Grille And Drip Basin; Discharge Basin - Faema SMART Gebrauch Und Installation

STEAM NOZZLES AND HOT-WATER DISPENSING PIPES -
Using a clean sponge, wash with hot water removing any
organic residue present. Rinse carefully.
Do not use abrasive products.
To clean the inside of the steam nozzles, follow these steps:
Turn the nozzle towards the cup tray and carefully activate
steam dispensing at least once.
NOTE: the procedures described below can also be carried out when the machine is switched off.

GRILLE AND DRIP BASIN -

1
Remove the grille from the
basin.

DISCHARGE BASIN

- T
Pour about a liter of hot water into the discharge basin to
remove any discharge residues.
BODYWORK -
Use a soft cloth and cleaning products WITHOUT ammonia
or abrasives, removing any organic residue present in the
work area.
NOTE. Do not spray liquids into the panel slots.
2
Extract the basin.
15 EN
3
Rinse the grid and tray
under running water.