Sony VPL-PX15 Bedienungsanleitung Seite 84

Maintenance Function
Setting the mail server — when operating
from a computer
After the mail setting is complete, click the NEXT
button.
The mail server setting window opens.
2 1
4
3 5
1 Mail Address
Type the allocated mail address. You can enter up to
128 characters.
2 SMTP
Type the address of the mail server. You can enter up
to 128 characters.
3 Mail Form
Selects the mail form from Standard or Simple. When
Simple is selected, the mail with a simple message is
sent in the following cases:
– an error occurs.
– a preset used time of the projector lamp has been
reached.
4 BACK button
Closes this window and opens the mail setting
window.
5 Test Mail
Sends mail as a test to confirm whether it is sent to the
specified addresses. Select the Send check box, then
click the APPLY button.
42
(GB)
6
6 APPLY button
Click this button when the mail server setting is
complete or when you send a test mail.
Note
If the following items have not been set or are
incorrectly set, the error message appears and the test
mail is disabled:
• TO: text box in the mail setting window
• Mail Address in the mail server window
• SMTP