Operations From The Projector - Sony VPL-PX15 Bedienungsanleitung

Operations from the Projector

2 (Slide View) button
Shows a slide.
3 (Note View) button
Shows a slide and speaker's note.
(Slide Show) button
4
Runs a slide show.
5 Slide transition buttons
Click the button to display the previous slide.
Click the button to display the next slide.
6 Slide list box
Click to open the drop-down list and select the
number of the slide you want to display.
7 (Help) button
Click to display the Help topic for the Slide Viewer.
8 File name
The name of a file is displayed.
Running a presentation
Using a file stored in a computer connected to
the LAN
1
Double-click the My Projector icon in the Network
Projector window.
2
Enter "\\ xxxx (name of a computer you want to
access)" in the address column, then click the
Enter button.
The shared folders for the computer are displayed.
Note
You have to set the items for Identification in the
Network Configuration dialog box (page 10 (GB)),
and have to set share files with a computer you
want to access.
3
Select the folder which contains the PowerPoint
file (.ppt or .pps file) you want to run a
presentation, then double-click that file.
If the password is set for the selected computer,
enter the password.
The Slide Viewer starts.
36
(GB)
4
When you want to set up the slide show, click Set
Up Show from the View Show menu.
The Set Up Show dialog box opens.
For details, see Help for Slide Viewer.
5
Click Run from the View Show menu to run the
slide show.
Using a file stored in the projector or in the
memory card
1
Double-click the Presentation Viewer icon in the
Network Projector window.
The Presentation Viewer starts, and the Open File
dialog box appears.
2
Select the PowerPoint file you want, and click the
OK button.
The Slide Viewer starts, and the selected file
appears in slide view.
3
Perform steps 4 and 5 in "Using a file stored in a
computer connected to the LAN."
Switching the slide view mode
Slide Viewer has three view modes; Slide Show, Slide
View and Note View, each of which gives you a
different way of showing a slide. Display a view by
clicking its corresponding command from the View
menu. Clicking its button on the tool bar also switches
the view.
About Help for the Slide Viewer
For details on operations with the Slide Viewer, see
Help. Clicking the button on the tool bar opens the
Help topic.