする―ゼロコン ワイヤレス の設定をする― 、 ORiNOCO LAN PC フィグレーション対応カードの場合 ワイヤレス カード の場合 IPア ドレス、 ネームサーバーの設定の他ワイ ヤレスネ ッ ト ワークの 設定が必要です。 以下の設定が必要です。 PCカー ドに付属の取扱説明書もあわせてご覧になり、 設定を行っ 「Network Projector」 画面で、 [ス ター ト] メニューから [コン てく ださい。 ト ロールパネル] をク リ ッ クする。 アクセスポイントを使用する場合...
  • Seite 12 プロジェクターのセットアップ Peer to Peer (アドホック)モードの場合 [Access Point ID] (アクセスポイ ン トID) を入力する。 接続するアクセスポイ ン トIDを入力します。 アクセスポイ ン ト を使用せずに、 本機とコンピューターのみでワイ ヤ レスLANに接続する と きは、本機にのみ下記の設定を行います。 [Encryption Key] (無線暗号キー) を入力する。 アクセスポイ ン トで Encryption Key(無線暗号キー) を設定 「アクセスポイ ン ト を使用する場合」 の手順 ∼ を行い、...
  • Seite 13: パスワードを設定する

    FUNCTION パスワードを設定する リモートコマンダーの キー にアプリケーションを登録する コ ンピューターからのアクセス を制限したい場合、 パス ワー ドの設定 ができます。 付属のリモー ト コマンダーのFUNCTION (フ ァ ンクシ ョ ン) 1、 2キー にあ らかじめお好きなアプリ ケーシ ョ ンを登録しておく と、 これらの 「Network Projector」 画面で、 [ス ター ト] メニューから [コン キーを押すだけで、 アプリ ケーシ ョ ンを起動させる こ とができます。 ト...
  • Seite 14: コンピューターからセットアップする

    プロジェクターのセットアップ Administrator(ア ド ミニス ト レーター)の[Name] (名前) と コンピューターからセットアップする [Password] (パスワー ド) を入力する。 パス ワー ドの設定を工場出荷時のま ま変更していない場合は、 キーボー ドを使って入力したい場合はコンピューターからセッ ト アッ [Name] に [root] と入力してく ださい。 プしてく ださい。 「Setup」 (セッ ト アップ)画面が表示されます。 ご注意 ・IPア ドレスが工場出荷時のままの場合、 コ ンピューターでプロジェ クターのセッ ト アップを行う と きは、 設定を行う コンピューターだけ が本機と接続されている環境で行ってく...
  • Seite 15: 基本操作の流れ

    [Presentation Viewer]のアイ コンをダブルク リ ック します。 • 設置設定メニューの 「入力B機能」 (VPL-PX15) または 「入力C 機能」 (VPL-FX51) が「オン」 に設定されている。 • 本機の入力が 「INPUT B」 ( 入力B) ( VPL-PX15) または 「INPUT プレゼンテーションを行うファイルを選ぶ ( ページ) C」 (入力 C) (VPL-FX51) になっている。 「フ ァイ ルを開く 」 ダイ アログボッ クスから目的のPowerPointの...
  • Seite 16 プロジェクターのセットアップ 基本操作の流れ Excel コンピュータ−に保存されている または プロジェクターまたはメモリーカードに保存され Word のファイルを投影する ている画像ファイルでスライドショーを実行する LAN 上のコンピューターに保存されているExcelまたは Word の プロジェ ク ターのス ト レージまたはメモ リ ーカー ドに保存されている画 フ ァイ ルを、 プロジェクターを操作して呼び出し、 プロジェク ターに 像フ ァイ ルを、 プロジェク ターの操作で呼び出し、 ス ライ ドシ ョ ーを実 投影できます。 行します。 Image Viewer を起動する...
  • Seite 17 インターネットに接続する コンピューターで操作する Internet Browser を起動する ( ページ) PowerPoint のファイルでプレゼンテーションを 実行する [Internet Browser] のアイ コンをダブルク リ ッ ク します。 PowerPoint のフ ァイ ルを使ったプレゼンテーシ ョ ンをコ ンピューター の操作で行います。 リモートデスクトップ機能を使ってプレゼンテー [オートプロジェクターサー コンピューターのブラウ ションを実行する チ機能をご使用の場合] ザを起動し、プロジェク プロジェクターにアクセス ターにアクセスする Windows XP Professional搭載のコンピューターをご使用の場合、 する ( ページ) (...
  • Seite 18 基本操作の流れ プロジェクターのセットアップ Excel Word や のファイルをプロジェクターに投 コンピューターに保存されている画像ファイルを 影する プロジェクターに投影する コンピューターを操作してExcelまたはWordのフ ァイ ルをプロジェ コ ンピューターを操作して画像フ ァイ ルをプロジェク ターに投影でき クターに投影できます。 ます。 [オートプロジェクターサー コンピューターのブラウ コンピューターのブラウ [オートプロジェクターサー チ機能をご使用の場合] ザを起動し、プロジェク ザを起動し、プロジェク チ機能をご使用の場合] プロジェクターにアクセス ターにアクセスする ターにアクセスする プロジェクターにアクセス する ( ページ) ( ページ) ( ページ) する ( ページ)...
  • Seite 19 File Manager (ファイルマネージャー)でファ プロジェクターに保存されている画像ファイルで イルを管理する スライドショーを実行する プロジェクターのス ト レージへのファイルの追加または削除を行います。 コ ンピューターの操作で、 プロジェ ク ターに保存されている画像フ ァ イ ルの投影や、 本機であ らかじめ設定してあるフ ァイ ル (.SHOフ ァ コンピューターのブラウ [オートプロジェクターサー イ ル) のスライ ドシ ョ ーを実行します。 ザを起動し、プロジェク チ機能をご使用の場合] ターにアクセスする プロジェクターにアクセス コンピューターのブラウ [オートプロジェクターサー ( ページ) する (...
  • Seite 20: プロジェクターで操作する

    Network Projector 「 」 画面の各部の名前と機能 はじめに 操作の前に • 設置設定メニューの 「入力B機能」 (VPL-PX15) または 「入力C 機能」 (VPL-FX51) が 「オン」 に設定されている こ とを確認して く ださい。 • 本機のネ ッ トマウス機能を使う と、 コンピューターのマウス とキー ボー ドでプロジェク ターを操作できます。 詳しく は、 「 ネ ッ ト マウス機 能を使う」 (8 (JP) ページ) をご覧く ださい。...
  • Seite 21 Slide Viewer PowerPoin アドレス で ファイル のプレゼンテーションを行う 設定したプロジェク ターのIPア ド レスを表示します。 コンピューター からIPア ドレスを入力する と き、 こ こで確認できます。 同一会議室または離れた場所にあるLAN上のコンピューターにあ 8 スクリーンキーボードアイコン るPowerPointフ ァイ ルを本機を操作してプレゼンテーシ ョ ンを行う ク リ ッ クする と画面にスク リ ーンキーボー ドが表示されます。 付属の こ とができます。 リモー ト コマンダ−を使ってセッ ト アップやURLの入力ができます。 また、...
  • Seite 22: プロジェクターで操作する

    プロジェクターで操作する / (スライド上下移動) ボタン 替え方法などを設定する場合は、 [スライ ドシ ョ ー] メニューの [ス ラ スライ ド表示の順番を変更します。 イ ドシ ョ ーの設定] をク リ ックする。 「スライ ドシ ョ ーの設定」 ダイ アログボックスが表示されます。 (ノート表示) ボタン ス ライ ドシ ョ ーの設定について詳しく は、 Slide Viewerのヘルプ スライ ドと発表者用のノ ー ト を表示します。 をご覧く...
  • Seite 23: Worksheet ViewerでExcel

    2 メニューバー Worksheet Viewer Excel で 、 Document Viewer Word で のファイ メニュー コマンド 機能 ルを投影する フ ァイ ル 開く 本機内にあるフ ァイ ルを開きます。 最近使ったフ ァ サブメニューにある、最近使ったフ ァ イ ル イ ルを開きます。 LAN上のコンピューターにあるExcelまたはWordのフ ァイ ルをプロ バージ ョ ン情報 このプログラムのバージ ョ ン情報を表 ジェク...
  • Seite 24 プロジェクターで操作する Document Viewer (ドキュメントビューワー) Excel Word または のファイルを投影する の画面について 上のコンピューターからファイルを選ぶ場合 「プレゼンテーシ ョ ンを実行する−LAN上のコンピューターから フ ァイ ルを選ぶ場合」 (22 (JP) ページ) の手順 、 を行う 。 表示したい Excelまたは Word のフ ァイルのあるフォルダーを 選び、 フ ァイ ルをダブルク リ ックする。 コ ンピューターにパスワー ドが設定されている場合は、 パスワー ドを入力します。 Excelのフ ァイ ルを選んだ場合は、 Worksheet Viewer ( ワーク シー...
  • Seite 25: Image Viewerでスライドショーを行う

    7 メニューバー Image Viewer でスライドショーを行う メニュー コマンド 機能 プロジェク ターのス ト レージや本機に装着したメモリ ーカー ドに保存 フ ァイ ル バージ ョ ン情報 このプログラムのバージ ョ ン情報を表 した画像フ ァイ ルを一覧表示させ、 必要なフ ァイ ルを使ってス ライ ド 示します。 閉じる 現在開いているフ ァイ ルを閉じます。 シ ョ ーを行なう こ とができます。 表示...
  • Seite 26 プロジェクターで操作する 「スライ ドシ ョ ーの設定」 ダイ アログボックスが表示されます。 スライドを1枚表示する メイ ン画面に一覧表示されたス ライ ドから好きなス ライ ドを 1枚選ん で、プロジェク ターのスク リ ーンに全面表示する こ とができます。 「Network Projector」 画面の [Image Viwer] アイ コンをダブ ルク リ ッ クする。 Image Viewerが起動します。 設定を行ったら、 [OK] または [保存] ボタ ンをク リ ックする。 画面左のフォルダー一覧から表示したい画像フ...
  • Seite 27: インターネットに接続する

    設定を変えて保存するときは インターネットに接続する [スライ ドシ ョ ー] メニューの [ス ライ ドシ ョ ーの設定] をク リ ッ ク し、 「 ス ライ ドシ ョ ーの設定」 ダイ アログボッ クスを表示させ、 各種設定をし 「Network Projector」画面で[Internet Browser] (イ ンター ます。 ネ ッ ト ブラウザ) のアイ コンをダブルク リ ックする。 「スライ...
  • Seite 28: コンピューターで操作する

    の場合は、 ブラウザを起動せずにプロジェク ターのWebブラウザに する」 をご覧く ださい。 アクセスできます。 本機の電源を入れる。 ご注意 オー ト プロジェクターサーチ機能をご使用になるには、 コンピュー 入力を 「INPUT B」 (VPL-PX15) または「INPUT C」 (VPL- ター側で、 「コン ト ロールパネル] から 「プログラムの追加と削除」 を FX51) にする。 選び、 ユニバーサル プラグ アン ド プレイ (UPnP) のコンポーネン ト を追加する必要があ り ます。 コンピューターの電源を入れる。...
  • Seite 29 このあとの画面でも、 この場所に表示されるヘルプをご覧になる と このあとの操作は、 29 (JP) ∼ 38 (JP) ページをご覧く ださい。 簡単に操作できます。 7 入力選択ボタン 画面各部の名前と機能 プロジェクターの入力を切り換えます。 プロジェクターにアクセスする と 「アプリ ケーシ ョ ン選択」 画面が開 INPUT Cボタ ンは VPL-PX15にはあ り ません。 きます。画面の各部の名前と機能は以下のとおりです。 MORE... (詳細)ボタン プロジェクターの各種設定ができます。 ご注意 • ネ ッ ト ワークの環境によってフ ァイ ルの転送などに時間がかかる こ...
  • Seite 30 コンピューターで操作する ご注意 プレゼンテーションを実行する File Manager でファイルを削除するときは、ファイルにパス 「 ア プリケ ー ション 選 択 」画 面 で[ PRESENTATION ワー ドを設定していても、パスワー ドの入力なしで削除できま VIEWER] のアイ コンをク リ ッ クする。 す。 「フ ァイ ルの場所」 画面が表示されます。 手順 で[ PROJECTOR ] を選んだと き プレゼンテーシ ョ ンを行いたいフ ァイ ルのある場所をク リ ッ ク し プロジェク...
  • Seite 31 ご注意 プレゼンテーション実行中の画面について コンピューター上のフ ァイ ルでプレゼンテーシ ョ ンを行う場合、 プレゼンテーシ ョ ン実行中は次の画面がコンピューター上に表示さ [設定] をク リ ッ クする とフ ァイ ルがプロジェク ターに転送されま れます。 す。 「 スライ ドシ ョ ーの設定」 画面が出るまでに多少時間がかか り ます。 転送にかかる時間はフ ァイ ルの容量によ り異なり ます。 転送中はプロジェク ターの画面にメ ッセージが表示されます。 「フ ァイ ル選択」 画面の [実行] ボタ ン、 または 「ス ライ ドシ ョ ー の設定」...
  • Seite 32: Worksheet ViewerでExcel

    コンピューターで操作する 7 [次へ]ボタン Excel Word や のファイルをプロジェクターに投 影する プレゼンテーシ ョ ン実行中に、すぐに次のスライ ドまたはアニメー シ ョ ンを表示したいときク リ ッ ク します。 「Slide Viewer ( スライ ドビューワ−) でプレゼンテーシ ョ ンを行 う −プレゼンテーシ ョ ンを実行する」 ( 30(JP)ページ) の手順 8 [スライドショーの設定] ボタン ∼ を行い、 手順 でExcelのフ...
  • Seite 33 7 [選択されたセル] Worksheet Viewer 実行中の画面 現在選択されているセルの列番号と行番号を表示します。 8 ワークシート 現在プロジェクターに投影中のワークシー ト が表示されます。 9 スクロールバー コンピューターに表示されている画面を左右、 または上下にスク ロールします。 スクロールさせるには、 スクロールバーのボックスを ドラ ッグするか矢印をク リ ック します。 終了 ボタン ワークシー トの表示を終了して 「フ ァイ ルの場所」 画面に戻り ます。 v ホーム ボタン 「アプリ ケーシ ョ ン選択」画面に戻り ます。 qs スクロールボタン...
  • Seite 34: Image Viewerで画像を プロジェクターに投影する

    コンピューターで操作する 終了 ボタン Document Viewer 実行中の画面について Wordフ ァイルの表示を終了して「フ ァイルの場所」画面に戻り ま す。 v ホーム ボタン 「アプリ ケーシ ョ ン選択」画面に戻り ます。 ボタン 次のページを表示します。 Image Viewer で画像をプロジェクター に投影する LAN上のコンピューターにある画像フ ァイ ルや、 プロジェクターのス ト レージや本機に装着したメモリ ーカー ド内の画像ファイルをコン ピューターの操作でプロジェク ターに表示させる こ とができます。 ま た、 すでにプロジェク ターで設定してあるス ライ ドシ ョ ー設定フ ァイ ル 1 スクロールボタン...
  • Seite 35 Image Viewer 実行中の画面について 投影したい画像フ ァイ ルを選ぶ。 [参照...] をク リ ック し、 表示したいフ ァイ ルをダブルク リ ッ ク し て選びます。 選んだフ ァイ ル名がテキス ト ボッ クスに表示されま す。 [実行] ボタ ンをク リ ッ クする。 選んだ画像がプロジェク ターに全画面表示されます。 ご注意 UXGAなどサイ ズの大きい画像の場合、 メモリ ーの制約から開 けないこ とがあ り ます。 その場合は、縮少するなど してサイ ズ を小さ...
  • Seite 36 コンピューターで操作する ご注意 手順 でフォルダーを選んだ場合 選択したフ ォルダー内の画像フ ァイ ル名が画面右に一覧表示 [終了] ボタ ンまたは [ホーム] ボタ ンをク リ ッ ク してこの画面を抜け されます。 る と、 「一時フ ァイ ル」 に表示されているフ ァイ ルは自動的に消去さ れます。 プロジェク ターに保存する場合は、 File Manager ( フ ァイ ル マネージャー) (37 (JP) ページ) でフ ァイ ルの追加を行ってく ださ い。...
  • Seite 37: File Managerを使う

    現在使用しているメモリー容量/使用できるメモリー容量 Image Viewer 実行中の画面について コンピューター上にある画像ファイルを表示するときの「Image Viewer 実行中の画面について」 (35 (JP) ページ ) と同じです。 .SHOフ ァイ ルを選択したときの画面に出る[次へ]ボタ ンは、 ス ライ ドシ ョ ー実行中にク リ ッ クする とすぐに次のス ライ ドを表示します。 [前 へ]ボタ ンはひとつ前のス ライ ドに戻り ます。 File Manager を使う 本機に保存されている不要なフ ァイ ルを削除したり 、 LAN上のコン ピューター内のフ...
  • Seite 38: プロジェクターをコントロールする

