Replacing Components; Reminders For Replacing Components; Cleaning The Interior; Main Components - Bartscher Snack Serie Installations-, Gebrauchs- Und Wartungsanleitung

14 Power supply
adaptor fault
15 Empty pan

14 REPLACING COMPONENTS

REMINDERS FOR REPLACING COMPONENTS.

• Disconnect the appliance electric supply , if present, before
carrying out any operation.
• After replacing an electrical system component, check it is
correctly wired.
Replacing the hob inductor element/generator
• Remove the bottom of the appliance.
• Remove the component and disconnect it.
• Replace the faulty component.
Replacing the Wok inductor element/generator
• Remove the bottom of the appliance.
• Remove the component and disconnect it.
• Replace the faulty component.
Replacing the temperature regulator
• Remove the control panel.
• Replace the faulty component.
Replacing the glass ceramic hob
• In the event the glass ceramic hob is broken, contact our
company to have it replaced.

15 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.

16 MAIN COMPONENTS

• GLASS CERAMIC HOB

• Glass ceramic induction wok
• Indicator light
• Inductor elements
• Generator
• RFI f lter
Power supply vol- Check
tage too high or power supply
too low connection
Empty pan, de- Remove
fective sensor pan, switch off
the applian-
ce and let the
cooking zone
cool down be-
fore switching
on again. Di-
sconnect
generator and
reconnect
again after a
few minutes.
the
the
the
it
21