Setting The Date And Clock; Setting The On-Board Lan - Sony VPL-PX15 Bedienungsanleitung

Setting Up the Projector

Setting the Date and Clock

The clock is displayed on the task bar of the Network
Projector window. To set the date and time, follow the
steps below.
1
From the Start menu, click Control Panel in the
Network Projector window.
2
Double-click the Date/Time icon.
3
Set the date and time.

Setting the On-board LAN

Setting up the network configuration, such as IP
address setting, is necessary for building a LAN
connection. The IP address of the projector will be
displayed on the task bar of the Network Projector
window of the projector.
If the connection environment is changed, you need to
set up the network configuration again.
1
From the Start menu, click Control Panel in the
Network Projector window.
2
Double-click the Network Connections icon.
The window appears and the available network
icons are displayed.
3
Double-click the On-board LAN icon.
The On-board LAN settings dialog box appears.
4
Confirm that the "Specify an IP address" radio
button is selected, and set the necessary items.
The IP Address is initially set to "192.168.0.1,"
and the Subnet Mask is set to "255.255.0.0" at the
factory.
10
(GB)
5
Click the Name Servers tab to display the Name
Servers dialog box, then set the necessary items.
6
Click the OK button.
The window in step 2 reappears.
When you use a wireless LAN PC card
Follow the steps below.
1
Click the right button of the mouse on the On-board
LAN icon.
2
Click "Disable".
When you want to use On-board LAN, click "Enable".
Setting priority of On-board LAN and wireless
LAN
When priority is set, the connection is automatically
selected according to priority and you do not need to
set "Enable"/"Disable". The second connection is
selected when the first connection is disconnected.
1
Click Advanced on the menu bar.
The Advanced setting window appears.
2
Set priority in the Advanced Adaptor Settings
window.