    プロジェクターコン ト ロール画面は、 機能別に 「GENERAL」 画面、 「PICTURE CTRL」 画面、 「SETTINGS」 画面の3画面を表示でき ます。 各画面のボタ ンの働きは、 本機に付属のリ モー ト コマンダーの同名 のボタ ンと同じです。 ◆ ボタ ンの働きについて詳しく は、本機の取扱説明書をご覧く ださい。 下記のイ ラス ト はすべてVPL-PX15 の画面です。 PJ CONTROL(プロジェクターコン ト ロール)の [MORE...] VPL-PX15 (詳細) ボタ ンをク リ ッ クする。 ( )...
  • Seite 39: メンテナンス機能

    入力してく ださい。 ア ド ミニス ト レ−タ−の [名前] と [パスワー ド] を入力する。 メール レポート機能を使う 「Information」 (イ ンフォメ−シ ョ ン) 画面が表示されます。 e-Mail Report 機能でできること 下記のイ ラス ト は VPL-PX15 の画面です。 ・プロジェクターの設置状況やユ−ザ−情報を定期的に通知しま す。送信日を指定できます (定期レポー ト) 。 ・プロジェクターにエラーが発生した場合、直ちにメールで通知し ます(エラー通知) 。 ・ ラ ンプの使用時間があ らかじめ指定しておいた時間に到達した場...
  • Seite 40 メンテナンス機能 割り当てられた [電子メールア ドレス] 、 [SMTP] を設定しま メールの設定をする―プロジェクターで操作する 場合 す。 メールの送信先や送信時期、およびメール機能の設定をします。 ◆ 詳しく は、 Eメール レポー トのヘルプをご覧く ださい。 [スター ト] メニューから [コン ト ロールパネル] − [Eメール レ 設定が終了したら、 [OK] ボタ ンをク リ ックする。 ポー ト] を選択する。 Eメール レポー ト機能の設定画面が表示されます。 テストメールを送信するには 指定したア...
  • Seite 41 Every Month on Day [ ] ( 毎月) : このチェ ックボックスをチェ ッ メールの設定をする―コンピューターで操作する 場合 ク し、 ドロ ップダウン リ ス トから日を選ぶと、毎月決まった日にレ ポー ト が発行されます。 メールの送信先や送信時期、およびメール機能の設定をします。 レポー トする内容は、以下のとおりです。 「Setup」 (セッ ト アップ) 画面を表示させる。 製品情報:商品名、 シリ アル番号、バ−ジ ョ ン情報 ◆ 「Setup」 画面の表示のしかたは、 「 セッ ト アップの画面を表示する」 ユーザー情報:ユーザー名、...
  • Seite 42 メンテナンス機能 6 [ APPLY ] (適用)ボタン メールサーバーを設定する―コンピューターで操 作する場合 メールサーバーの設定が終了したら このボタ ンをク リ ッ ク します。 ま た、テス ト メールを送信する とき使います。 メールの設定画面で設定が終了したら、 [NEXT] ボタ ンをク リ ッ ク ご注意 します。 メールサーバーの設定画面が表示されます。 Test Mail ( テス ト メール) は、以下の項目が設定されていない場 合、 または設定が正しく ないと、 エラーメ ッセージが表示され、 送信 できません。...
  • Seite 43: トラブル時の対処

    ご使用のPCカー ドメーカー、アクセスポイ ン ト メーカーにお問い合わせく ださい。 指定のソニーのワイ ヤレスLAN PCカー ドを使用していてプロジェク ターが正しく 動作しない 場合は、テクニカルイ ンフ ォメーシ ョ ンセンターにお問い合わせく ださい。 プロジェクターに接続できない。 ・ 設置設定メニューの 「入力 B 機能」 (VPL-PX15) または 「入力 C 機能」 (VPL-FX51) の設定が 正しく ない。 t「オン」 に設定してく ださい。 ・ ブラウザの設定が「プロキシサーバーを使用する」 になっている。...
  • Seite 44 またはリ モー トデスク ト ップが使えない。 t コンピューター側でそれぞれに必要な設定を行って下さい。 (27(JP) 、 28(JP) ページ) 画面がフ リ ーズして動かない。 プロジェクターがフ リ ーズした。 t 設置設定メニューの 「入力 B 機能」 (VPL-PX15) または 「入力 C 機能」 (VPL-FX51) をいっ たん「オフ」 にしてから 「オン」 に設定し直してく ださい。 「このフ ァイ ルはパスワー ドが設定されています。 プロジェクターまたは選択したフ ァイ ルにパスワー ドが設定されている。...
  • Seite 45: Before Using

    Table of Contents Before Using Features ..............5 (GB) Precautions ............... 6 (GB) About This Manual ............ 6 (GB) Preparation Preparations for Using the Networking Function .. 7 (GB) System Configuration ........... 7 (GB) Using the PC Card............8 (GB) Setting for Networking Function ........
  • Seite 46 Table of Contents Running a Slide Show Using the Image Viewer ..25 (GB) Connecting to the Internet ........... 27 (GB) Using the Remote Desktop Function ......27 (GB) Operations from a Computer ......... 28 (GB) Preparations ..............28 (GB) Starting the browser for accessing the projector ..
  • Seite 47: Features

    Features The projector is compatible with networking. Auto Projector Search function Connecting to a Local Area Network (LAN) allows If Windows Me or Windows XP is installed in your you to run a presentation using a file stored in a computer, you can easily get access to the projector’s computer connected by the same LAN.
  • Seite 48: Precautions

    • To prevent data loss, make backup of data frequently. software and the accompanying documentation, in In no event will Sony be liable for any loss of data. whole or in part, on any product or system other than the projector.
  • Seite 49: Preparations For Using The Networking Function

    Computer LAN cable Wireless LAN PC card (IEEE802.11b compliant) Hub/router Connecting to wireless LAN without using Left side of the VPL-PX15 the wireless LAN access point (Peer to Front of the VPL-FX51 cable Peer mode) ETHER PC CARD slot connector...
  • Seite 50: Using The Pc Card

    Preparations for Using the Networking Function Using the PC Card Using the Remote Commander The PC CARD slot of INPUT B (VPL-PX15) or When you operate the projector for setting up the projector, running a slide show, etc., use the supplied INPUT C (VPL-FX51) on the projector accepts one Remote Commander.
  • Seite 51: Setting Up The Projector

    • Turn on the projector with the #/ 1 key on the supplied Remote Commander or control panel of the projector. • Confirm that INPUT-B FUNC. (VPL-PX15) or INPUT-C FUNC. (VPL-FX51) in the INSTALL SETTING menu is set to ON.
  • Seite 52: Setting The Date And Clock

    Setting Up the Projector Click the Name Servers tab to display the Name Setting the Date and Clock Servers dialog box, then set the necessary items. The clock is displayed on the task bar of the Network Projector window. To set the date and time, follow the steps below.
  • Seite 53: Setting Up A Wireless Lan Environment - When A Zero Configuration Card Is Used

    Setting Up a Wireless LAN Setting Up a Wireless LAN Environment — when a VAIO or Environment — when a zero configuration card is used ORiNOCO wireless LAN PC card is used Set up IP address, Name servers and Wireless Networks.
  • Seite 54 • If Peer to Peer (Ad-hoc) is configured on one of the Notes connected computers, perform step 1, then steps 3 to • Contact qualified Sony personnel if any trouble 6 above to enter the same Access Point ID and occurs when you are using the specified/ Encryption Key as those of the computer and an recommended Sony wireless LAN PC card.
  • Seite 55: Setting The Password

    Setting the Password Assigning an Application Software to the FUNCTION Key You can set a password for protection against access on the Remote Commander from remote network users. If you assigned an application to the FUNCTION 1 or From the Start menu, click Control Panel in the 2 key on the supplied Remote Commander, a touch of Network Projector window.
  • Seite 56: Setting Up From A Computer

    Setting Up the Projector Enter the Name and Password for Administrator. Setting Up from a Computer If the Password setting is not changed from the factory-preset one, enter “root” in the Name text When you want to type letters using a keyboard, set up box.
  • Seite 57: Basic Operation Flowcharts

    LAN. Double-click the Presentation Viewer icon. • The projector and computer are turned on. • The INPUT-B FUNC. (VPL-PX15) or INPUT-C FUNC. (VPL-FX51) is set to ON in the INSTALL Selecting a file you want to use for your presentation SETTING menu.
  • Seite 58: Projecting An Excel Or Word File Stored In A Computer

    Basic Operation Flowcharts Operations from a Computer Running a slide show using an image file Projecting an Excel or Word file stored in a computer stored in the projector or memory card You can project an Excel or Word file stored in a You can run a slide show using an image file stored in the projector or memory card by operating the computer on the same LAN by operating the projector.
  • Seite 59 Connecting to the Internet Operations from a Computer Starting the Internet Browser (page 27) Running a presentation using a file created with PowerPoint Double-click the Internet Browser icon. You can control a presentation using a file created with PowerPoint from a computer. Running a presentation using the Remote Desktop function Starting a Web browser...
  • Seite 60: Projecting An Excel Or Word File Onto The Projector

    Operations from a Computer Basic Operation Flowcharts Projecting an Excel or Word file onto the Projecting an image onto the projector projector using a file stored in a computer You can project an image onto the projector by You can display an Excel or Word file on the projector operating from a computer.
  • Seite 61 Projecting an image or running a slide Managing files with File Manager show onto the projector using a file stored in the projector You can add files stored in a computer to the projector’s storage or delete files stored in the projector.
  • Seite 62: Operations From The Projector

    Names and functions of the Network Preparations Projector window Before starting • Confirm that INPUT-B FUNC. (VPL-PX15) or INPUT-C FUNC. (VPL-FX51) in the INSTALL SETTING menu is set to ON. • Using the Net Mouse function allows you to operate the projector screen with the mouse and keyboard of the computer.
  • Seite 63 8 Screen keyboard icon Running a Presentation of a Clicking the icon displays the screen keyboard on the PowerPoint File Using the Slide projector screen. You can operate the projector for Viewer setups or enter a URL by using the supplied Remote Commander.
  • Seite 64 Operations from the Projector (Move Slide up/down) buttons When you want to set up the slide show, click Set Changes the order of the slide display. Up Show from the View Show menu. The Set Up Show dialog box opens. (Note View) button For details, see Help for Slide Viewer.
  • Seite 65 2 Menu bar Projecting an Excel File Using Menu Command Function the Worksheet Viewer or Word Open Opens files stored in the File File Using the Document Viewer projector. Opens the recently used files Recent Files You can project Excel or Word files stored in a which are shown in the submenu.
  • Seite 66: Projecting An Excel Or Word File

    Operations from the Projector About the Document Viewer window Projecting an Excel or Word file Using a file stored in a computer connected to the LAN Follow steps 1 and 2 in “Running a presentation — Using a file stored in a computer connected to the LAN”...
  • Seite 67 (Full screen) button Running a Slide Show Using the Displays the full-screen window of a slide you choose. Image Viewer 7 Menu bar You can display thumbnail images of the files stored in Menu Command Function the projector or a memory card installed in the File About Indicates version information...
  • Seite 68 Operations from the Projector The Slide Show Setting dialog box appears. Displaying a full-screen image You can display a full-screen image of an thumbnail image selected from the main window. Double-click the Image Viewer icon in the Network Projector window. The Image Viewer starts.
  • Seite 69: Connecting To The Internet

    To change the settings after saving Connecting to the Internet Click Slide Show Setting from the Slide Show menu. Double-click the Internet Browser icon in the The Slide Show Setting dialog box opens. Network Projector window. The Internet Browser window appears. Click Load.
  • Seite 70: Operations From A Computer

    Before starting • If the browser of your computer is set to “Access the x For VPL-PX15 Internet using a proxy server,” enter the IP address of the projector in the box “Access the Internet without Confirm that the INPUT-B FUNC. is set to ON in the using a proxy server”...
  • Seite 71: Running A Presentation Of A Powerpoint File Using The Slide Viewer

    Select the input to the projector. Select window The INPUT C button does not exist in the window for the VPL-PX15. Having access to the projector opens the Application Select window. The following shows the names and 8 MORE... button functions of the icons and buttons in the window.
  • Seite 72 Operations from a Computer To store the selected file into the projector Running a presentation Click to check the “save in projector” checkbox. You can set the password for the file, if necessary. Click the PRESENTATION VIEWER icon in the Specify the password in the “password”...
  • Seite 73 Note If the message “Projector’s memory is full” appears when clicking the View or Set Up button, delete unnecessary files stored in the projector using the File Manager (page 37 (GB)), then try to run the slide show again. If the message “File size is too large.” appears, reduce the file size, then try to run the slide show again.
  • Seite 74: Projecting An Excel File Using The Worksheet Viewer Or Word File Using The Document Viewer

    Operations from a Computer 4 Slide Projecting an Excel File Using Shows the currently displayed slide in the slide show. the Worksheet Viewer or Word The projector’s screen displays only this slide. File Using the Document Viewer 5 b PREVIOUS button Returns to the previous slide or Animation setting You can project an Excel or Word file on the projector during the slide show.
  • Seite 75 Example: Worksheet Viewer window button Selects the bottom rightmost cell of the displayed worksheet. 2 Zoom text box Clicking opens the drop-down list to select the ratio of enlargement or reduction. The worksheet is enlarged or reduced with the currently selected cell centered.
  • Seite 76: Projecting An Image Using The Image Viewer

    Operations from a Computer 8 END button About the window displayed while the Ends or suspends the Word file display to return to the Document Viewer is running File Select window. 9 v HOME button Returns to the Application Select window. button Displays the next page.
  • Seite 77 Select an image file to display. About the window displayed while the Click Browse to open the file select window on a Image Viewer is running computer. Double-click the file you want. The selected file name is displayed in the Browse text box.
  • Seite 78: Running A Presentation Using An Image File Stored In The Projector

    Operations from a Computer Note When you select a folder in step 4 Image files contained in the selected folder are When you exit the Image Viewer window by clicking listed on the right. the END or HOME button, the files listed in the Temporary File will be automatically erased.
  • Seite 79: Using File Manager

    Used memory/memory capacity About the window displayed while the Image Viewer is running The same window as that in “About the window displayed while the Image Viewer is running” on page 35 (GB) appears. The NEXT button on the .SHO file select window is to advance to the next slide immediately during the slide show.
  • Seite 80: Controlling The Projector From A Computer

    The illustrations shown in the steps below are for the (VPL-PX15) VPL-PX15. x For VPL-PX15 The COLOR TEMP (HIGH, LOW) buttons Click the MORE... button in the PJ CONTROL function the same as the settings in the menu.
  • Seite 81: Maintenance Function

    For information on the indicators, see the Operating Enter the name and password of the Administrator. Instructions. The Information window appears. The illustration below is for the VPL-PX15. Using the e-Mail Report Function What you can do with the e-Mail Report function •...
  • Seite 82 Maintenance Function The mail server setting window opens. Setting for e-Mail Report function  when operating from the projector To use the e-Mail Report function, set the mail addresses and date to where and when mail is to be sent, and which mail functions you are using. From the Start menu, select Control Panel, then select e-Mail Report.
  • Seite 83 The Regular Report contains the following items: Setting for e-Mail Report function  when Product Information: Model name, Serial number, operating from a computer Version information To use the e-Mail Report function, set the mail User Information: User name, Organization name, addresses and date to where and when mail is to be Place where the projector is installed sent, and which mail functions you are using.
  • Seite 84 Maintenance Function 6 APPLY button Setting the mail server — when operating Click this button when the mail server setting is from a computer complete or when you send a test mail. After the mail setting is complete, click the NEXT Note button.
  • Seite 85: Troubleshooting

    Consult with the manufacturer of the card or access point you use. When you are using the specified Sony wireless LAN PC card, consult with the qualified Sony personnel. • The setting of INPUT-B FUNC. (VPL-PX15) or INPUT-C FUNC. (VPL-FX51) in The computer cannot access to the the INSTALL SETTING menu is not correct.
  • Seite 86: Internet-Browser

    The SONY VPL-Series projector contains materials owned by Sony and Sony suppliers, including WESTTEK, LLC. Your purchase of the SONY VPL-Series projector gives you a limited right to use these materials, solely as a part of the SONY VPL-Series projector and only as necessary to use the SONY VPL-Series projector in the manner described in the accompanying documentation.
  • Seite 87: Avant L'utilisation

    Table des matière Avant l’utilisation Caractéristiques ............5 (FR) Précautions ..............6 (FR) A propos de ce manuel ..........6 (FR) Préparatifs Préparation à l’utilisation de la fonction de gestion de réseaux ............. 7 (FR) Configuration système ........... 7 (FR) Utilisation de la carte PC ..........
  • Seite 88: Informations Complémentaires

    Table des matière Opérations à partir d’un ordinateur ....... 28 (FR) Préparatifs ..............28 (FR) Démarrage du navigateur pour accéder au projecteur ..............28 (FR) Accès au projecteur à l’aide de la fonction Recherche de projecteur automatique ........28 (FR) Exécution de présentation d’un fichier à...
  • Seite 89: Caractéristiques

    Caractéristiques Le projecteur est compatible avec la gestion de Fonction Recherche de projecteur réseaux. La connexion à un réseau local (réseau LAN, automatique Local Area Network) vous permet d’exécuter une Si Windows Me ou Windows XP est installé sur votre présentation en utilisant un fichier stocké...
  • Seite 90: Précautions

