Ottobock C-Leg 3C98-2 Information Für Träger Seite 27

Both LEDs are off.
No power supply
(or defective charger)
Yellow LED flashes.
Green LED is lit.
Battery is being charged.
Battery capacity is
above 50%.
Once the joint has been charged successfully, remove the 4E50-* charger.
4 Close plug cover.
Switching between 1st, 2nd and 3rd Mode
The C-Leg features a 1st, 2nd and 3rd mode: The 1st mode (optionally with standing mode) is for everyday
use, the 2nd and 3rd modes can be used to preprogram specific movement patterns or postures individually,
such as riding a bicycle (only available in the 2nd mode), inline skating, or cross-country skiing.
Switching between modes can be done with the remote control or through specific movement patterns in the
joint. The 2nd and 3rd modes can also be defined and modified by your prosthetist using the 4X180=* C-Soft
Adjustment Software (V2.4 and higher).
Switching between modes can be done with the remote control or through specific movement patterns in the joint.
CAUTION
Improper use of the remote control. When using the remote control, the functionality of the joint changes.
In certain situations, this can cause you to fall.
When using the remote control, you must always stand securely. Then carefully try, whether the desired
function has been activated.
CAUTION
Manipulation on the remote control. Any changes or modifications you make to the remote control on your
own initiative can lead to malfunction and result in unexpected actions of the joint. This can cause you to fall.
Any changes or modifications to the device may limit its use.
C‑Leg
Both LEDs are lit.
Battery is being charged.
Battery capacity is
lower than 50%.
Yellow LED is off.
Green LED is lit.
Battery is fully charged
(or connection with C-Leg
is interrupted).
Ottobock | 27