Replacing The Battery - PeakTech 1650 Bedienungsanleitung

7. Replacing the battery

WARNING!
To avoid electrical shock, disconnect the test leads and any input
signals before replacing the battery. Replace only with same type
of battery.
This meter is powered by a NEDA type 1604 or equivalent 9 V-
battery. When the meter displays the battery symbol the battery
must be replaced to maintain proper operation. Use the following
procedure to replacing the battery.
1. Disconnect test leads from any live source, turn the rotary
switch to OFF and remove the test leads from the input
terminals.
2. The battery cover is secured to the bottom case by a screw.
Using a screwdriver, remove the screw from the battery cover
and remove the battery cover.
3. Remove the battery and replace with a new equivalent 9 V-
battery.
4. Replace the battery cover and reinstall the screw.
Note: Batteries which are used up, dispose duly. Used up
batteries are hazardous and must be given in the for this being
supposed collective container.
Statutory Notification about the Battery Regulations
The delivery of many devices includes batteries, which for
example serve to operate the remote control. There also could be
batteries or accumulators built into the device itself. In connection
with the sale of these batteries or accumulators, we are obliged
under the Battery Regulations to notify our customers of the
following:
-35-