OMCN Gebrauch und wartung Betriebsanleitung Seite 34

en 34 | GRIP F 20 | Operating instructions
i
In case of RFT or UPH tires, in order to hold the
bead inside the semi drop centre, the use of
accessories like clamps, wedges or of the IRON ARM
bead breaker is suggested.
6. Press the tilting column pedal to tilt the column
backwards.
7. Press the locking jaw pedal to release the rim.
|
1 695 108 479 2016-09-26
5.3 Inflation
Inflation can generate potential danger
situations. The operator has to carry out the
necessary precautions in order to guarantee
operational safety.
!
Safety device:
To protect the operator from eventual dangers that
can occur during tire inflating on the locking plate,
the GRIP F 20 has been equipped with a valve that
limits operational pressure to 3,5 bar and of a
further valve limiting maximum pressure to 3,8 bar!
5.3.1 Inflation of tires with tube
1. Screw the valve element.
2. Connect the inflation gun to the tire valve.
3. Inflate the tire, by operating on the inflation gun
until reaching nominal pressure.
OMCN spa