Chicco Essential Digital Audio Baby Monitor Gebrauchsanleitung Seite 15

transmission selector
9. Rechargeable lithium-ion battery compartment
closing panel.
10. Belt hook
11. Holes for support cord (not included)
12. Power connector and/or rechargeable lithium-
ion battery charger
13. 3.7V 800mAh rechargeable lithium-ion
battery via 100-240V ~ 50/60Hz /6V
500mA mains switching adapter
2. Description of features
2.1 Child unit :
2.1.1 Power:
When power is supplied with mains adapter (1):
- insert the mains adapter jack (1) in the power
connector (9) on the side of the unit.
- insert the mains adapter plug in an easily
accessible power socket.
Warnings
- Periodically inspect mains adapters (1). If
the power cord or plastic parts show signs of
damage, do not use them and contact a qualified
technician.
- Do not leave mains adapters (1) plugged into
the outlet when devices are not in use and/or not
connected to the mains adapters (1).
2.1.2 Modes of use - Switching on and
Adjustment
The child unit must be positioned about 1 - 1.5
metres from the child, on a flat, stable surface
and with the microphone (7) directed toward
the child.
Attention: the transmitter, mains adapter and its
power cord must be kept out of reach of children.
- Child unit On/Off button (2).
Press this button for about 3 seconds and the
child unit will switch on. Do not press for too long,
otherwise the child unit may not switch on. Press
this button (2) again for about 3 seconds and the
child unit will switch off.
- Night light On/Off button (4)
Press this button for about 3 seconds and
the nightlight (3) will switch on steady and at
minimum intensity.
Do not press for too long, otherwise the nightlight
(3) may not switch on.
If during this operating mode, you press the
nightlight On/Off button (4) once, the "Variable
brightness nightlight" mode will be activated.
Brightness will automatically vary from maximum
level to minimum level.
At the twelfth minute, nightlight brightness will
remain fixed at minimum level.
During the "Variable brightness nightlight"
operating mode, if the nightlight On/Off button
(4) is pressed once, light brightness will return
steady at minimum level.
If the nightlight On/Off button (4) is pressed
again in this operating mode, the brightness
variation cycle will begin again, starting from
maximum level.
Press the nightlight On/Off button (4) button
again for 3 seconds and the nightlight will switch
off, both in minimum, steady brightness and in
"Variable brightness nightlight" mode.
For energy savings, when the child unit is being
powered via Alkaline batteries, the nightlight, if
in minimum intensity and steady mode, switches
off automatically 5 minutes after the end of the
'Variable brightness nightlight" operating mode
cycle.
If the child unit is being powered via mains
adapter (1), the nightlight will remain on in both
modes until the button (4) is pressed again for 3
seconds.
The nightlight can be switched on even when the
child unit is off.
2.2 Parent unit
The charging of rechargeable batteries should
only be done via the supplied mains adapter (1)
and can be performed both if the parent unit is
switched on and if the parent unit is off.
In the event of power with mains adapter (1) or
rechargeable lithium-ion battery charging:
- insert the mains adapter jack (1) in the power
connector (12) on the side of the unit.
- insert the mains adapter plug in an easily
accessible power socket.
Warnings
- Periodically inspect mains adapters (1). If
the power cord or plastic parts show signs of
damage, do not use them and contact a qualified
technician.
- Do not leave mains adapters (1) plugged into
the outlet when devices are not in use and/or not
connected to the mains adapters (1)
2.2.2 Modes of use - Switching on and
Adjustment
- Parent unit On/Off button (2).
Press this button (2) for about 3 seconds and the
parent unit will switch on. Do not press for too
15