Operation - Silvercrest SGB 1200 E1 Bedienungs- Und Sicherheitshinweise

m DANGER! Risk of electric
shock! Do not immerse the
product in water or other liquids .
Never hold the product under
running water .
m DANGER! Risk of electric
shock! Never use a damaged
product . Disconnect the product
from the power supply and
contact your retailer if it is
damaged .
The product is not to be used if
¾
it has been dropped, if there are
visible signs of damage .
Before connecting the product
¾
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Regularly check the power plug
¾
and the power cord for damages .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard .
Protect the power cord against
¾
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and open
flames .

Operation

m DANGER! Risk of burns!
During use the product gets hot .
Do not touch the product while in
use nor immediately after use .
Do not place the product on hot
¾
plates (gas, electric, coal cooking
range etc .) .
Operate the product on a level,
stable, clean, heat-resistant and
dry surface .
Do not cover the product while it
¾
is in use or shortly after use, when
it is still warm .
The use of extension cords is not
¾
recommended . If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A .
GB 9