    • Afin d’éviter toute perte de données, effectuez • Sony et ses concédants ne garantissent pas que le fréquemment des sauvegardes de données. En aucun logiciel ou sa documentation répondent à vos cas, la société...
  • Seite 91: Préparation À L'utilisation De La Fonction De Gestion De Réseaux

    Connexion à un réseau LAN sans fil sans utiliser le point d’accès LAN sans fil (mode poste à poste) Côté gauche du VPL-PX15 Vue avant du VPL-FX51 Emplacement pour PC CARD Câble Carte PC LAN Projecteur sans fil (conforme à...
  • Seite 92: Utilisation De La Carte Pc

    Pour activer la fonction de gestion de réseaux du projecteur, procédez comme suit. x Pour le modèle VPL-PX15 Dans le menu REGL. INSTAL., définissez FONCT ENTREE-B sur ON. Utilisez la souris de l’ordinateur dans la fenêtre du Pour plus d’informations, reportez-vous au mode d’emploi...
  • Seite 93: Configuration Du Projecteur

    (VPL-FX51) est défini sur ON. • Appuyez sur la touche INPUT de la télécommande fournie ou du panneau de commande du projecteur pour sélectionner INPUT B (VPL-PX15) ou INPUT C (VPL-FX51). La fenêtre Network Projector apparaît. • Réglez le commutateur de sélection PJ/NETWORK de la télécommande sur NETWORK.
  • Seite 94: Réglage De La Date Et De L'heure

    Configuration du projecteur Cliquez sur l’onglet <Name Servers> pour afficher Réglage de la date et de l’heure la boîte de dialogue <Name Servers>, puis définissez les options requises. L’heure s’affiche sur la barre des tâches de la fenêtre Network Projector. Pour régler la date et l’heure, suivez les étapes ci-dessous.
  • Seite 95: Configuration D'un Environnement De Réseau Sans Fil - Si Une Carte Pc Lan Sans Fil Vaio Ou Orinoco Est Utilisée

    Dans le menu Star, cliquez sur Control Panel dans Utilisation d’un point d’accès LAN sans fil la fenêtre Network Projector. Configurez le point d’accès sur lequel vous vous Cliquez deux fois sur l’icône Network connectez, comme suit. Connections. A partir du menu Start (démarrer) de la fenêtre La fenêtre apparaît et les icônes réseau disponibles Network Projector, cliquez sur Control Panel sont affichées.
  • Seite 96 Remarques Remarques • Utilisez des cartes PC LAN sans fil du même • Contactez un personnel Sony qualifié si vous constructeur pour le projecteur et l’ordinateur. rencontrez des problèmes lors de l’utilisation de la • Si le mode poste à poste (Ad-hoc) est configuré sur carte PC LAN sans fil Sony spécifiée/recommandée.
  • Seite 97: Configuration Du Mot De Passe

    Configuration du mot de passe Association d’une application à la touche FUNCTION de la Vous pouvez définir un mot de passe afin d’empêcher télécommande l’accès aux utilisateurs du réseau à distance. Si vous avez associé une application à la touche A partir du menu Start (démarrer), dans la fenêtre FUNCTION 1 ou 2 de la télécommande fournie, une Network Projector, cliquez sur Control Panel...
  • Seite 98: Configuration À Partir D'un Ordinateur

    Configuration du projecteur Entrez le nom (Name) et le mot de passe Configuration à partir d’un (Password) de l’administrateur (Administrator). ordinateur Si le mot de passe prédéfinie en usine n’a pas été modifiée, saisissez “root” dans la zone de texte Lorsque vous souhaitez saisir des lettres à...
  • Seite 99: Organigrammes De Fonctionnement De Base

    Sélection d’un fichier que vous souhaitez utiliser • Dans le menu REGL. INSTAL, FONCT ENTREE-B pour votre présentation (page 22) (VPL-PX15) ou FONCT ENTREE-C (VPL-FX51) est défini sur ON. Sélectionnez le fichier PowerPoint souhaité dans la boîte de dialogue Open File (Ouvrir). Le visualiseur de •...
  • Seite 100 Organigrammes de fonctionnement de base Lancement d’un diaporama à l’aide d’un Projection d’un fichier Excel ou Word fichier image stocké dans le projecteur ou stocké dans un ordinateur la carte mémoire Vous pouvez projeter un fichier Excel ou Word stocké Vous pouvez lancer la lecture d’un diaporama à...
  • Seite 101: Opérations À Partir D'un Ordinateur

    Connexion à Internet Opérations à partir d’un ordinateur Démarrage de Internet Browser (page 27) Exécution d’une présentation en utilisant Cliquez deux fois sur l’icône Internet Browser. un fichier créé à l’aide de PowerPoint Vous pouvez contrôler une présentation en utilisant un Exécution d’une présentation à...
  • Seite 102 Organigrammes de fonctionnement de base Projection d’une image sur le projecteur à Projection d’un fichier Excel ou Word sur l’aide d’un fichier stocké sur un le projecteur ordinateur. Vous pouvez afficher un fichier Excel ou Word sur le projecteur à partir d’un ordinateur. Vous pouvez projeter une image sur le projecteur à...
  • Seite 103 Projection d’une image ou exécution d’un Gestion de fichiers à l’aide du diaporama sur le projecteur en utilisant un Gestionnaire de fichiers fichier stocké dans le projecteur Vous pouvez ajouter des fichiers stockés dans un ordinateur à la mémoire du projecteur ou supprimer A l’aide d’un fichier image stocké...
  • Seite 104: Opérations À Partir Du Projecteur

    Projector Avant de commencer • Dans le menu REGL. INSTAL, vérifiez que FONCT ENTREE-B (VPL-PX15) ou FONCT ENTREE-C (VPL-FX51) est réglé sur ON. • L’utilisation de la fonction Net Mouse vous permet d’utiliser l’écran du projecteur à l’aide de la souris et du clavier de l’ordinateur.
  • Seite 105 8 Icône du clavier d’écran A propos de la fenêtre Visualiseur de Cliquez sur cette icône pour afficher le clavier d’écran diapositives sur le projecteur. Vous pouvez utiliser le projecteur pour effectuer des paramétrages ou pour entrer une URL à l’aide de la télécommande fournie. Le clavier d’écran comporte deux pages.
  • Seite 106 Opérations à partir du projecteur Opérations à partir d’un ordinateur 2 Boutons (Déplacement de diapositive Lorsque vous souhaitez configurer un diaporama, en haut/en bas) cliquez sur Set Up Show (paramètres du Changent l’ordre d’affichage de diapositive. diaporama) dans le menu View Show (visionner le diaporama).
  • Seite 107 2 Barre de menus Projection d’un fichier Excel à l’aide du visualiseur de feuille de Menu Commande Fonction File Open Ouvre les fichiers stockés travail ou un fichier Word à l’aide (Fichier) (Ouvrir) dans le projecteur. du visualiseur de document Recent Files Ouvre les fichiers (fichiers récents)
  • Seite 108 Opérations à partir du projecteur Opérations à partir d’un ordinateur A propos de la fenêtre Document Viewer Projection d’un fichier Excel ou Word Utilisation d’un fichier stocké dans un ordinateur connecté au réseau LAN Suivez les étapes 1 et 2 dans “Exécution d’une présentation —...
  • Seite 109 6 Bouton (plein écran) Lancement d’un diaporama à Affiche en plein écran une diapositive de votre choix. l’aide de la visionneuse 7 Barre de menus Vous pouvez afficher des miniatures des fichiers Menu Commande Fonction stockés dans le projecteur ou dans une carte mémoire About Indique la version du File (fichier)
  • Seite 110 Opérations à partir du projecteur Opérations à partir d’un ordinateur Sélectionnez le dossier contenant les fichiers image La boîte de dialogue Paramètres du diaporama à afficher dans la boîte de dialogue Folder apparaît. (dossier). Vous pouvez choisir le dossier stocké dans le projecteur ou dans une carte mémoire installée dans le projecteur.
  • Seite 111: Connexion À Internet

    Pour effectuer une sauvegarde après avoir Connexion à Internet modifié les paramètres Cliquez sur Slide Show Setting (paramètres du Cliquez deux fois sur l’icône Internet Browser diaporama) dans le menu Slide Show (diaporama) pour (navigateur Internet) dans la fenêtre Network ouvrir la boîte de dialogue Slide Show Setting, puis Projector.
  • Seite 112: Opérations À Partir D'un Ordinateur

    Avant de commencer • Si le navigateur de votre ordinateur est réglé sur x Pour le modèle VPL-PX15 “Accéder à Internet avec un serveur proxy”, entrez Dans le menu REGL.INSTAL., vérifiez que FONCT l’adresse IP du projecteur dans la zone “Accéder à...
  • Seite 113: Exécution De Présentation D'un Fichier À L'aide Du Visualiseur De Diapositives

    Le bouton INPUT C n’existe pas dans la fenêtre du L’accès au projecteur ouvre la fenêtre Sélection de VPL-PX15. l’application. Les noms et les fonctions des icônes et 8 Bouton MORE... (plus...) des boutons de cette fenêtre sont indiqués ci-après.
  • Seite 114 Opérations à partir d’un ordinateur Pour stocker le fichier sélectionné sur le Exécution d’une présentation projecteur Cliquez pour cocher la case “enregistrer dans Cliquez sur l’icône du visualiseur de présentation projecteur”. Vous pouvez définir un mot de passe dans la fenêtre Sélection de l’application. pour le fichier, si nécessaire.
  • Seite 115 Remarque Si le message “La mémoire du projecteur est saturée” apparaît lorsque vous cliquez sur le bouton Visionner ou Paramétrer, supprimez les fichiers inutiles stockés dans le projecteur à l’aide du Gestionnaire de fichiers (page 37 (FR)), puis essayez d’exécuter de nouveau le diaporama.
  • Seite 116: Projection D'un Fichier Excel À L'aide Du Visualiseur De Feuille De Travail Ou Un Fichier Word À L'aide Du Visualiseur De Document

    Opérations à partir d’un ordinateur 4 Diapositive Projection d’un fichier Excel à Indique la diapositive en cours d’affichage par rapport l’aide du visualiseur de feuille de au diaporama. L’écran du projecteur affiche travail ou un fichier Word à l’aide uniquement cette diapositive. du visualiseur de document 5 Bouton b Précédent Revient à...
  • Seite 117 Exemple: Fenêtre Visualiseur feuille de travail 1 Bouton Sélectionne la cellule inférieure la plus à droite de la feuille de travail affichée. 2 Zone de texte Zoom Cliquer sur ouvre la liste déroulante permettant de sélectionner le niveau d’agrandissement ou de réduction.
  • Seite 118: Projection D'une Image À L'aide De La Visionneuse

    Opérations à partir d’un ordinateur 8 Bouton Fin A propos de la fenêtre affichée lors de Termine ou suspend l’affichage du fichier Word pour l’exécution du visualiseur de documents revenir à la fenêtre Sélection Fichiers. 9 Bouton v Accueil Renvoie à la fenêtre Sélection de l’application. q;...
  • Seite 119 Sélectionnez le fichier image à afficher. A propos de la fenêtre affichée pendant la Cliquez sur Parcourir pour ouvrir la fenêtre de présentation sélection de fichiers d’un ordinateur. Cliquez deux fois sur le fichier souhaité. Le nom du fichier sélectionné est affiché dans la zone de texte Parcourir.
  • Seite 120 Opérations à partir d’un ordinateur Lorsque vous sélectionnez un répertoire à Remarque l’étape 4 Lorsque vous quittez la fenêtre Visionneuse en Les fichiers image contenus dans le répertoire cliquant sur le bouton Fin ou Accueil, les fichiers sélectionné sont répertoriés sur la droite. répertoriés dans la liste Fichier temporaire sont automatiquement supprimés.
  • Seite 121: Utilisation Du Gestionnaire De Fichiers

    Vous pouvez définir un mot de passe pour le A propos de la fenêtre affichée lors de fichier sélectionné lors de cette étape. Spécifiez le l’exécution de la visionneuse mot de passe dans la zone de texte Mot de passe. A partir de maintenant, il est impossible d’ouvrir ce La même fenêtre que celle de “A propos de la fenêtre fichier sans entrer son mot de passe.
  • Seite 122: Contrôle Du Projecteur À Partir D'un Ordinateur

    Les illustrations ci-dessous concernent le modèle VPL- (VPL-PX15) PX15. x Pour le modèle VPL-PX15 Les boutons COLOR TEMP (HIGH, LOW) Cliquez sur le bouton MORE... (plus...) dans la fonctionnent de la même manière que dans le menu.
  • Seite 123: Fonction De Maintenance

    Fonction de maintenance 1 Projector Status (état du projecteur) Vérification des indicateurs sur Affiche l’état en cours du projecteur. le projecteur — si vous procédez 2 Projector (projecteur) à partir d’un ordinateur Affiche les informations sur le projecteur. Vous pouvez vérifier l’état en cours des indicateurs 3 System (système) situés sur le panneau de commande du projecteur sur Affiche la version du système d’exploitation et de...
  • Seite 124 Fonction de maintenance Définition de la fonction Rapport de message  si vous procédez à partir du projecteur Pour utiliser la fonction Rapport de message, définissez les adresses de messagerie, ainsi que la destination et la date d’envoi du message et les fonctions de messagerie utilisées.
  • Seite 125 At: Spécifie l’heure d’envoi d’un message. Définition de la fonction Rapport de Sélectionnez l’heure à partir de la liste déroulante. message  si vous procédez à partir d’un Every Week on Days (chaque semaine sur plusieurs ordinateur jours): Sélectionner cette case permet d’envoyer un message certains jours sélectionnés chaque Pour utiliser la fonction Rapport de message, semaine.
  • Seite 126 Fonction de maintenance 6 Lamp Reminder (rappel pour la lampe) 1 Mail Address (adresse de messagerie) Sélectionner cette case et saisir les heures d’utilisation Saisissez l’adresse de messagerie affectée. Vous de la lampe du projecteur dans la zone de texte vous pouvez saisir jusqu’à...
  • Seite 127: Guide De Dépannage

    PC LAN sans fil Sony spécifiée/recommandée, contactez un technicien Sony qualifié. L’ordinateur ne parvient pas à accéder • Le paramétrage de FONCT ENTREE-B (VPL-PX15) ou FONCT ENTREE-C au projecteur. (VPL-FX51) dans le menu REGL. INSTAL est incorrect.
  • Seite 128: Navigateur Internet

    (page 27 (FR) ou page 28 (FR)). Le logiciel du projecteur est arrêté. L’écran du projecteur s’immobilise. t Une fois que FONCT ENTREE-B (VPL-PX15) ou FONCT ENTREE-C (VPL-FX51) dans le menu REGL. INSTAL est fichier PowerPoint ou sur OFF, réinitialisez-le sur ON.
  • Seite 129: Antes Del Uso

    Indice Antes del uso Características ............5 (ES) Precauciones ............. 6 (ES) Acerca de este manual ..........6 (ES) Preparativos Preparativos para utilizar la función de red .... 7 (ES) Configuración de sistema ..........7 (ES) Uso de la tarjeta de PC ........... 8 (ES) Ajuste de la función de red ..........
  • Seite 130 Indice Operaciones mediante un ordenador ....28 (ES) Preparativos ..............28 (ES) Inicio del explorador para tener acceso al proyector ... 28 (ES) Acceso al proyector mediante la función Búsqueda automática del proyector ......... 28 (ES) Realización de presentaciones con el Visor de diapositivas ..........
  • Seite 131: Características

    Características El proyector incorporado es compatible con redes. La Función Búsqueda automática del conexión a una red de área local (LAN) permite proyector ejecutar presentaciones utilizando archivos Si el ordenador tiene instalado Windows Me o almacenados en un ordenador conectado mediante la Windows XP, podrá...
  • Seite 132: Precauciones

    “Tarjeta de PC especificados/recomendados”. el proyector. • Sony y sus otorgantes de licencia no garantizan que • Para evitar pérdidas de datos, realice copias de el software o la documentación incluida cumpla los seguridad de los datos con frecuencia.
  • Seite 133: Preparativos Para Utilizar La Función De Red

    Cable LAN IEEE802.11b) hub/router Conexión a una LAN inalámbrica sin utilizar el punto de acceso a LAN inalámbrica (modo Peer to Peer) Lateral izquierdo del VPL-PX15 Frontal del VPL-FX51 Cable Ranura de PC CARD Tarjeta de PC de Proyector LAN inalámbrica...
  • Seite 134: Uso De La Tarjeta De Pc

    Uso de la tarjeta de PC mando a distancia en NETWORK. No es posible conectar un ratón y un teclado al La ranura de PC CARD de ENTR B (VPL-PX15) o proyector. ENTR C (VPL-FX51) del proyector acepta una tarjeta de PC Tipo II PCMCIA.
  • Seite 135: Configuración Del Proyector

    • Encienda el proyector con la tecla \/1 del mando a distancia suministrado o del panel de control de dicho proyector. • Compruebe que FUNCION ENTR B (VPL-PX15) o FUNCION ENTR C (VPL-FX51) del menú AJUSTE Haga clic en la ficha Projector (Proyector) e INST está...
  • Seite 136: Ajuste De La Fecha Y Del Reloj

