Identification; Product Description And Type Designation; Product Markings; Preparing The Product For Use - Videotec VERSO COMPACT Bedienungslanleitung

4 Identification
4.1 Product description and
type designation
Innovative and stylish housing, entirely built in
technopolymer, and designed to simplify installation
and servicing, the VERSO/VERSO COMPACT ensures
total protection against all environmental conditions.
Due to opening from its side, accessibility to the
camera, lens and all its connections is made far easier.
Entirely manufactured from the newest, most
resistant technopolymer, VERSO/VERSO COMPACT
guarantees high impact resistance, weather
protection from external agents and UV rays. Its
weatherproof features are ensured by the neoprene-
rubber gaskets and the cable glands or installed with
an internal cable management bracket and optional
sealing rings.
VERSO/VERSO COMPACT offers the possibility of
various mounting options: wall mounted bracket,
cable managed bracket, or on a Pan & Tilt head which
includes the ability to house most combinations of
cameras and lenses.
A specific version of VERSO with a very efficient
cooling system is available for installation with IP
cameras and for high environmental temperature.
VERSO POLAR is provided with a high performance
heating system which allows the working/
functioning even at the most severe temperatures.
A wide range of accessories is available, including
sunshield, heater kit, blower, camera power supply,
heater fan-assistant or alarm tamper switch (only
VERSO). The accessories are supplied factory installed
or as a simple upgrade kit.

4.2 Product markings

See the label attached to the outside of the package.
6
5 Preparing the product
for use
Any change that is not expressly approved
h g
by the manufacturer will invalidate the
guarantee.

5.1 Contents and unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
Check the contents to make sure they correspond
with the list of materials as below:
• Housing
• Housing equipment:
• Allen wrench
• Spacers
• Cable glands
• Screws and washers
• Screws for camera
• Instructions manual
5.2 Safely disposing of
packaging material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
Bear in mind that if the material has to be returned
due to a fault, using the original packaging for its
transport is strongly recommended.