Mitel 5550 IP Console Installationshandbuch Seite 19

Configuring the 5550 IP Console for Remote
Operation
For details on how to configure the 5550 IP Console for
Remote/Teleworker Operation, refer to the 5550 IP Console Online
Help.
BLF Feature Programming Requirements
The BLF (Busy Lamp Field) feature requires the programming of one
or more virtual PKMs on the MCD. Each PKM has keys that can be
configured to provide the console with BLF information and DSS
(Direct Station Selection) functionality for up to 48 extensions. For
programming information, see "Attendant DSS/BLF Display" in the
MCD System Tool Help.
To enable the BLF feature (on Release 3.1 and later) after you have
installed the console:
1. Start the console.
2. Click Options in the tools menu, then select BLF Settings.
3. Select Enable Busy Lamp Field Feature.
4. Enter a directory location for the Shared and Private BLF lists
folders by selecting Browse beside the respective fields and
navigating to the correct location.
5. Click OK.
6. Exit the console, then restart.
NOTE: The Console BLF feature is supported on Resilient MCD
systems, except for failover.
Upgrading the 5550 IP Console software
To upgrade the 5550 IP Console software:
1. To preserve information on the console Scratch Pad, copy the
scratchpad.txt file in the following directory to another location:
• For Windows XP: \Mitel\5550 IP\config
• For Windows Vista and Windows 7:
2. Using Windows Administrative privileges, you can enter the
following for each Windows user and locate and backup the
scratch pad:
English
C:\Users\smith\AppData\Local\Mitel\5550 IP\config
11