Program Variants - Gram SF 930 Bedienungsanweisung

Program variants

The cabinet offers the following program possibilities:
1: Storage program.
2: Time-controlled freezing down.
3: Temperature-controlled freezing down.
4: Combination of time and temperature-controlled freezing down.
When either time control, temperature control, or a combination of both is selected,
each program is followed by a defrost and then changeover to the storage program.
The storage program can be used alone.
1. Storage program.
If this program is selected, the cabinet operates as a normal freezer and is controlled
by the set temperature.
2. Time-controlled freezing down.
The compressor runs continuously until the set time has elapsed. The control then
changes over to the storage program.
3. Temperature-controlled freezing down.
The compressor runs continuously until the set temperature is reached. The control
then changes over to the storage program.
4. Combination of time and temperature-controlled freezing down.
Combined time and temperature control operates as follows:
1. If the set temperature is reached before the set time has elapsed, this
temperature is maintained until the time has elapsed. The control then
changes over to the storage program.
2. If the set temperature is not reached before the set time elapses, freezing
down
changes over to the storage program.
76-504-0970
continues until the set temperature is reached. The control then
16/GB