    Configuración del proyector Ajuste de la fecha y del reloj El reloj se muestra en la barra de tareas de la ventana Network Projector. Para ajustar la fecha y hora, siga estos pasos. En el menú Start (Inicio), haga clic en Control Panel (Panel de control) en la ventana Network Haga clic en la ficha Name Servers (Servidores de Projector (Proyector de red).
  • Seite 137: Ajuste Del Entorno De Lan Inalámbrica - Cuando Se Utiliza Una Tarjeta De Configuración De Cero

    Configuración del entorno de Ajuste del entorno de LAN LAN inalámbrica — cuando se inalámbrica — cuando se utiliza utiliza una tarjeta de PC de LAN una tarjeta de configuración de inalámbrica VAIO u ORiNOCO cero Ajuste la dirección IP, los servidores de nombres y las Ajuste IP address (Dirección IP), Name servers redes inalámbricas.
  • Seite 138 • Utilice tarjetas de PC de LAN inalámbricas del mismo fabricante para el proyector y el ordenador. • Póngase en contacto con personal especializado Sony • Si Peer to Peer (Ad-hoc) está configurado en uno de si se produce algún problema al utilizar la tarjeta de los ordenadores conectados, realice el paso 1 y, a PC de LAN inalámbrica Sony especificada/...
  • Seite 139: Ajuste De La Contraseña

    Ajuste de la contraseña Asignación de un software de aplicación a la tecla FUNCTION Puede definir una contraseña como protección frente al del mando a distancia acceso de usuarios remotos en la red. Si asigna una aplicación a la tecla FUNCTION 1 o 2 En el menú...
  • Seite 140: Configuración Mediante Un Ordenador

    Configuración del proyector Introduzca el nombre (Name) y contraseña Configuración mediante un (Password) del administrador (Administrator). ordenador Si no ha cambiado la contraseña establecida en fábrica, introduzca “root” en el cuadro de texto Si desea utilizar un teclado para introducir las letras, Name (Nombre).
  • Seite 141: Diagramas De Funcionamiento Básico

    LAN. • El proyector y el ordenador están encendidos. Haga doble clic en el icono Presentation Viewer. • FUNCION ENTR B (VPL-PX15) o FUNCION ENTR C (VPL-FX51) está ajustado en ON en el menú AJUSTE INST. Selección del archivo que desee utilizar para la •...
  • Seite 142 Diagramas de funcionamiento básico Proyección de un archivo Excel o Word Ejecución de presentaciones de almacenado en un ordenador diapositivas utilizando archivos de imagen almacenados en el proyector o en Es posible proyectar archivos Excel o Word la tarjeta de memoria almacenados en un ordenador mediante el uso del proyector.
  • Seite 143: Operaciones Mediante Un Ordenador

    Conexión a Internet Operaciones mediante un ordenador Inicio del Explorador de Internet (página 27) Haga doble clic en el icono Internet Browser. Realización de una presentación utilizando un archivo creado con PowerPoint Realización de una presentación mediante la función Escritorio remoto Puede controlar una presentación utilizando un archivo creado con PowerPoint mediante un ordenador.
  • Seite 144 Diagramas de funcionamiento básico Proyección de un archivo Excel o Word en Proyección de una imagen en el proyector el proyector utilizando un archivo almacenado en un ordenador Es posible mostrar un archivo Excel o Word en el proyector mediante un ordenador. Es posible proyectar una imagen en el proyector mediante el uso de un ordenador.
  • Seite 145 Gestión de archivos con el Administrador Proyección de una imagen o realización de una presentación de diapositivas en el de archivos proyector utilizando un archivo almacenado en éste Puede añadir archivos guardados en un ordenador al almacenaje del proyector o eliminar archivos Es posible proyectar en el proyector un archivo de guardados en éste.
  • Seite 146: Operaciones Mediante El Proyector

    Nombres y funciones de la ventana Preparativos Network Projector Antes de comenzar • Compruebe que FUNCION ENTR B (VPL-PX15) o FUNCION ENTR C (VPL-FX51) del menú AJUSTE INST está ajustado en ON. • La utilización de la función Ratón de red permite usar la pantalla del proyector con el ratón y el teclado...
  • Seite 147: Realización De Presentaciones De Archivos De Powerpoint Con El Visor De Diapositivas

    8 Icono de teclado en pantalla Acerca de la ventana Visor de diapositivas Al hacer clic en el icono, aparece el teclado en la pantalla del proyector. Puede utilizar el proyector para configuraciones o introducir un URL utilizando el mando a distancia suministrado. El teclado en pantalla dispone de dos páginas.
  • Seite 148 Operaciones mediante el proyector Operaciones mediante un ordenador Si desea configurar la presentación, haga clic en 2 Botones (desplazamiento de la Set Up Show (Configurar presentación) en el menú diapositiva hacia arriba/abajo) View Show (Ver Presentación). Cambia el orden de presentación de la diapositiva. El cuadro de diálogo Set Up Show se abre.
  • Seite 149: Proyección De Un Archivo Excel Con El Visor De Hojas De Trabajo O De Un Archivo Word Con El Visor De Documentos

    2 Barra de menús Proyección de un archivo Excel Menú Comando Función con el Visor de hojas de trabajo File Open (Abrir) Abre archivos almacenados o de un archivo Word con el (Archivo) en el proyector. Visor de documentos Recent Files Abre los archivos (Archivos recientemente utilizados...
  • Seite 150 Operaciones mediante el proyector Operaciones mediante un ordenador Acerca de la ventana Visor de Projección de archivos Excel o Word documentos Uso de un archivo almacenado en un ordenador conectado a la LAN 1 Barra de menús Realice los pasos 1 y 2 del apartado “Realización de presentaciones –...
  • Seite 151: Ejecución De Presentaciones De Diapositivas Utilizando El Visor De Imágenes

    5 Botón (Información) Ejecución de presentaciones de Abre el cuadro de diálogo de información de la diapositivas utilizando el Visor diapositiva seleccionada. de imágenes 6 Botón (Pantalla completa) Es posible mostrar imágenes en miniatura de los Muestra la ventana en pantalla completa de una archivos almacenados en el proyector o en una tarjeta diapositiva elegida.
  • Seite 152 Operaciones mediante el proyector Operaciones mediante un ordenador Si desea configurar la diapositiva, como aplicar el Visualización de imágenes en pantalla zoom o giro en una imagen, haga clic en Slide completa Show Setting (Ajuste de la presentación) en el menú...
  • Seite 153: Conexión A Internet

    Para realizar el almacenamiento después de Conexión a Internet cambiar los ajustes Haga clic en Slide Show Setting (Ajuste de la Haga doble clic en el icono Internet Browser presentación) en el menú Slide Show para abrir el (Explorador de Internet) de la ventana Network cuadro de diálogo Slide Show Setting y cambie los Projector.
  • Seite 154: Operaciones Mediante Un Ordenador

    Establezca la entrada al proyector en el valor continuación, en Service Manager para visualizar la INPUT B (VPL-PX15) o INPUT C (VPL-FX51). ventana de control. En la ventana de control, pulse B para utilizar esta opción una vez o ajuste el modo de Encienda el ordenador.
  • Seite 155: Realización De Presentaciones Con El

    Seleccionan la entrada que recibe el proyector. Selección de aplicación El botón INPUT C no existe en la ventana para el VPL-PX15. Al tener acceso al proyector se abre la ventana Selección de aplicación. A continuación se muestran 8 Botón MORE... (MÁS...) los nombres y funciones de los iconos y botones de la Abre la ventana de control del proyector.
  • Seite 156 Operaciones mediante un ordenador Para almacenar el archivo seleccionado en el Realización de una presentación proyector Haga clic en el icono Visor de presentación de la Haga clic para marcar la casilla de verificación ventana Selección de aplicación. “guardar en proyector”. Puede definir la contraseña Aparece la ventana Buscar En.
  • Seite 157 Nota Si aparece el mensaje “Memoria del proyector llena.” al hacer clic en el botón Ver o Configurar, elimine archivos innecesarios almacenados en el proyector mediante el administrador de archivos (página 37 (ES)) y, a continuación, intente realizar la presentación de nuevo.
  • Seite 158: Proyección De Un Archivo Excel Con El Visor De Hojas De Trabajo O De Un Archivo Word Con El Visor De Documentos

    Operaciones mediante un ordenador 4 Diapositiva Proyección de un archivo Excel Muestra la diapositiva actualmente mostrada en la con el Visor de hojas de trabajo presentación. La pantalla del proyector muestra sólo o de un archivo Word con el esta diapositiva. Visor de documentos 5 Botón b Anterior Vuelve al ajuste de animación o a la diapositiva...
  • Seite 159 Ejemplo: Ventana Visor de hoja de trabajo 1 Botón Selecciona la celda situada en el extremo inferior derecho de la hoja de trabajo visualizada. 2 Cuadro de texto Zoom Al hacer clic en se abre la lista desplegable para seleccionar la escala de ampliación o reducción. La hoja de trabajo se amplía o se reduce con la celda seleccionada actualmente centrada.
  • Seite 160: Proyección De Imágenes Con El Visor De Imágenes

    Operaciones mediante un ordenador 8 Botón Fin Acerca de la ventana visualizada mientras Finaliza o suspende la visualización del archivo de el Visor de documentos está en ejecución Word para regresar a la ventana de selección de archivo. 9 Botón v Inicio Le devuelve a la ventana de selección de aplicación.
  • Seite 161 Seleccione un archivo de imagen que desee Acerca de la ventana mostrada mientras mostrar. se realiza la presentación Haga clic en Browse (Examinar) para abrir la ventana de selección de archivo en un ordenador. Haga doble clic en el archivo que desee. El nombre del archivo seleccionado aparece en el cuadro de texto Browse.
  • Seite 162 Operaciones mediante un ordenador Al seleccionar una carpeta en el paso 4 Nota Los archivos de imagen que contiene la carpeta Si sale de la ventana Visor de imágenes haciendo clic seleccionada aparecen enumerados a la derecha. en el botón Fin o Inicio, los archivos enumerados en Archivo temporal se borrarán de forma automática.
  • Seite 163: Uso Del Administrador De Archivos

    Memoria utilizada/capacidad de memoria Acerca de la ventana mostrada mientras se utiliza el Visor de imágenes Aparece la misma ventana que la mostrada en “Acerca de la ventana mostrada mientras se utiliza el Visor de imágenes” en la página 35 (ES). El botón Siguiente de la ventana de selección de archivos .SHO sirve para avanzar hasta la siguiente diapositiva de forma inmediata durante la presentación...
  • Seite 164: Control Del Proyector Mediante Un Ordenador

    Para obtener información detallada sobre los botones, consulte el manual de instrucciones del proyector. Las ilustraciones mostradas en los siguientes pasos corresponden al VPL-PX15. (VPL-PX15) x Para VPL-PX15 Los botones COLOR TEMP (HIGH, LOW) y Haga clic en el botón MORE... (MÁS...) de la funcionan igual que los ajustes de los menús.
  • Seite 165: Funciones De Mantenimiento

    Características de la función Informe por Aparece la ventana Information (Información). correo electrónico La ilustración siguiente corresponde al VPL-PX15. • Informa periódicamente sobre el estado de instalación del proyector, datos del usuario, etc. Puede especificar la fecha de transmisión de los mensajes de correo (Regular Report (Informe estándar)).
  • Seite 166 Funciones de mantenimiento Haga clic en la ficha Server (Servidor). Configuración de la función Informe por Se abrirá la ventana de configuración del servidor correo electrónico de correo. Para utilizar la función Informe por correo electrónico, defina las direcciones de correo a las que se va a enviar un mensaje y la fecha de envío del mismo, así...
  • Seite 167 Establezca el tiempo de envío de un correo tal como se Configuración de la función Informe por indica a continuación: correo electrónico — cuando funciona At: (HORA): Especifica la hora a la que se enviará desde un ordenador un correo. Seleccione la hora en la lista desplegable.
  • Seite 168 Funciones de mantenimiento 6 Lamp Reminder (Recordatorio de lámpara) 1 Mail Address (Dirección de correo) Al seleccionar esta casilla de verificación e introducir Escriba la dirección de correo asignada. Puede escribir las horas utilizadas de la lámpara del proyector en el hasta 128 caracteres.
  • Seite 169: Solución De Problemas

    Si utiliza la tarjeta de PC de LAN inalámbrica Sony especificada, consulte con personal Sony especializado. El ordenador no puede acceder al • El ajuste de FUNCION ENTR B (VPL-PX15) o FUNCION ENTR C (VPL-FX51) del menú AJUSTE INST no es correcto. proyector.
  • Seite 170 El software del proyector se congela. La pantalla del proyector se congela. t Una vez ajustado FUNCION ENTR B (VPL-PX15) o FUNCION ENTR C (VPL-FX51) del menú AJUSTE INST en el valor OFF, vuelva a ajustarlo en Hay una contraseña definida para el proyector o el archivo.
  • Seite 171: Einführung

    Inhalt Einführung Merkmale und Funktionen ........5 (DE) Sicherheitsmaßnahmen ..........6 (DE) Zu dieser Bedienungsanleitung ....... 6 (DE) Vorbereitungen Vorbereitungen zum Arbeiten mit der Netzwerkfunktion ........... 7 (DE) Systemkonfiguration ............7 (DE) Verwenden einer PC-Karte ..........8 (DE) Einstellungen für die Netzwerkfunktion ......8 (DE) Verwenden der Fernbedienung........
  • Seite 172 Inhalt Ausführen einer Bildschirmpräsentation mit dem Bild-Viewer ............. 25 (DE) Herstellen einer Verbindung zum Internet ....27 (DE) Arbeiten mit der Remotedesktop-Funktion....27 (DE) Betrieb von einem Computer aus ......28 (DE) Vorbereitungen ............. 28 (DE) Starten des Browsers, um auf den Projektor zuzugreifen ..........
  • Seite 173: Merkmale Und Funktionen

    Merkmale und Funktionen Der Projektor ist netzwerkfähig. Wenn Sie den Automatische Projektorsuchfunktion Projektor an ein lokales Netzwerk (LAN) anschließen, Wenn Windows Me oder Windows XP auf dem können Sie eine Präsentation mit einer Datei Computer installiert ist, können Sie problemlos auf ausführen, die auf einem Computer im selben LAN den Web-Browser des Projektors zugreifen, indem Sie gespeichert ist.
  • Seite 174: Sicherheitsmaßnahmen

    • Einige der Abbildungen in dieser Anleitung können fehlerfrei funktioniert. sich von der tatsächlichen Anwendungssoftware • Sony und seine Lizenzgeber übernehmen keine Haftung und unterscheiden. Sie haben keinen Anspruch auf Schadenersatz irgendwelcher Art für Schäden, die im Zusammenhang mit der Verwendung der Software oder der dazugehörigen Dokumentation...
  • Seite 175: Vorbereitungen Zum Arbeiten Mit Der Netzwerkfunktion

    PC-Karteneinschub LAN-Kabel an Hub/Router Computer Computer Drahtlose LAN-PC-Karte (IEEE802.11b-kompatibel) LAN-Kabel Hub/Router Anschließen an ein drahtloses LAN ohne drahtlosen LAN-Zugriffspunkt (Peer-to- Peer-Modus) Linke Seite des VPL-PX15 PC-Karteneinschub Vorderseite des VPL-FX51 Drahtlose LAN-PC- Projektor LAN- Karte) (IEEE802.11b- Kabel kompatibel) Anschluß ETHER Computer...
  • Seite 176: Verwenden Einer Pc-Karte

    Vorbereitungen zum Arbeiten mit der Netzwerkfunktion Verwenden einer PC-Karte Verwenden der Fernbedienung Der PC-Karteneinschub an INPUT B (VPL-PX15) Wenn Sie den Projektor zum Konfigurieren des Projektors, Ausführen einer Präsentation usw. oder INPUT C (VPL-FX51 am Projektor ist für eine bedienen wollen, verwenden Sie die mitgelieferte PCMCIA-PC-Karte des Typs II geeignet.
  • Seite 177: Konfigurieren Des Projektors

    • Drücken Sie die Taste INPUT auf der mitgelieferten (Standort), “Installation”, “Lens” (Objektiv) und Fernbedienung oder dem Bedienfeld des Projektors, “Memo” aus. und wählen Sie INPUT B (VPL-PX15) oder INPUT C (VPL-FX51) aus. Das Fenster “Network Projector” wird angezeigt. • Stellen Sie den Wählschalter PJ/NETWORK auf der Fernbedienung auf NETWORK.
  • Seite 178: Einstellen Von Datum Und Uhrzeit

    Konfigurieren des Projektors Einstellen von Datum und Uhrzeit Die Uhrzeit wird in der Task-Leiste des Fensters “Network Projector” angezeigt. Zum Einstellen von Datum und Uhrzeit gehen Sie wie in den Schritten unten erläutert vor. Klicken Sie vom Menü “Start” aus auf “Control Klicken Sie auf die Registerkarte “Name Servers”...
  • Seite 179: Einrichten Einer Drahtlosen Lan-Verbindung - Bei Verwendung Einer Konfigurationslosen Karte

