Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
30 | GRIP F 20 | Initial commissioning
4.4
Electrical connection
1. Check the correspondence of the mains tension and
the tension shown on the identification tag.
2. Ask a qualified electrician to mount a connection
plug for single-phase or (depending on the tension
you have ordered ) three-phase current (see the
electrical connections diagram inside the electrical
panel).
i
The costs of arranging a mains protection device for
the plug are borne by the customer.
3. Protect the GRIP F 20 according to specific national
rules.
|
1 695 108 479
2016-09-26
4.5
Check rotation direction
!
For a correct functioning of GRIP F 20 it is extremely
important that, when the locking flange pedal shown
in Fig. 2 (1) is pressed, the locking flange (Fig. 2)
rotates clockwise.
1
Fig. 2:
Check rotation direction.
OMCN spa
Werbung
Inhaltsverzeichnis
