Conceptronic CADSLR4+ Schnellinstallationsanleitung Seite 26

ENGLISH
If above steps don't solve the IP address problem, you can reset the device to the
factory default settings with the Reset Button on the back panel.
Press and hold the Reset Button for +/- 10 seconds to load the Factory Default Settings.
When the LAN LED's turn off and on again the CADSLR4(B)+ reloads the Factory Default
Settings. Wait for +/- 10 seconds and repeat step C to renew your IP address.
5. Configure the CADSLR4(B)+ for your ADSL Connection
The configuration of your CADSLR4(B)+ is web based. You will need a web browser for
the configuration of the device.
Note: The factory default configuration of the CADSLR4(B)+ is:
IP Address : 192.168.1.1 (DHCP for connected clients Enabled)
Username : admin (small characters)
Password : admin (small characters)
26
C
C