    Einrichten einer drahtlosen LAN- Konfigurieren einer drahtlosen Verbindung — bei Verwendung LAN-Umgebung — bei Verwendung einer konfigurationslosen Karte einer drahtlosen VAIO- oder ORiNOCO-LAN-PC-Karte Geben Sie “IP address”, “Name servers” und “Wireless Networks” (drahtlose Netzwerke) an. Geben Sie “IP address”, “Name servers” und “Wireless Networks”...
  • Seite 180 11 ein. erläutert vor und geben dieselbe Zugriffspunkt-ID und Hinweise denselben Verschlüsselungsschlüssel wie am • Wenden Sie sich an qualifiziertes Personal von Sony, Computer sowie wahlweise einen Spitznamen für den falls beim Arbeiten mit der spezifizierten/ Projektor ein. empfohlenen drahtlosen LAN-PC-Karte von Sony •...
  • Seite 181: Definieren Eines Kennworts

    Zuweisen einer Definieren eines Kennworts Anwendungssoftware zur Taste Sie können zum Schutz vor Zugriff durch entfernte FUNCTION auf der Fernbedienung Netzwerkbenutzer ein Kennwort definieren. Wenn Sie der Taste FUNCTION 1 oder 2 auf der Klicken Sie vom Menü “Start” aus auf “Control mitgelieferten Fernbedienung eine Anwendung Panel”...
  • Seite 182: Konfigurieren Von Einem Computer Aus

    Konfigurieren des Projektors Geben Sie “Name” und “Password” für den Konfigurieren von einem “Administrator” ein. Computer aus Wenn sich eines Kennworts nicht von der werkseitig eingestellten unterscheidet, geben Sie Wenn Sie Ihre Eingaben über eine Tastatur vornehmen “root” in das Textfeld “Name” ein. wollen, führen Sie die Konfiguration von einem Das Fenster “Setup”...
  • Seite 183: Flußdiagramme Für Die Grundfunktionen

    FUNKT.INPUT-C (VPL-FX51) im Menü Doppelklicken Sie auf das Symbol für den “Presentation ANFANGSWERTE ist auf EIN gesetzt. Viewer”. • Am Projektor ist der Eingang INPUT B (VPL-PX15) oder INPUT C (VPL-FX51) eingestellt. Auswählen der für die Präsentation zu Betrieb vom Projektor aus...
  • Seite 184: Projizieren Einer Auf Einem Computer Gespeicherten Excel- Oder Word-Datei

    Betrieb von einem Computer aus Projizieren einer auf einem Computer Ausführen einer Bildschirmpräsentation gespeicherten Excel- oder Word-Datei mit einer im Projektor oder auf der Speicherkarte gespeicherten Bilddatei Sie können eine auf einem Computer in demselben LAN gespeicherte Excel- oder Word-Datei projizieren, Sie können eine Bildschirmpräsentation mit einer im indem Sie nur den Projektor bedienen.
  • Seite 185: Ausführen Einer Präsentation Mit Einer In Powerpoint Erstellten Datei

    Herstellen einer Verbindung zum Internet Betrieb von einem Computer aus Ausführen einer Präsentation mit einer in Starten des “Internet Browser” (Seite 27) PowerPoint erstellten Datei Doppelklicken Sie auf das Symbol für den “Internet Sie können eine Präsentation, bei der Sie eine mit Browser”.
  • Seite 186: Projizieren Einer Excel- Oder Word-Datei Mit Dem Projektor

    Betrieb von einem Computer aus Projizieren einer Excel- oder Word-Datei Projizieren eines Bildes mit dem Projektor unter Verwendung einer auf dem mit dem Projektor Computer gespeicherten Datei Sie können eine Excel- oder Word-Datei computergesteuert über den Projektor projizieren. Sie können ein Bild vom Computer aus auf den Projektor übertragen und projizieren.
  • Seite 187: Verwalten Von Dateien Mit Dem Datei-Manager

    Projizieren eines Bildes oder Ausführen Verwalten von Dateien mit dem Datei- einer Bildschirmpräsentation mit dem Manager Projektor unter Verwendung einer im Sie können auf einem Computer gespeicherte Dateien Projektor gespeicherten Datei in den Speicher des Projektors übertragen oder Dateien im Projektor löschen. Wenn Sie eine im Projektor oder auf einer PC- Speicherkarte gespeicherte Bilddatei verwenden, Starten eines Web-Browsers...
  • Seite 188: Betrieb Vom Projektor Aus

    2 Symbol “Remote Desktop” (Remotedesktop) Stellen Sie als Eingang für den Projektor INPUT B Doppelklicken Sie auf dieses Symbol, wenn Sie die (VPL-PX15) oder INPUT C (VPL-FX51) ein. Remotedesktop-Funktion verwenden wollen. Das Fenster “Network Projector” wird angezeigt. 3 Symbol “Presentation Viewer”...
  • Seite 189: Das Fenster "Slide Viewer" (Folien-Viewer)

    Auch wenn kein Computer an den Projektor 7 IP-Adresse angeschlossen ist, können Sie die Präsentation starten, Gibt die IP-Adresse des Projektors an. Sie können sie und zwar mit einer Datei im Projektor oder auf der überprüfen, wenn Sie von einem Computer aus auf den Speicherkarte, die in den PC-Karteneinschub Projektor zugreifen.
  • Seite 190: Die Hilfe Für Den Folien-Viewer

    Betrieb vom Projektor aus 2 Schaltflächen (Verschieben der Folie Wählen Sie den Ordner mit der PowerPoint-Datei nach oben/unten) (.ppt- oder .pps-Datei) aus, die Sie für die Zum Ändern der Reihenfolge, in der die Folien Präsentation verwenden wollen, und doppelklicken angezeigt werden. Sie dann auf diese Datei.
  • Seite 191: Das Fenster "Worksheet Viewer" (Arbeitsblatt-Viewer)

    2 Menüleiste Projizieren einer Excel-Datei mit dem Arbeitsblatt-Viewer bzw. Menu (Menü) Befehl Funktion Open (Öffnen) Öffnen der im Projektor File (Datei) einer Word-Datei mit dem gespeicherten Dateien. Dokument-Viewer Recent Files Öffnen der zuletzt verwendeten (Letzte Dateien) Dateien, die im Untermenü angezeigt werden.
  • Seite 192: Das Fenster "Document Viewer" (Dokument-Viewer)

    Betrieb vom Projektor aus Das Fenster “Document Viewer” Projizieren einer Excel- oder Word-Datei (Dokument-Viewer) Verwenden einer Datei auf einem Computer im Gehen Sie wie in Schritt 1 und 2 unter “Ausführen einer Präsentation - Verwenden einer Datei auf einem Computer im LAN” auf Seite 22 (DE) erläutert vor.
  • Seite 193: Die Hilfe Zum Arbeitsblatt-Viewer Oder Dokument-Viewer

    3 Schaltfläche (Einstellungen für Die Hilfe zum Arbeitsblatt-Viewer oder Bildschirmpräsentation) Dokument-Viewer Zum Aufrufen des Dialogfeldes “Setup slide show” Näheres zum Arbeiten mit dem Arbeitsblatt-Viewer zum Zoomen, Drehen usw. oder Dokument-Viewer finden Sie in der Hilfe. Wenn 4 Schaltfläche (Präsentation vorführen) Sie auf die Schaltfläche in der Symbolleiste klicken, Wenn Sie auf die Schaltfläche klicken, wird das...
  • Seite 194: Anzeigen Eines Bildes In Voller Bildschirmgröße

    Betrieb vom Projektor aus Betrieb vom Projektor aus Wenn Sie die Folie einrichten, also ein Bild Anzeigen eines Bildes in voller beispielsweise zoomen oder drehen wollen, klicken Bildschirmgröße Sie auf “Slide Show Setting” (Einstellungen für Sie können ein Miniaturbild, das Sie vom Hauptfenster Bildschirmpräsentation) im Menü...
  • Seite 195: Die Hilfe Für Den Bild-Viewer

    Herstellen einer Verbindung zum Geben Sie den Dateinamen ein, und klicken Sie Internet auf die Schaltfläche OK. Die gespeicherten Dateien werden im Dialogfeld Doppelklicken Sie auf das Symbol für den “Load Slide show setting file” (Einlesen der Einstellungsdatei für Bildschirmpräsentation) Internet-Browser im Fenster “Network Projector”.
  • Seite 196: Betrieb Von Einem Computer Aus

    Komponente “Universal Plug and Play” hinzufügen. Stellen Sie als Eingang für den Projektor INPUT B Klicken Sie auf “Systemsteuerung”, und wählen Sie (VPL-PX15) oder INPUT C (VPL-FX51) ein. “Software”. Klicken Sie im Menü “Start” auf “Programs”, Schalten Sie den Computer ein.
  • Seite 197: Ausführen Der Präsentation Einer Powerpoint-Datei Mit Dem Folien-Viewer

    7 Schaltflächen für die Eingangswahl Bezeichnungen und Funktionen im Zum Auswählen des Eingangs am Projektor. Fenster “Anwendung wählen” Die Schaltfläche INPUT C ist im Fenster für den VPL- PX15 nicht vorhanden. Wenn Sie auf den Projektor zugreifen können, wird das Fenster “Anwendung wählen” geöffnet. Im 8 Schaltfläche MORE...
  • Seite 198: Betrieb Von Einem Computer Aus

    Betrieb von einem Computer aus So speichern Sie die ausgewählte Datei im Ausführen einer Präsentation Projektor Aktivieren Sie durch Klicken das Kontrollkästchen Klicken Sie auf das Symbol für den Präsentations- “Im Projektor speichern”. Viewer im Fenster “Anwendung wählen”. Falls erforderlich, können Sie ein Kennwort für die Das Fenster “Suchen in”...
  • Seite 199: Informationen Zum Fenster, Das Während Der Präsentation Angezeigt Wird

    Hinweis Wenn Sie auf die Schaltfläche “Vorführen” oder “Einrichten” klicken und die Meldung “Projektorspeicher ist voll.” erscheint, löschen Sie nicht benötigte Dateien im Projektor mit dem Datei- Manager (Seite 37 (DE)). Versuchen Sie anschließend erneut, die Bildschirmpräsentation auszuführen. Wenn die Meldung “Datei ist zu groß.” erscheint, verringern Sie die Dateigröße.
  • Seite 200: Projizieren Einer Excel-Datei Mit Dem Arbeitsblatt-Viewer Bzw Einer Word-Datei Mit Dem Dokument-Viewer

    Betrieb von einem Computer aus 4 Folie Projizieren einer Excel-Datei mit Gibt die momentan angezeigte Folie in der dem Arbeitsblatt-Viewer bzw. Bildschirmpräsentation an. Auf dem Projektionsschirm einer Word-Datei mit dem wird nur diese Folie angezeigt. Dokument-Viewer 5 Schaltfläche “b Zurück” Schaltet während der Bildschirmpräsentation zur Sie können eine Excel- oder Word-Datei vorherigen Folie oder Animationseinstellung zurück.
  • Seite 201: Das Fenster, Das Angezeigt Wird, Während Der Arbeitsblatt-Viewer Läuft

    1 Schaltfläche Beispiel: Fenster “Arbeitsblatt-Viewer” Zum Auswählen der Zelle unten rechts im angezeigten Arbeitsblatt. 2 Textfeld “Zoom” Wenn Sie auf klicken, wird die Dropdown-Liste geöffnet, in der Sie den Vergrößerungs- bzw. Verkleinerungsfaktor auswählen können. Das Arbeitsblatt wird so vergrößert bzw. verkleinert, daß sich die ausgewählte Zelle in der Projektionss chirmmitte befindet.
  • Seite 202: Das Fenster, Das Angezeigt Wird, Während Der Dokument-Viewer Läuft

    Betrieb von einem Computer aus 8 Schaltfläche “Beenden” Das Fenster, das angezeigt wird, während Zum Beenden oder Unterbrechen der Word- der Dokument-Viewer läuft Dateianzeige und Anzeigen des Fensters “Dateiauswahl”. 9 Schaltfläche “v Anfangsbildschirm” Schaltet zum Fenster “Anwendung wählen” zurück. q; Schaltfläche Zeigt die nächste Seite an.
  • Seite 203: Das Fenster, Das Angezeigt Wird, Während Der Bild-Viewer Läuft

    Wählen Sie die anzuzeigende Bilddatei aus. Das Fenster, das angezeigt wird, während Wenn Sie auf “Durchsuchen” klicken, wird das der Bild-Viewer läuft Dateiauswahlfenster auf einem Computer geöffnet. Doppelklicken Sie auf die gewünschte Datei. Der Name der ausgewählten Datei wird im Textfeld “Durchsuchen”...
  • Seite 204: Ausführen Einer Präsentation Mit Einer Im Projektor Gespeicherten Bilddatei

    Betrieb von einem Computer aus 7 Schaltfläche “v Anfangsbildschirm” Wenn Sie in Schritt 4 einen Ordner wählen Schaltet zum Fenster “Anwendung wählen” zurück. Die im ausgewählten Ordner enthaltenen Bilddateien werden rechts im Fenster aufgelistet. Hinweis Wenn Sie das Fenster “Bild-Viewer” schließen, indem Sie auf die Schaltfläche “Beenden”...
  • Seite 205: Der Datei-Manager

    Dabei können Sie auch ein Kennwort für die Das Fenster, das angezeigt wird, während ausgewählte Datei definieren. Geben Sie das der Bild-Viewer läuft Kennwort in das Textfeld “Kennwort” ein. Damit kann die Datei nur noch geöffnet werden, wenn Es wird dasselbe Fenster wie unter “Das Fenster, das das Kennwort eingegeben wird.
  • Seite 206: Steuern Des Projektors Von Einem Computer Aus

    Einzelheiten zu den Tasten finden Sie in der Bedienungsanleitung zum Projektor. (VPL-PX15) Die Abbildungen in den folgenden Schritten gelten für x Beim VPL-PX15 den VPL-PX15. Die Schaltfläche COLOR TEMP (HIGH, LOW) haben dieselbe Funktion wie die Einstellungen in den Menüs.
  • Seite 207: Wartungsfunktion

    Berichtsfunktion “Administrator” ein. Das Fenster “Information” (Informationen) erscheint. Wozu dient die E-Mail-Berichtsfunktion? Die Abbildung unten gilt für den VPL-PX15. • Sie können festlegen, wann E-Mail-Berichte gesendet werden, und so regelmäßig Berichte mit dem Installationsstatus des Projektors, Benutzerinformationen usw. erstellen lassen (“Regular Report”...
  • Seite 208: Einstellungen Für Die E-Mail-Berichtsfunktion - Beim Betrieb Vom Projektor Aus

    Wartungsfunktion Nachricht gesendet (“Maintenance Reminder” Klicken Sie auf die Registerkarte “Server”. Warnung zur Wartung). Das Fenster zum Einstellen des Mail-Servers erscheint. Einstellungen für die E-Mail- Berichtsfunktion — beim Betrieb vom Projektor aus Wenn Sie die E-Mail-Berichtsfunktion nutzen wollen, legen Sie die E-Mail-Adressen fest, an die E-Mails gesendet werden sollen.
  • Seite 209 Legen Sie folgendermaßen fest, wann die Berichte Einstellungen für die E-Mail- gesendet werden: Berichtsfunktion — beim Betrieb von At (Um): Gibt die Uhrzeit zum Senden der E-Mail- einem Computer aus Berichte an. Wählen Sie die Stundenangabe aus dem Dropdown-Listenfeld. Wenn Sie die E-Mail-Berichtsfunktion nutzen wollen, Every Week on Days (Wöchentlich am): Wenn Sie legen Sie die E-Mail-Adressen fest, an die E-Mails dieses Kontrollkästchen aktivieren, werden die E-...
  • Seite 210: Einstellen Des Mail-Servers - Beim Betrieb Von Einem Computer Aus

    Wartungsfunktion 1 Mail Address (E-Mail-Adresse) 6 Lamp Reminder (Warnung zur Birne) Geben Sie die zugewiesene E-Mail-Adresse ein. Sie Wenn Sie dieses Kontrollkästchen aktivieren und die können bis zu 128 Zeichen eingeben. Nutzungsdauer der Projektorbirne in Stunden in das Textfeld eingeben, wird nach der eingestellten Zeit 2 SMTP eine E-Mail-Nachricht geschickt, die Sie darauf Geben Sie die Adresse des Mail-Servers ein.
  • Seite 211: Störungsbehebung

    Wenden Sie sich an den Hersteller der Karte bzw. des Zugriffspunktes, die Sie verwenden. Wenn Sie die spezifizierte drahtlose LAN-PC-Karte von Sony verwenden, wenden Sie sich an qualifiziertes Fachpersonal von Sony. Der Computer kann nicht auf den • Die Option FUNKT.INPUT-B (VPL-PX15) oder FUNKT.INPUT-C (VPL-FX51) Projektor zugreifen.
  • Seite 212 Das Bild auf dem Projektionsschirm Die Software des Projektors ist abgestürzt. wird angehalten. t Setzen Sie FUNKT.INPUT-B (VPL-PX15) oder FUNKT.INPUT-C (VPL- FX51) im Menü ANFANGSWERTE auf AUS und dann wieder auf EIN. Die Meldung “Für die Datei wurde ein Für den Projektor oder die Datei wurde ein Kennwort definiert.
  • Seite 213: Operazioni Preliminari

