Conceptronic CADSLR4+ Schnellinstallationsanleitung Seite 36

ENGLISH
You will see the "Port Forwarding" Setup page:
6. Select the LAN IP for the computer that needs the Port Forwarding Rule. If the IP is
not in the list (for example: if the device uses a Static IP) you can use the "New
IP" Button to add the device IP.
7. Select the Category for your Port Forwarding Rule.
Note: There are several ports pre-defined in the configuration. You can select 1 of
the pre-defined ports or create a new rule by selecting the "User" Category
and press the "New" button.
8. Select the Rule you need for your Forwarding.
9. Press the "Add" button to attach the selected Rule to the selected IP Address.
10. If all Rules are defined, press "Apply" to save the settings.
11. Click "Save & Reboot" to enter the Save & Reboot screen.
12
12. Click "Save & Reboot" to restart the CADSLR4(B)+ and activate the rules.
6
7
The defined Rules are now ready to use!
8
36
9
10