Safety Guidelines - Opex Sure Sort Bedienungsanleitung

2.2. Safety Guidelines

This section provides safety guidelines to be observed when working with this
equipment.
Follow these safety guidelines whenever operating or maintaining the
equipment described in this manual.
Normal operations
with the normal working of the machine. Operator training is required, and
training is provided in
- Hands should be kept clear of the charging rails when the doors
Charging rail
are closed. Shorting of the charging rails with either a watch or ring may result
in electrical shock.
Do not remove the plastic, protective covers from the bottom of the iBOTs
The covers protect the iBOT's ultracapacitors and circuitry from damage. The
covers also protect the operator from harm if the ultracapacitors should leak.
For information on ultracapacitor safety, refer to
information" on page
Standing under an iBOT
load. No one may remain underneath iBOTS with loads.
Keep loose objects away from any exposed, moving parts of the machine
moving parts of the Sure Sort, such as the conveyor, can become jammed and/
or damaged by foreign objects. Keep hands, hair, loose clothing and jewelry
away from the moving parts.
Conveyor systems
(2.27 kg) or less. Do not sit, stand, or travel on any part of the conveyor system
while it is in motion.
Machine Entry -
Authorized service maintenance personnel should enter the aisle.
Machine design
without consulting OPEX or your authorized representative.
Safety
- Only authorized personnel shall start, operate, or interfere
"Operation" on page
60.
- Do not stand under an iBOT while it is carrying a
- The conveyor system is designed for items that are 5 lbs.
Do not enter the machine while it is in operation. Only
- Do not modify the design or configuration of the equipment
Sure Sort™ Operator Manual
OPEX Corporation
WARNING
111.
"Ultracapacitor product
-
- The
17