Important Safety Instructions - Mitel 5550 IP Console Installationshandbuch

Important Safety Instructions

The AC power outlet shall be installed near the equipment and shall
be easily accessible by the user.
Attaching the Handset Cradle to the
Console Keypad
The handset cradle can be attached to either side of the console
keypad.
WARNING: Bending your wrist while using the keypad for prolonged
!
periods can cause physical injury. To minimize the risk of injury, adjust
the slope of the keypad so that your wrist is straight. Use the
adjustable foot provided to position the cradle at the same angle as
the attached keypad. The foot attaches to the keypad as shown in
Figure 2 (inset).
To attach the handset cradle to the console keypad:
1. Align the tabs on the U-clamp with the slots on the underside of
the console keypad.
2. Press to seat the tabs in the slots.
Figure 2 - Attaching the handset cradle to the Console Keypad
3. Attach the adjustable foot to the cradle (Figure 2, inset).
English 5