    Indice Operazioni preliminari Caratteristiche ............. 5 (IT) Precauzioni ..............6 (IT) Informazioni sul presente manuale ......6 (IT) Preparazione Preparazioni per l’utilizzo della funzione Networking ..............7 (IT) Configurazione di sistema ..........7 (IT) Utilizzo della scheda PC ..........8 (IT) Impostazione per la funzione Networking ......
  • Seite 214 Indice Esecuzione di una presentazione diapositive utilizzando la funzione Visualizzatore immagine ....... 25 (IT) Collegamento a Internet ..........27 (IT) Utilizzo della funzione Desktop remoto ....... 27 (IT) Funzionamento tramite computer ......28 (IT) Preparazioni ..............28 (IT) Avvio del browser per accedere al proiettore ....28 (IT) Accesso al proiettore tramite la funzione Ricerca proiettore automatica ..........
  • Seite 215: Caratteristiche

    Caratteristiche È dunque possibile collegare il proiettore alla rete. Funzione Ricerca proiettore automatica Effettuando il collegamento ad una LAN (Local Area Se sul computer sono stati installati Windows Me o Network), è possibile eseguire presentazioni Windows XP, è possibile accedere facilmente al utilizzando file memorizzati in un computer collegato browser Web del proiettore facendo doppio clic sulla mediante la stessa LAN.
  • Seite 216: Precauzioni

    Precauzioni presente manuale Nel presente manuale vengono descritte le operazioni Avvertenza in rete relative ai proiettori di dati modello VPL-PX15 Prima di spegnere il proiettore o di reimpostarlo e VPL-FX51. utilizzando il telecomando in dotazione, assicurarsi Sono inoltre disponibili file della Guida in linea.
  • Seite 217: Preparazioni Per L'utilizzo Della Funzione Networking

    Collegamento alla rete LAN senza fili senza l’utilizzo del punto di accesso alla LAN senza fili (modo peer to peer) Lato sinistro del modello VPL-PX15 Cavo Lato anteriore del modello VPL-FX51 Slot per PC CARD Scheda PC LAN...
  • Seite 218: Utilizzo Della Scheda Pc

    Prima del funzionamento, impostare su Utilizzo della scheda PC NETWORK l’interruttore di selezione PJ/NETWORK sul telecomando. Lo slot per PC CARD INPUT B (VPL-PX15) o Non è possibile collegare un mouse e una tastiera al INPUT C (VPL-FX51) del proiettore accetta schede proiettore.
  • Seite 219: Configurazione Del Proiettore

    • Accendere il proiettore mediante il tasto #/ 1 sul telecomando in dotazione o sul pannello di controllo del proiettore. • Assicurarsi che FUNZ. INGR. B (VPL-PX15) o Fare clic sulla scheda Projector, quindi inserire i FUNZ. INGR. C (VPL-FX51) nel menu IMPOST.
  • Seite 220: Impostazione Di Data E Ora

    Configurazione del proiettore Impostazione di data e ora Per visualizzare la finestra di dialogo Name Servers, fare clic sulla scheda Name Servers, quindi impostare le voci necessarie. L’orologio viene visualizzato nella barra delle applicazioni della finestra Network Projector. Per impostare la data e l’ora, eseguire le procedure descritte di seguito.
  • Seite 221: Impostazione Di Un Ambiente Lan Senza Fili - Se Viene Utilizzata Una Scheda Non Configurata

    Impostazione di un ambiente LAN Configurazione dell’ambiente senza fili — se viene utilizzata una LAN senza fili — viene utilizzata scheda non configurata una scheda PC LAN senza fili VAIO o ORiNOCO Impostare IP address, Name servers e Wireless Networks. Impostare l’indirizzo IP, il server dei nomi e le reti senza fili.
  • Seite 222 • Se il modo peer to peer (Ad-hoc) viene configurato in • In caso di problemi durante l’utilizzo della scheda PC uno dei computer collegati, eseguire la procedura LAN senza fili Sony specificata/consigliata, descritta al punto 1, quindi la procedura descritta ai contattare il personale Sony qualificato.
  • Seite 223: Creazione Di Una Password

    • Se viene utilizzato il modo peer to peer (Ad-hoc), sul Assegnazione di un programma proiettore e sul computer è necessario impostare un applicativo al tasto FUNCTION indirizzo IP e una Subnet Mask appositamente per sul telecomando questo modo. Se è stata assegnata un’applicazione al tasto Creazione di una password FUNCTION 1 o 2 sul telecomando in dotazione, basterà...
  • Seite 224: Configurazione Tramite Computer

    Configurazione del proiettore Inserire il nome e la password rispettivamente Configurazione tramite nelle caselle di testo Name (Nome) e Password per computer l’area Administrator (Amministratore). Se la Password predefinito non viene modificato, Se si desidera digitare i caratteri mediante una tastiera, inserire “root”...
  • Seite 225: Diagrammi Di Funzionamento Di Base

    Avvio della funzione Visualizzatore presentazioni (pagina 22) • Il proiettore e il computer devono essere attivati. • FUNZ. INGR. B (VPL-PX15) o FUNZ. INGR. C Fare doppio clic sull’icona Presentation Viewer. (VPL-FX51) deve essere impostato su INSER nel menu IMPOST. INST.
  • Seite 226: Proiezione Di Un File Excel O Word Memorizzato In Un Computer

    Diagrammi di funzionamento di base Esecuzione di una presentazione Proiezione di un file Excel o Word memorizzato in un computer diapositive utilizzando un file di immagini memorizzato nel proiettore o nella scheda È possibile proiettare un file Excel o Word memoria memorizzato in un computer sulla stessa rete LAN utilizzando il proiettore.
  • Seite 227 Collegamento a Internet Funzionamento tramite computer Avvio di Internet Browser (pagina 27) Fare doppio clic sull’icona Internet Browser. Esecuzione di una presentazione utilizzando un file creato in PowerPoint Utilizzando un file creato in PowerPoint è possibile Esecuzione di una presentazione tramite controllare una presentazione da un computer.
  • Seite 228 Diagrammi di funzionamento di base Proiezione di un file Excel o Word sul Proiezione di un’immagine sul proiettore proiettore utilizzando un file memorizzato in un computer È possibile proiettare un file Excel o Word utilizzando È possibile proiettare un’immagine sul proiettore il proiettore mediante un computer.
  • Seite 229 Proiezione di un’immagine o esecuzione Gestione dei file tramite la funzione di una presentazione diapositive sul Gestione file proiettore utilizzando un file memorizzato Tramite questa funzione è possibile aggiungere nella nel proiettore memoria del proiettore i file memorizzati in un computer o eliminare i file memorizzati nel proiettore.
  • Seite 230: Funzionamento Tramite Proiettore

    Nomi e funzioni della finestra Network Preparazioni Projector Operazioni preliminari • Confermare che FUNZ. INGR. B (VPL-PX15) o FUNZ. INGR. C (VPL-FX51) nel menu IMPOST. INST. sia impostato su INSER. • La funzione Mouse di rete consente di utilizzare lo schermo del proiettore con il mouse e la tastiera del computer.
  • Seite 231 8 Icona tastiera a schermo Informazioni sulla finestra Slide Viewer Facendo clic sull’icona viene visualizzata la tastiera a (Visualizzatore diapositive) schermo sullo schermo del proiettore. Utilizzando il telecomando in dotazione è possibile utilizzare il proiettore per la configurazione o per la digitazione di un URL.
  • Seite 232 Funzionamento tramite proiettore 4 Pulsante (Slide View) (Visualizza (Visualizza presentazione). Viene visualizzata la finestra di dialogo Set up diapositiva) Show. Visualizza una diapositiva. Per ulteriori informazioni, vedere l’Help (Guida) di Slide Viewer (Visualizzatore diapositive). 5 Pulsante (Slide Show) (Presentazione diapositive) Fare clic su Run (Esegui) dal menu View Show per Esegue una presentazione diapositive.
  • Seite 233 2 Barra dei menu Proiezione di un file Excel Menu Comando Funzione utilizzando la funzione File Open (Apri) Apre i file memorizzati nel Visualizzatore foglio di lavoro o di proiettore. un file Word utilizzando la funzione Recent Files Apre i file impiegati di recente (File recenti) mostrati nel sottomenu.
  • Seite 234 Funzionamento tramite proiettore Informazioni sulla finestra Document Proiezione di un file Excel o Word Viewer (Visualizzatore documenti) Utilizzando un file memorizzato in un computer collegato alla rete LAN Eseguire i procedimenti descritti ai punti 1 e 2 nella sezione relativa all’esecuzione di una presentazione utilizzando un file memorizzato in un computer collegato alla rete LAN a pagina 22 (IT).
  • Seite 235: Esecuzione Di Una Presentazione Diapositive Utilizzando La Funzione Visualizzatore Immagine

    (Impostazione presentazione diapositive) per eseguire Informazioni sulla Guida del Visualizzatore zoomate, rotazioni dell’immagine, ecc. foglio di lavoro o Visualizzatore documenti 4 Pulsante (View Show) (Visualizza Per ulteriori informazioni sul funzionamento del presentazione) Visualizzatore foglio di lavoro o Visualizzatore Facendo clic sul pulsante si apre il sottomenu per far documenti, consultare la Guida, ai cui argomenti è...
  • Seite 236 Funzionamento tramite proiettore Funzionamento tramite proiettore Per i dettagli sui file di impostazione Presentazione Visualizzazione di un’immagine a schermo diapositive, vedere “Salvataggio dell’impostazione intero della presentazione diapositive”. È possibile visualizzare l’immagine a schermo intero Quando si desidera configurare la diapositiva, ad di un’immagine in miniatura selezionata dalla finestra esempio eseguire una zoomata o una rotazione principale.
  • Seite 237: Collegamento A Internet

    Immettere il nome del file, quindi fare clic sul Modificare la selezione delle caselle di controllo di pulsante OK. Slide Show relative alle diapositive. I file salvati vengono visualizzati nella finestra di dialogo Load Slide show setting file (Carica file di Informazioni sulla Guida della funzione impostazioni presentazione diapositive).
  • Seite 238: Funzionamento Tramite Computer

    Ricerca proiettore automatica. Fare clic su Control Impostare l’ingresso del proiettore su INPUT B Panel (Pannello di controllo), quindi selezionare Add/ (VPL-PX15) o su INPUT C (VPL-FX51). Remove Programs (Installazione applicazioni). Avviare il computer. Dal menu Start, selezionare Programs (Programmi), System (Sistema), quindi Service Manager (Gestione Avviare il browser del computer.
  • Seite 239: Esecuzione Di Una Presentazione Di Un File Creato In Powerpoint Utilizzando La Funzione Visualizzatore Diapositive

    Le operazioni successive ai punti sopra elencati Selezionano l’ingresso del proiettore. sono indicate alle pagine da 29 (IT) a 38 (IT). Il pulsante INPUT C non è presente nella finestra per il modello VPL-PX15. Nomi e funzioni della finestra Seleziona applicazione 8 Pulsante MORE... (Continua) Apre la finestra di comando del proiettore.
  • Seite 240: Funzionamento Tramite Computer

    Funzionamento tramite computer Per memorizzare nel proiettore il file Esecuzione di una presentazione selezionato Fare clic per selezionare la casella di controllo Fare clic sull’icona Visualizzatore presentazioni “salva nel proiettore”. della finestra Seleziona applicazione. Se necessario, è possibile impostare una password Viene visualizzata la finestra Cerca In.
  • Seite 241 Nota Se facendo clic sul pulsante Visualizza o Imposta presentazione appare il messaggio “Memoria del proiettore piena”, cancellare i file non necessari memorizzati nel proiettore utilizzando la funzione Gestione file (pagina 37 (IT)), quindi provare di nuovo ad eseguire la presentazione. Se viene visualizzato il messaggio “Le dimensioni del file sono troppo grandi.”, ridurre le dimensioni del file, quindi avviare di nuovo la presentazione diapositive.
  • Seite 242: Proiezione Di Un File Excel Utilizzando La Funzione Visualizzatore Foglio Di Lavoro O Di Un File Word Utilizzando La Funzione Visualizzatore Documenti

    Funzionamento tramite computer 4 Diapositiva Proiezione di un file Excel Diapositiva correntemente visualizzata nella utilizzando la funzione presentazione diapositive. Sullo schermo del proiettore Visualizzatore foglio di lavoro o di viene visualizzata solo questa diapositiva. un file Word utilizzando la funzione 5 Pulsante b Precedente Visualizzatore documenti Per tornare alla diapositiva precedente o...
  • Seite 243 1 Pulsante Esempio: finestra del Visualizzatore foglio di lavoro Seleziona l’ultima cella in basso a destra del foglio di lavoro visualizzato. 2 Casella di testo Zoom Facendo clic su si apre l’elenco a discesa che consente di selezionare il rapporto di ingrandimento o riduzione.
  • Seite 244: Proiezione Di Un'immagine Utilizzando La Funzione Visualizzatore Immagine

    Funzionamento tramite computer qs Pulsanti di scorrimento 6 Pulsante AGGIORNA Ad ogni clic sul pulsante , è possibile spostare Facendo clic su questo pulsante viene visualizzata la l’area visualizzata sul proiettore di una riga verso stessa finestra che appare sul proiettore. sinistra o verso destra.
  • Seite 245 Posizionando il puntatore del mouse su una voce, Informazioni sulla finestra visualizzata le relative istruzioni vengono visualizzate sulla durante l’esecuzione Visualizzatore parte inferiore della finestra. immagine Selezionare un file di immagini da visualizzare. Fare clic su Sfoglia per aprire la finestra di selezione del file sul computer.
  • Seite 246 Funzionamento tramite computer Se al punto 4 viene selezionata una cartella Nota Nella parte destra vengono elencati i file di Quando si esce dalla finestra della funzione immagini contenuti nella cartella selezionata. Visualizzatore immagine facendo clic sul pulsante Fine o Home, i file elencati nel File temporaneo vengono cancellati automaticamente.
  • Seite 247: Utilizzo Della Funzione Gestione File

    Memoria/capacità di memoria utilizzata Informazioni relative alla finestra visualizzata durante l’esecuzione del Visualizzatore immagine Viene visualizzata la stessa finestra che appare nella sezione relativa alle informazioni sulla finestra visualizzata durante l’esecuzione del Visualizzatore immagine a pagina 35 (IT). Il pulsante Successiva nella finestra di selezione del file .SHO consente di passare immediatamente alla diapositiva successiva durante la presentazione diapositive.
  • Seite 248: Controllo Del Proiettore Da Un Computer

    Per ulteriori informazioni sui pulsanti, consultare le istruzioni per l’uso del proiettore. (VPL-PX15) x Per il modello VPL-PX15 Le figure della seguente procedura si riferiscono al I pulsanti COLOR TEMP (HIGH, LOW) hanno la modello VPL-PX15. stessa funzione delle relative impostazioni del menu.
  • Seite 249: Funzione Di Manutenzione

    Viene visualizzata la finestra Information Utilizzo della funzione Rapporto (Informazioni). e-mail La figura riportata di seguito si riferisce al modello VPL-PX15. Operazioni possibili con la funzione Rapporto e-mail • Lo stato dell’installazione del proiettore, le informazioni sull’utente e così via vengono comunicati periodicamente.
  • Seite 250 Funzione di manutenzione Fare clic sulla scheda Server. Impostazione della funzione Rapporto e- Si apre la finestra di configurazione del server di mail — durante il funzionamento mediante posta elettronica. il proiettore Per utilizzare la funzione Rapporto e-mail, impostare gli indirizzi e-mail dei destinatari e la data di invio dei messaggi;...
  • Seite 251 At (Alle): specifica l’ora di invio del messaggio e- Impostazione della funzione Rapporto e- mail. Selezionare l’ora dall’elenco a discesa. mail — durante il funzionamento mediante Every Week on Days (Ogni settimana nei giorni): se un computer si seleziona questa casella, ogni settimana verrà inviato un messaggio e-mail nei giorni selezionati.
  • Seite 252 Funzione di manutenzione 6 Lamp Reminder (Promemoria lampada) 1 Mail Address (Indirizzo e-mail) Se viene selezionata questa casella e vengono digitate Digitare l’indirizzo e-mail assegnato. È possibile le ore di utilizzo della lampada del proiettore nella digitare fino a 128 caratteri. casella di testo, sarà...
  • Seite 253: Guida Alla Soluzione Dei Problemi

    Contattare il produttore della scheda o del punto di accesso in uso. Se si sta utilizzando la scheda PC LAN senza fili Sony specificata, rivolgersi esclusivamente a personale Sony qualificato. • L’impostazione di FUNZ. INGR. B (VPL-PX15) o FUNZ. INGR. C (VPL-FX51) Il computer non può accedere al proiettore.
  • Seite 254: Presentazione

