Spare And Wearing Parts; Temporary Decommissioning - OMCN Gebrauch und wartung Betriebsanleitung

6.2.5 Lubricating oil flux calibration
1. Unscrew the cap of the tank on the oil atomizer.
2. Act on the screw indicated by the arrow using
a screwdriver and adjust it, in order to have the
emission of 1 oil drop every 3 opening/closing
movements of the bead breaker.
6.3

Spare and wearing parts

Denomination
Mounting tool adhesive tag
Electrical tensionadhesive tag
Bead breaker adhesive tag
Tilting column adhesive tag
Lanes protection
Bead breaker blade screw
Mounting tool
Protection tab
Mounting tool cover
Sliding cover tablet
Bead breaker blade
OMCN spa
7.
7.1
Procedure:
1. Disconnect electrical connection.
2. Disconnect pneumatic connection.
3. Dismantle the column switch and lean it at the side.
4. Follow what shown for first start up (see chap. 4.2).
5. Fix again the GRIP F 20 with its 3 screws on the
pallet (see chap. 4.2).
i
In case of sale or transfer of GRIP F 20, all the
documents included in the consignment volume
has to be integrally handed over together with the
equipment.
7.2
If the GRIP F 20 is going to be stopped for a limited
period of time or if the equipment is not being used
for other reasons, always disconnect the network plug
from its socket!
It is suggested to clean accurately the GRIP F 20, also
its tools and accessories, and carry out a protection
treatment (e.g. spraying of a thin oil film).
Order code
1 695 100 982
1 695 100 789
1 695 100 983
1 695 100 776
1 695 101 402
1 695 103 347
1 695 102 647
1 695 101 608
1 695 102 725
1 695 100 815
1 695 100 897
Decommissioning | GRIP F 20 | 37
Decommissioning
Place change

Temporary decommissioning

1 695 108 479
en
|
2016-09-26