Daily Switch-On; Cup Warmer (If Provided); Heating Phase; Use - Faema SMART Gebrauch Und Installation

USE

10. Daily Switch-On

"Before setting the machine to work, make sure that:
• the main electric power switch is on;
• the mains water tap has been turned on".
Turn the master switch (1) to position 1.
If the water level in the boiler is less than the minimum
Turn the master switch (1) to position 2.
"Heating" now begins.
At the end of the day, turn the machine OFF by turning the
main ON/OFF switch (1) to position 0.

11. Cup Warmer (if provided)

12. Heating phase

During heating, if one of the coffee dispensing push
buttons is pressed, the machine dispenses a coffee at the
temperature reached at the time.
Heating is completed when the boiler gauge indicator (14)
remains stable in the green area.
The machine is now ready to dispense coffee, steam and
hot water.
(10) are at similar temperatures, press the coffee dispensing
push button (21) and let the machine dispense coffee for
a few seconds. Then press the STOP push button (18) to
stop dispensing.
11
The machines have a cup tray (11) for stocking the cups.
Only place cups and glasses used with the coffee machine
on the cup tray. No other objects must be placed on
the tray.
Thoroughly drain the cups before placing them on the tray.
Press the button (12) and check to see that the light turns on.
12
11 EN
1
CAUTION: do not cover the cup warmer tray
with any type of cloth.
14
21
18
10