    (pagina 27 (IT) o pagina 28 (IT)). Lo schermo del proiettore è bloccato. Il software del proiettore è bloccato. t Dopo avere impostato FUNZ. INGR. B (VPL-PX15) o FUNZ. INGR. C (VPL-FX51) nel menu IMPOST. INST. su DISIN, reimpostarlo su INSER. Viene visualizzato il messaggio “È...
  • Seite 255 目录 使用之前 特性 ..............5 (CS) 使用前须知 ............6 (CS) 关于本手册 ............6 (CS) 准备工作 使用网络功能的准备 ..........7 (CS) 系统结构 ..............7 (CS) 使用 PC 卡 ............... 8 (CS) 设置网络功能 ............8 (CS) 使用遥控器 ............... 8 (CS) 使用网络鼠标功能 ........... 8 (CS) 设置投影机...
  • Seite 256 目录 使用 Image Viewer(图像浏览器) 进行幻灯片播放 ..........25 (CS) 连接至因特网 ............27 (CS) 使用遥控桌面功能 ..........27 (CS) 从计算机操作 ............. 28 (CS) 准备工作 ..............28 (CS) 启动浏览器访问投影机 ..........28 (CS) 用自动投影机搜索功能访问投影机 .......28 (CS) 用 Slide Viewer(幻灯片浏览器)演示 PowerPoint 文件 ..........29 (CS) 用 Worksheet Viewer(工作表浏览器)投影 Excel 文件或用 Document Viewer(文档浏览器) 投影...
  • Seite 257 特性 本 投 影 机 具 有 网 络 兼 容 性 。 连 接 至 局 域 网 自动投影机搜索功能 (LAN)后,可以用存储在连接于相同局域网上的 计算机中的文件进行演示。可以从远离投影机或与 如果计算机中安装了 Windows Me 或 Windows 投影机位于同一会议室的计算机中打开文件。也可 XP,可以双击计算机上中相应的我的网络视窗投影 以仅将投影机连接至因特网。 机的图标,轻松地访问投影机的网络浏览器。您可 当用计算机的网络浏览器访问投影机时,可以 以立刻开始演示。 从计算机控制投影机。 网络鼠标功能 连接至局域网 利用此功能,可以通过在计算机上显示投影机 本投影机装备有 ETHER (以太)连接器和 PC 视窗并用计算机的鼠标器和键盘来操作投影机进行...
  • Seite 258: 使用前须知

    使用前须知 关于本手册 使用网络功能的准备 本手册说明 VPL-PX15 和 VPL-FX51 数据投 小心 影机的网络操作。 使用附带的遥控器关闭或重设投影机之前, 也可以使用在线帮助文件。当您访问本投影机 请务必退出打开着的所有应用软件。否则,系统 的网络服务器时,将光标停留在各项目上时计算机 可能会发生故障,并且可能无法重新启动网络功 上会出现提示句。 能。 可以从桌面上的 Start(开始)菜单单击 Help (帮助)来打开网络投影机的帮助文件。但投影机 • 推荐的投影机系统要求如下∶ 不支持一些网络特性。单击各应用视窗中工具栏上 – Microsoft Windows 98, Microsoft Windows 98 的 键时,Slide Viewer(幻灯片浏览器)、 SE, Microsoft Windows 2000, Microsoft Worksheet Viewer(工作表浏览器)、Image Windows Me、Microsoft Windows XP...
  • Seite 259: 使用网络功能的准备

    投影机 计算机 局域网电缆 PC CARD 插槽 至网络集线器/路由器 计算机 计算机 无线局域网 PC 卡 (符合 IEEE802.11b) 局域网电缆 至网络集线 器/路由器 不用无线局域网访问接入点连接至无线局域网 (对等连接模式) VPL-PX15 左侧 VPL-FX51 前面 局域网 PC CARD 插槽 电缆 无线局域网 PC 卡 投影机 (符合 IEEE802.11b) ETHER (以太) 连接器 计算机 计算机 局域网电缆...
  • Seite 260: 使用 Pc 卡

    启动计算机的 Internet Explorer 5.0 版或更新 • 指定/推荐 PC 卡的驱动软件在出厂时已安装在投 版。 影机上。不需要也不能再安装其他驱动软件。 输入投影机的 IP 地址。 输入“http://xxx.xxx.xxx.xxx(投影机的 IP 地 有关插入和取出 PC 卡,请参阅投影机的操作手册。 址)/netmouse”。 投影机的视窗出现在计算机上。 设置网络功能 要启动投影机的网络功能,请进行下列设置。 x 用于 VPL-PX15 将安装设置项目单中的输入 B 功能设置为开。 有关详细内容,请参阅投影机的操作手册。 x 用于 VPL-FX51 在安装设置项目单中将输入 C 功能设置为开。 有关详细内容,请参阅投影机的操作手册。 用计算机的鼠标器在显示在计算机上的投影机视 窗中操作。 鼠标器和键盘的操作反映投影机屏幕上的画像信 息,由此可以操作投影机。 注...
  • Seite 261: 设置投影机

    设置之前 • 用附带的遥控器或投影机控制面板上的 #/ 1 键接 通投影机电源。 • 确认安装设置项目单上的输入 B 功能(V P L - PX15)或输入 C 功能(VPL-FX51)设置为开。 • 按附带的遥控器或投影机控制面板上的 INPUT 键 单击 Projector(投影机)标签并输入 Location 选择 INPUT-B(VPL-PX15)或 INPUT C (位置)、Installation(安装)、Lens(镜 (VPL-FX51)。 Network Projector(网络投影 头)和 Memo(备注)。 机)视窗打开。 • 将遥控器上的 PJ/NETWORK 选择开关设置为 NETWORK。...
  • Seite 262: 设置日期和时钟

    设置投影机 单击 Name Servers 标签显示 Name Servers 对 设置日期和时钟 话框,然后设置所需的项目。 时钟显示在 Network Projector(网络投影机) 视窗的任务栏上。若要设置日期和时间,请按以下 步骤操作。 从 Network Projector(网络投影机)视窗的 Start(开始)菜单单击 Control Panel(控制面 板)。 单击 OK 键。 双击 Date/Time(日期/时间)图标。 步骤 2 中的视窗重新出现。 设置日期和时间。 使用无线局域网 PC 卡时 设置 On-board LAN 按以下步骤操作。 建立局域网连接需要设置 IP address 等网络结 在...
  • Seite 263: 设置无线局域网环境-使用零结构卡时

    设置无线局域网环境-使用零结构卡 设置无线局域网环境-使用 VAIO 或 时 ORiNOCO 无线局域网 PC 卡时 设置 IP address、Name servers 和 Wireless 设置 IP address、Name servers 和 Wireless Networks。 Networks。 使用无线局域网访问接入点 从 Network Projector(网络投影机)视窗的 Start(开始)菜单单击 Control Panel(控制面 按以下步骤设置所要连接的访问接入点。 板)。 从 Network Projector(网络投影机)视窗的 双击 Network Connection 图标。 Start(开始)菜单单击 Control Panel(控制面 视窗出现并显示可使用的网络图标。...
  • Seite 264 如果用于访问接入点的频道被设置为 12 至 14, 卡。 则将其设置为 1 至 11 之间的任意频道。 • 如果在所连接的一台计算机上配置对等连接(Ad- hoc),请进行上述步骤 1 后再进行步骤 3 至 6, 注 以在投影机上输入与计算机上相同的 Access Point • 如果在使用指定/推荐的 Sony 无线局域网 PC 卡 ID(访问接入点 ID)和 Encryption Key(加密密 时出现问题,请与有资格的 Sony 专业人员联系。 钥)及可选的 Nickname(昵称)。 • 如果无线局域网卡的厂家和无线局域网访问接入点 • 仅对同一局域网上的一台投影机和计算机选择对等 的厂家不同,则启动密码进行通讯无法正确进行。...
  • Seite 265: 设置口令

    设置口令 将应用软件赋值到遥控器上的 FUNCTION 键 可以为投影机设置口令以防被遥控网络用户访 如 果 将 应 用 软 件 赋 值 到 附 带 的 遥 控 器 上 的 问。 FUNCTION 1 或 2 键,触键即可启动应用软件。 屏幕键盘在出厂时被赋值到 FUNCTION 3 键,您 从 Network Projector(网络投影机)视窗的 不能重新赋值或取消此赋值。 Start(开始)菜单单击 Control Panel(控制面 板)。...
  • Seite 266: 从计算机设置

    设置投影机 打开设置视窗 从计算机设置 启动计算机的浏览器软件(Internet Explorer 当您要用键盘键入字母时,请从计算机设置。 5.0 版或更新版)。 注 输入“http://xxx.xxx.xxx.xxx(投影机的 IP 地 • 如果出厂预设的投影机 IP 地址未改变,在投影机 址)/setup”。 上连接一台计算机用于设置。 如果出厂预设的 IP 地址未改变,则输入“http:/ • 如果计算机浏览器设置为“Access the Internet /192.168.0.1/setup”(使用 On-board LAN using a proxy server(使用代理服务器访问因特 时)。 网)”,在从计算机访问投影机时,请在“Access 如果 IP 地址号码从 0 (零)开始,输入号码时 the Internet without using a proxy server(不使 不需要输入...
  • Seite 267: 基本操作流程图

    启动 Presentation Viewer(演示文稿浏览器)(第 22 页) • 投影机和计算机连接在同一局域网上。 • 投影机和计算机的电源接通。 双击 Presentation Viewer(演示文稿浏览器)图标。 • 在安装设置项目单中将输入 B 功能(VPL-PX15) 或输入 C 功能(VPL-FX51)设置为开。 • 投影机的输入被设置为 INPUT B (VPL-PX15) 或 选择要用于演示的文件 (第 22 页) INPUT C (VPL-FX51)。 在 Open File(打开文件)对话框中选择 PowerPoint 文 件。Slide Viewer(幻灯片浏览器)启动,所选的文件出 现在幻灯片显示上。...
  • Seite 268 基本操作流程图 投影存储在计算机中的 Excel 或 Word 文件 用存储在投影机或内存卡中的图像文件进行幻 灯片播放 可以通过操作投影机,投影存储在相同局域网 上的计算机中的 Excel 或 Word 文件。 使用存储在投影机或内存卡中的图像文件,可 以仅操作投影机进行幻灯片播放。 启动 My Projector(我的投影机) (第 24 页) 启动 Image Viewer(图像浏览器) (第 26 页) 双击 My Projector(我的投影机)图标。 双击 Image Viewer(图像浏览器)图标。 选择要用于投影的文件 (第 24 页) 选择要用于幻灯片播放的文件 (第 26 页) 输入存有要使用文件的计算机名称,并选择...
  • Seite 269: 从计算机操作

    连接至因特网 从计算机操作 用 PowerPoint 建立的文件进行演示 启动 Internet Browser(因特网浏览器) (第 27 页) 可以从计算机用 PowerPoint 建立的文件控制 双击 Internet Browser(因特网浏览器)图标。 演示。 〔使用自动投影搜索功能 启动计算机的网络浏览器 用遥控桌面功能进行演示 时〕 访问投影机 (第 28 页) 访问投影机 (第 28 页) 如果计算机中安装了 Windows XP 启动网络浏览器并输入投 双击我的网络视窗中的图 Professional,则投影机可以在相同的局域网上访 影机的 IP 地址。 标。 问您的计算机,并投影存储在计算机中的所有数据...
  • Seite 270 基本操作流程图 在投影机上投影 Excel 或 Word 文件 用存储在计算机中的文件在投影机上投影图像 可以从计算机操作在投影机上投影 Excel 或 可以从计算机操作将图像投影至投影机。 Word 文件。 〔使用自动投影搜索功能 启动计算机的网络浏览器 时〕 访问投影机 (第 28 页) 〔使用自动投影搜索功能 访问投影机 (第 28 页) 启动计算机的网络浏览器 时〕 访问投影机 (第 28 页) 启动网络浏览器并输入投 双击我的网络视窗中的图 访问投影机 (第 28 页) 影机的 IP 地址。 标。...
  • Seite 271 用存储在投影机中的文件在投影机上投影图像 用 File Manager(文件管理器)管理文件 或进行幻灯片播放 可以将存储于计算机的文件添加到投影机的存 储器或删除存储于投影机的文件。 可以使用存储在投影机或 PC 内存卡上的图像 文件,通过操作计算机在投影机上投影。也可以用 投影机上预设的幻灯片设置文件进行幻灯片播放。 〔使用自动投影搜索功能 启动计算机的网络浏览器 时〕 访问投影机 (第 28 页) 〔使用自动投影搜索功能 访问投影机 (第 28 页) 启动计算机的网络浏览器 时〕 访问投影机 (第 28 页) 启动网络浏览器并输入投 访问投影机 (第 28 页) 双击我的网络视窗中的图 影机的 IP 地址。 标。 启动网络浏览器并输入投...
  • Seite 272: 准备工作

    从投影机操作 Network Projector 视窗中的名称和功能 准备工作 开始之前 • 确认将安装设置项目单中的输入 B 功能(VPL- PX15)或输入 C 功能(VPL-FX51)设置为开。 • 使用网络鼠标器功能,可以用计算机的鼠标器和键 盘操作投影机画面。 有关详情,请参阅第 8 页上的“使用网络鼠标器功 能”一节。 • 使用随机附带的遥控器时,请将 PJ/NETWORK 选择开关切换为 NETWORK(网络)。 打开 Network Projector(网络投影机)视窗 8 9 0 若要进行网络操作而不连接计算机,请在投影 1 My Projector(我的投影机)图标 机上显示 Network Projector 视窗。 浏览投影机中的文件夹。 双击此图标显示...
  • Seite 273: 用 Slide Viewer(幻灯片浏览器)演示 Powerpoint 文件

    8 屏幕键盘图标 关于 Slide Viewer(幻灯片浏览器)视窗 单击此图标在投影机屏幕上显示屏幕键盘。可 以用所附带的遥控器操作投影机以设置或输入 URL。屏幕键盘有两页,单击 Shift(移位)键换 页。 x 关于附带的遥控器 • 附带遥控器上的 PJ/NETWORK 选择开关设置为 NETWORK(网络)时,遥控器上的 TAB(标 签)、ESCAPE(取消)、ENTER(输入) 和箭 头键功能与其键盘上的相同。 • 在屏幕键盘图标中按附带遥控器上的 R CLICK (右击)键打开副菜单。单击 Remote(遥控 器),然后单击 On(启动)可以让您与在屏幕 键盘上一样使用遥控器上的箭头键并选择按键。 1 菜单栏 9 时钟 菜单 命令 功能 0 桌面图标 File(文件) Open(打开)...
  • Seite 274 从投影机操作 (上/下移动幻灯片)键 要设置幻灯片播放时,从 View Show(观看演 改变幻灯片显示的顺序。 示)菜单单击 Set Up Show(设置播放)。 打开 Set Up Show 对话框。 Note View(笔记显示)键 有关详细说明,请参见 Slide Viewer(幻灯片浏 显示幻灯片和扬声器的注释。 览器)的 Help(帮助)。 Slide View(幻灯片显示)键 从 View Show 菜单单击 Run(运行)进行幻灯 显示幻灯片。 片播放。 Slide Show(幻灯片播放)键 进行幻灯片播放。 使用存储在投影机或内存卡上的文件 6 演示清单框 双击 Network Projector(网络投影机)视窗中 单击...
  • Seite 275: 用 Worksheet Viewer(工作表浏览器)投影 Excel 文 件或用 Document Viewer(文档浏览器)投影 Word 文件

    2 菜单栏 用 Worksheet Viewer(工作表浏览 菜单 命令 功能 器)投影 Excel 文件或用 Document Open(打开) 打开存储在投影机中的文件。 File Viewer(文档浏览器)投影 Word Recent Files 打开显示在副菜单上最近用过 (文件) 文件 (最新文件) 的文件。 About(关于) 显示程序的版本画像信息。 可以投影存储在相同局域网上的计算机中的 Close(关闭) 关闭当前显示的文件。 Excel 或 Word 文件。也可以投影存储在投影机或 Zoom(变焦) 打开 Zoom(变焦)对话框以 View 内存卡上的文件,而无需连接计算机。 放大或缩小显示。 (观看) 将所显示的视窗分割为多个窗...
  • Seite 276 从投影机操作 关于 Document Viewer(文档浏览器)视窗 投影 Excel 或 Word 文件 使用存储在连接于局域网的计算机中的文件 按第 22(CS)页“进行演示-使用存储在连接 于局域网的计算机中的文件”中步骤 1 和 2 的 操作。 选择包含您要在投影机上投影的 Excel 或 Word 文件的文件夹,然后双击该文件。 如果所选的计算机设置了口令,请输入口令。 选择 Excel 文件时,Worksheet Viewer(工作 表浏览器)启动并将所选文件的工作表投影到投 影机上;选择 Word 文件时,Document Viewer (文档浏览器)启动并投影文件的首页。 1 菜单栏 使用存储在投影机或内存卡上的文件 菜单 命令 功能 File Open(打开)...
  • Seite 277: 使用 Image Viewer(图像浏览器) 进行幻灯片播放

