Switching Off And Transportation; Switching Off; Transporting; Operation - Silvercrest SGB 1380 B2 Bedienungsanleitung

Before using the appliance for the first time, it
and all of the accessories must be cleaned free
of possible packaging residues. Clean the ac-
cessories with a handwarm and mild detergent
solution and then dry them ab.
Wipe the appliance housing with a cloth lightly
moistened with water and then dry it carefully.
When the appliance is completely dry inside
and out, insert the plug into a suitable power
socket (220 - 240 V ~ /50 Hz).
Now switch the appliance on, without the ac-
cessories and without foodstuffs. Leave the ap-
pliance door completely open.
Select the setting 230° C with the temperature
regulator 2 . Place the function switch
upper and lower heat.
Place the time switch 5
The appliance allows itself to be switched on
with the time switch 5
switch 5 is set the control lamp
As the heating elements are lightly greased, a
slight smell may occur when first putting them
into operation. This is harmless and stops after
a short time. Open a window and provide for
sufficient ventilation.
When the appliance has switched itself off auto-
matically, place the function switch
Remove the plug from the power socket and wait
until the appliance has cooled itself down.
Then clean the grill and baking area with a
cloth lightly moistened with water and then
dry it carefully.
3 to
at 15 minutes.
. As soon as the time
1 glows.
3 to OFF .

Switching off and transportation

Switching off

Place the function switch
at OFF. Unplug the power plug from the socket.

Transporting

If you wish to transport the appliance, first allow
it to cool down.
Remove the plug from the power socket.
Wrap the power cable around the retaining
hooks on the rear of the appliance.

Operation

Grilling and baking

Remove the roasting grill
from the appliance. If required, cover these
with baking paper resp. smear the baking tray
8 with butter or oil.
Allow the appliance to heat up for ca. 10 minutes
(dependant on the setting) to the required tem-
perature:
- Select the required temperature with the tem-
perature regulator
For grilling, you must always select the highest
temperature setting (230° C).
- Then, select with the function switch
upper heat (e.g. for toppings), lower heat
(e.g. for cakes) or upper and lower heat (e.g.
for Pizza). If you want to grill, always select
the setting upper heat with the function switch
- With the time switch
(ca. 10 minutes).
- Close the glass door
When the warm-up period is finished, place
the foodstuffs on the roasting grill
baking tray 8
ners. Ensure that there is sufficient space between
the foodstuffs and the inner walls/heating ele-
ments of the appliance.
- 43 -
3 and the time switch
7 and baking tray
2 .
5 set the pre-heat time
6 .
7 resp. the
and slide it in on one of the run-
5
8
3 either
3 .