Technical Specifications - Chicco Essential Digital Audio Baby Monitor Gebrauchsanleitung

- Do not keep charging the lithium battery when
not in use.
- Keep the instructions manual for future
reference.
- Always remove the Lithium battery from the
product when not in use.
- Dispose of properly according to the information
in this manual.
3.1 Installing or raplacing Alkaline batteries not
included in the child unit
Remove the battery compartment closing panel
(8), placing your finger near the top groove and
and gently pulling the panel outward (fig.1).
Remove the flat batteries, if present, and insert
two new 1.5 V Alkaline AAA/L03 batteries,
respecting the proper insertion polarity as
indicated in the battery compartment.
Reposition the battery compartment closing
panel (8), first inserting the lower panel hooks in
their battery compartment housing and gently
pushing the panel toward the product (fig. 2).
3.2 Installing and replacing the lithium-ion
battery supplied with the parent unit
Upon purchase, the 3.7V 800mAh rechargeable
lithium-ion battery (13) in the parent unit is kept
separately in the product packaging.
Carefully remove the lithium-ion battery from
its packaging.
Remove the rechargeable battery compartment
closing panel (9), placing your finger near the top
groove and and gently pulling the panel outward
(fig.3).
Insert the lithium-ion battery (13), respecting
the proper insertion polarity as indicated in the
battery compartment.
Reposition the battery compartment closing
panel (9), first inserting the lower panel hooks in
their battery compartment housing and gently
pushing the panel toward the product (fig.4).
If the duration of the rechargeable lithium-ion
battery is reduced excessively, this means that it
has run out and therefore must be replaced (this
is to be considered normal because rechargeable
batteries run out over time).
Remove the run out rechargeable battery (13) and
replace with another rechargeable battery that is
identical to the 3.7V 800mAh supplied with the
product (code 20256400100 to be requested
directly from Artsana S.p.A.) taking care to place
them with the correct insertion polarity indicated
on the battery compartment.

TECHNICAL SPECIFICATIONS

- Voice transmission via FHSS digital technology
system.
- Outdoor operating range of 200 metres without
obstacles*.
- Easy to use user interface.
*The maximum operating range is about 200
metres in an open field with no obstacles
and with fully charged batteries (the range,
however, could be reduced substantially within
a home, depending on particular environmental
conditions, layout of walls and furniture
in the home and the presence of metallic
structures, external and internal interference/
electromagnetic fields, concrete walls or between
rooms on different floors or because batteries are
not fully charged, etc.).
Child unit
Power:
Internal: TWO
BATTERIES
External: via 100-240V~ 50/60Hz /6V
500mA mains switching adapter
Transmission:
- Transmission frequency band: 2400-2454 MHz
- Signal strength: 100mW max
Parent unit
Power:
Internal: 3.7V 800mAh LITHIUM-ION BATTERY
External: via 100-240V~ 50/60Hz /6V
500mA mains switching adapter
Lithium-ion battery charging via 100-240V ~
50/60Hz /6V
adapter
Reception:
- Transmission frequency band: 2400-2454 MHz
- Signal strength: 100mW max
Mains adapter
Mod. S003IV0600050
INPUT: 100-240V ~ 50/60Hz 150mA
OUTPUT: 6V
Plug polarity:
Made in China
Lithium-ion battery
Mod. MB1022 (ICP46/34/46)
Nominal capacity: 800mAh (2.96Wh)
Nominal voltage: 3.7V
Lithium batteries give best performance when
used at normal room temperature (20°C±5°C)
Made in China
18
1.5V AAA/LR03 ALKALINE
500mA mains switching
500mA