    (Full screen(全屏显示))键 使用 Image Viewer(图像浏览器) 显示所选择幻灯片的全屏显示视窗。 进行幻灯片播放 7 菜单栏 可以显示存储在投影机或内存卡(安装在投影 菜单 命令 功能 机上)中的文件略图,然后选择所要的图像进行幻 File(文件) About(关于) 表示程序上的版本画像信 灯片播放。 息。 启动投影机的 Image Viewer 并选择含有所要 Close(关闭) 关闭当前所显示的文件。 View Full Screen 显示所选择图像的全屏显示 文件的文件夹时,主视窗打开。 (观看) (全屏显示) 视窗。 Information 打开所选择图像的画像信息 (画像信息) 对话框。 关于 Image Viewer(图像浏览器)的主视窗 Sort Slides 按指定的顺序将文件夹中的...
  • Seite 278 从投影机操作 出现 Slide Show Setting(设置播放)对话框。 显示全屏显示图像 可以从主视窗显示所选择略图的全屏显示图 像。 在 Network Projector(网络投影机)视窗中双 击 Image Viewer(图像浏览器)。 Image Viewer 启动。 改变设置并单击 OK 或 Save(保存)键。 从文件夹对话框选择包含所要显示图像文件的文 件夹。可以在存储在投影机或安装在投影机内存 注 卡中的文件夹中选择。 投影如 UXGA 格式中的大尺寸图像文件时,因 主视窗打开,显示所选择文件夹中所包含的幻灯 为内存不够无法打开或旋转。遇到这样的情况, 片略图。 请缩小图像以获得更小的文件尺寸。 单击幻灯片略图选择所要显示的幻灯片。 从 Slide Show(幻灯片播放)菜单中单击 View 绿色框出现在所选择的幻灯片上。 Show(观看演示),或在工具栏中单击 键。 右单击幻灯片以选择...
  • Seite 279: 连接至因特网

    保存后要改变设置 连接至因特网 从 Slide Show(幻灯片播放)菜单中单击 Slide 双击 Network Projector(网络投影机)视窗中 Show Setting(设置播放)。 的 Internet Browser(因特网浏览器)图标。 Slide Show Setting(设置播放)对话框打开。 出现 Internet Browser 视窗。 单击 Load(读入)。 单击任务栏上的软件键盘图标以显示屏幕键盘, Load Slide show setting file(读入设置播放文 然后输入所要网页的地址。 件)对话框打开。 使用遥控桌面功能 本投影机与 Windows XP Professional 的 Remote Desktop 特性兼容。该特性使投影机可在 相同的...
  • Seite 280: 从计算机操作

    准备工作 • 请勿同时从两台以上的计算机访问本投影机。 • 如果计算机浏览器设置为“A c c e s s t h e 开始之前 Internet using a proxy server(使用代理服 务器访问因特网)”,在从计算机访问投影机 x 用于 VPL-PX15 时,请在“Access the Internet without using 确认在安装设置项目单中将输入 B 功能设置为 a proxy server(不使用代理服务器访问因特 开。 网)”框中输入投影机的 IP 地址。 • 根据浏览器的版本,计算机可能会不接受投影...
  • Seite 281: 用 Slide Viewer(幻灯片浏览器)演示 Powerpoint 文件

    7 输入选择键 Application Select(应用选择)视窗的名称和 选择投影机的输入。 功能 VPL-PX15 视窗中没有 INPUT C 键。 访问投影机并打开 Application Select(应用 8 MORE...(更多)键 选择)视窗。下面显示出视窗中图标和按键的名称 打开投影机的控制视窗。 和功能。 注 • 根据网络结构,显示文件可能需要时间。 • 用于发送的一个文件的最大容量为 15 MB。 • 因 Slide Viewer(幻灯片浏览器)、Worksheet Viewer(工作表浏览器)和 Document Viewer (文档浏览器)分别为基本 PowerPoint、Excel 和 Word 功能,可能不支持其他软件的某些功能。 开始演示之前,最好将演示中所使用的文件投影到 投影机上。...
  • Seite 282 从计算机操作 要将所选的文件存储在投影机中 进行演示 单击选择“save in projector(存储在投影机 在 Application Select(应用选择)视窗单击 中)”复选框。若有必要,可以对该文件设置口 PRESENTATION VIEWER(演示文稿浏览 令。请在“password(口令)”文字框中指定 器)图标。 口令。这样只有输入口令才能打开文件。 出现 Look In(访问)视窗。 单击 Set Up(设置)或 View(观看)键时,文 单击选择从何处查找要用于演示的文件。 件将被存储。 COMPUTER(计算机)∶选择存储在计算机中 的文件 注 PROJECTOR(投影机)∶选择存储在投影机 用 File Manager(文件管理器)删除文件时, 中的文件 即使对该文件设置了口令,也不需要输入口令。 出现 File Select(文件选择)视窗。 选择要用于演示的文件。 在步骤 2 选择 PROJECTOR(投影机)时 出现文件一览表表示存储在投影机或内存卡中的...
  • Seite 283 注 如果单击 View(观看)或 Set Up(设置)键 时出现“Projector's memory is full(投影机的存 储器已满)”画像信息,请用 File Manager(文件 管理器)删除存储在投影机中的不需要的文件(第 37(CS)页),然后再重新进行幻灯片播放。如果 出现“File size is too large(文件尺寸太大)”画 像信息,请减小文件尺寸,然后再重新进行幻灯片 播放。 提示∶ 可以单击 Option(选项)使文件更小,然后从 T o o l s ( 工 具 ) 菜 单 S a v e ( 保 存 ) , 并 在 注...
  • Seite 284: 用 Worksheet Viewer(工作表浏览器)投影 Excel 文件或用 Document Viewer(文档浏览器) 投影 Word 文件

    从计算机操作 4 幻灯片 用 Worksheet Viewer(工作表浏览 表示在幻灯片播放中当前所显示的幻灯片。投 器)投影 Excel 文件或用 Document 影机屏幕上仅显示此幻灯片。 Viewer(文档浏览器)投影 Word 文件 5 b PREVIOUS(前一张)键 在幻灯片播放中返回到前面的幻灯片或动画设 可以操作计算机将 Excel 或 Word 文件投影到 置。 投影机上。 选择 Excel 文件时,Worksheet Viewer(工 6 幻灯片文字框 作表浏览器)启动,所选文件的 Worksheet(工作 单击 打开幻灯片名下拉一览表。从该一览表 表)被投影到投影机屏幕上。选择 Word文件时, 中选择指定的幻灯片时,它显示出来。 Document Viewer(文档浏览器)启动,所选文件 7 NEXT B(下一张)键...
  • Seite 285 例:Worksheet Viewer(工作表浏览器)视窗 键 选择所显示的工作表最右下侧的单元格。 2 Zoom(变焦)文字框 单击 打开下拉一览表以选择放大率或缩小 率。工作表被放大或缩小而现在所选单元格居中。 3 窗格文字框 当所显示的工作表被分割成多个窗格时,单击 打开下拉一览表以从 Top Left(左上)、 Top Right(右上)、Bottom Left(左下)和 Bottom Right(右下)中选择所需的窗格。 4 Sheet(表)文字框 单击 打开所显示的工作簿中的表名下拉一览 表。选择表名以显示所选择的表。 将鼠标指向各按键或项目时,其说明出现在视 窗底部。 键 选择工作表最左上侧的单元格。 注 6 File Name(文件名称) • 工作表在计算机上的显示区域范围和在投影机上的 显示现在所显示的文件名称。 投影区域不同。 • 在计算机上单击 Worksheet Viewer(工作浏览 7 Selected Cell(所选单元格)...
  • Seite 286: 使用 Image Viewer(图像浏览器)投影图像

    从计算机操作 8 END(结束)键 关于在 Document Viewer(文档浏览器)启动 结束或中止 Word 文件显示以返回到 File 时显示的视窗 Select(文件选择)视窗。 9 v HOME(复位)键 返回到 Application(应用)选择视窗。 键 显示下一页。 使用 Image Viewer(图像浏览器) 投影图像 可以投影存储在相同局域网中的任何计算机或 存储在投影机的存储器或安装于投影机的内存卡中 1 滚动键 的图像文件。也可用在投影机中预设的幻灯片设置 单击 或 键将所显示的页滚动到左侧或右 文件(.SHO 文件)进行幻灯片播放。 侧。 单击 或 键将所显示的页滚动到上侧或下 在投影机上投影存储在计算机中的图像 侧。 在 Application Select(应用选择)视窗中单击 键...
  • Seite 287 选择要显示的图像文件。 关于运行 Image Viewer(图像浏览器)过程中 单击 Browse(浏览)以打开计算机上的文件选 的视窗显示 择视窗。双击所要的文件。 所选择的文件名称显示在 Browse 文字框中。 单击 SHOW(播放)键。 所选择文件的全屏显示图像显示在投影机上。 注 投影大尺寸图像文件,如 UXGA 格式时,因为 内存不够无法打开。遇到这样的情况,请缩小图像 以获得更小的文件尺寸。 要节省转送数据的时间 单击 SHOW 键时,文件转送至投影机。在投影 机屏幕上显示一幅图像要花一些时间。若要立即显 1 File name(文件名称) 示,请在开始演示之前将要使用的所有文件转送至 表示当前显示图像的文件名称。 投影机。 2 Slide(幻灯片) 从“在投影机上投影存储在计算机中的图像”的 单击 SHOW 键或列于 Temporary File 中的 文件名称,显示投影机现在所投影的图像。...
  • Seite 288 从计算机操作 注 在步骤 4 中选择文件夹时 单击 END 或 HOME 键退出 Image Viewer 视 所选文件夹中所包含的图像文件列在右侧。 窗时,列在 Temporary File (临时文件)中的文 件将被自动清除。要保存文件时,请使用 F i l e Manager(文件管理器)功能将文件添加到投影机 上。 有关详细内容,请参阅第 37(CS)页上的“使用 File Manager(文件管理器)”。 用存储在投影机中的图像文件进行演示 单击 Application Select(应用选择)视窗中的 IMAGE VIEWER 图标。 Look In(访问)视窗出现。 END(结束)键 v HOME(复位)键 单击...
  • Seite 289: 使用 File Manager(文件管理器

    已用内存/内存容量 关于运行 Image Viewer(图像浏览器)过程中 的视窗显示 出现与第 35(CS)页“关于运行 Image Viewer(图像浏览器)过程中的视窗显示”中相 同的视窗。 .SHO 文件选择视窗中的 NEXT(后一幅)键 用于在幻灯片播放中立即进到下一张幻灯图像, PREVIOUS(前一幅)键用于回到前一幅幻灯图 像。 使用 File Manager(文件管理器) 单击 Add(添加)键。 所选的文件被存入投影机。 可以从计算机通过简单的操作管理存储在投影 机中的文件。File Manager 功能供您删除存储在投 用 File Manager(文件管理器)从投影机删除 影机中不需要的文件或将存储在计算机中的文件添 文件 加到投影机的存储器中。 用 File Manager 检查显示在 File Manager 视 在 Application Select(应用选择)视窗中单击 窗上的投影机当前所使用的内存和最大剩余内存。...
  • Seite 290: 从计算机控制投影机

    PICTURE CTRL(图像控制)视窗 从计算机控制投影机 可以在计算机显示屏上进行各种投影机的调整 和设置。有三种控制视窗∶GENERAL(一般)、 PICTURE CTRL(图像控制)和 SETTINGS(设 置)视窗,各视窗具有不同的功能。 视窗中的按键与投影机附带的遥控器上的按键 功能相同。 有关按键的详细说明,请参阅投影机的操作手册。 下列步骤中的插图用于 VPL-PX15。 (VPL-PX15) 单击 PJ CONTROL(投影机控制)处的 x 用于 VPL-PX15 COLOR TEMP(色温)(HIGH(高位), MORE...(更多)键。 LOW(低位))键功能与菜单中的设置相同。 出现 GENERAL(一般)视窗。 x 用于 VPL-FX51 DDE(动态数据交换)(OFF(关)、 单击功能标签选择所要的视窗。 PROGRESSIVE(逐行)、FILM(电影)) 和 RGB ENHANCER (增强)+/- 键功能 GENERAL(一般)视窗 与菜单中的设置相同。...
  • Seite 291: 维护功能

    有关指示灯的画像信息,请参阅操作手册。 机的 IP 地址)/info”。 使用电子邮件报告功能 如果未改变出厂预设的 IP 地址,则输入“http:/ / 192.168.0.1/info”(使用局域网时)。 电子邮件报告功能的作用 输入 Administrator(管理者)的姓名和口令。 出现 Information(画像信息)视窗。 • 定期报告投影机的安装状态、用户信息等。您可以 指定邮件的发送日期〔Regular Report(定期报 以下插图用于 VPL-PX15。 告)〕。 • 如果投影机出错,可迅速报告〔Error Report(出 错报告)〕。 • 当到投影灯的预设使用期限时,可发送一个警告邮 件〔Lamp Reminder(投影灯提醒器)〕。 • 当到投影机的预设保养时间时,可发送一个警告邮 件〔Maintenance Reminder(保养提醒器)〕。 1 Projector Status(投影机状态) 表示投影机的当前状态。 2 Projector(投影机)...
  • Seite 292 维护功能 单击 Server(服务器)标记。 电子邮件报告功能的设置-从投影机操作时 邮件服务器设置视窗打开。 要使用电子邮件报告功能时,设置发送邮件的 地点和时间的邮件地址和日期,并设置要使用的邮 件功能。 从 Start(开始)菜单选择 Control Panel(控 制面板),然后再选择 e-Mail Report(电子邮 件报告)。 e-Mail(电子邮件)视窗打开。 单击 Mail(邮件)标记。 以下视窗打开。 设置所分派的邮件地址和邮件服务器的 SMTP。 有关详情,请参阅 e-Mail Report Help(电子邮件报 告帮助)。 当所有设置完成时,单击 OK 键。 要发送测试邮件时 可能发送一个测试邮件以确认该邮件是否被发 往指定的地址。单击 Test Mail(测试邮件)键。 设置邮件要送达的地址。在 TO: 和 CC: 文字框 关于电子邮件报告的...
  • Seite 293 Mon/Tue/Wed/Thu/Fri/Sat/Sun(星期一/二/三 电子邮件报告功能的设置-从计算机操作时 /四/五/六/日):指定该周的某些日子。您 可以选择两天以上。 要使用电子邮件报告功能时,需设置发送邮件 Every Month on Day(每月某日):选择此确认 的地点和时间的邮件地址和日期,并设置要使用的 框并从下拉一览表选择日子便可在每月指定的日 邮件功能。 子发送邮件。 定期报告含以下内容: 在计算机上显示 Setup(设置)视窗。 Product Information(产品画像信息):机型名 关于显示 Setup 视窗的方法,请参阅第 14(CS)页 称,序号,版本画像信息 上的“打开设置视窗”一节。 User Information(用户信息):用户名称,公司 名称,投影机的安装位置 单击 Setup 视窗中的 e-Mail Report(电子邮件 Information(画像信息):使用投影灯的时间、投 影灯模式等 报告)图标。e-Mail Report(电子邮件报告) Memo(备忘录) 功能的设置视窗打开。 参见下述说明以了解设置各项目的方法。 3 APPLY(适用)键 所有项目的设置完成后单击此键。...
  • Seite 294 维护功能 6 APPLY(适用)键 设置邮件服务器-从计算机操作时 在邮件服务器设置完成时或发送测试邮件时单 邮件设置完成后,单击 NEXT(下一个)键。 击此键。 邮件服务器设置视窗打开。 注 如果未设置或未正确设置以下项目,则会出现 出错画像信息并无法发送测试邮件。 • TO: 邮件设置视窗中的文字框 • 邮件服务器视窗中的 Mail Address(邮件地址) • SMTP 1 Mail Address(邮件地址) 输入所分派的邮件地址。最多可输入 128 个字 符。 2 SMTP 输入邮件服务器的地址。最多可输入 128 个字 符。 3 Mail Form(邮件形式) 请从 Standard 或 Simple 中选择邮件形式。当 选定...
  • Seite 295: 故障排除

    将线路入口的频道设置为 1 至 11。 • 经上述检查后无线局域网 PC 卡、内存卡或线路入口仍操作异常。 t 请与所使用的卡或线路入口的制造商联系。使用指定的 Sony 无线局域网 PC 卡时,请 与有资格的 Sony 专业人员联系。 计算机不能访问投影机。 • 安装设置项目单中的输入 B 功能(VPL-PX15)或输入 C 功能(VPL-FX51)设置不正 确。 t 将其设置为开。 • 计算机的浏览器被设置为“Access the Internet using a proxy server(使用代理服务器访 问互联网)”。 t 请在“Access the Internet without using a proxy server(不使用代理服务器访问互...
  • Seite 296 Real Player 的主页。投影机的互联网主页与 Java 格式不兼容。 其他 症状 原因和对策 自动投影机搜索和遥控桌面功能不起作用。 • 所连接的计算机未进行必要的设置。 t 在计算机上对相应的功能进行必要的设置(第 27(CS)或 28(CS)页)。 投影机屏幕被固定。 投影机的软件冻结。 t 将安装设置项目单中的输入 B 功能(VPL-PX15)、输入 C 功能(VPL-FX51)设 置为关,然后将其重新设置为开。 出现“Password is set for the file. Enter 在文件的文本中,使用了 Slide Viewer(幻灯片浏览器)、Worksheet Viewer password.”(该文件设置了口令。请输入口 投影机或文件设置了口令。 令。)画像信息。 t 输入口令。IP 地址的出厂预设值未改变时,在 Administrator(管理者)的 Name(姓 名)文字框中输入“root”。...

Diese Anleitung auch für:

Vpl-fx51

Inhaltsverzeichnis