Sony VPL-PX15 Bedienungsanleitung Seite 82

Maintenance Function
Setting for e-Mail Report function  when
operating from the projector
To use the e-Mail Report function, set the mail
addresses and date to where and when mail is to be
sent, and which mail functions you are using.
1
From the Start menu, select Control Panel, then
select e-Mail Report.
The e-Mail setting window opens.
2
Click the Mail tab.
The following window opens.
3
Set the addresses where mail is to be sent.
Enter mail addresses in the TO: and CC: text
boxes. The same mail can be sent to three different
addresses at the same time.
4
Set the time and day when mail is to be sent, and
the mail function you are using (Error Report,
Lamp Reminder and/or Maintenance Reminder).
5
Click the Server tab.
40
(GB)
The mail server setting window opens.
6
Set the allocated mail address, and SMTP of the
mail server.
For details, refer to the e-Mail Report Help.
7
When all the settings are complete, click the OK
button.
To send test mail
You can send mail as a test to confirm whether it is
sent to the specified addresses. Click the Test Mail
button.
About Help for e-Mail Report
For details on operation with e-Mail Report function,
see Help. Clicking the
the Help topic.
button on the tool bar opens