Identification; Product Description And Type Designation; Product Markings; Preparing The Product For Use - Videotec Verso Hi-Poe Bedienungsanleitung

4 Identification
4.1 Product description and type
designation
The VERSO Hi-PoE camera housing assures easy plug
and play mounting, system reliability, economical
service and installation for the IP and Megapixel
cameras, thanks to the benefits of High Power PoE
(Power over Ethernet). This technology allows to feed
the 12Vdc cameras as well as the heater directly from
the Ethernet cable. No need to add external power
sources or bring additional power cables into the
enclosure.
If your network does not have Hi-PoE, you can add
it by using the 1 channel Power Injector (accessory
available as an option), in addition Videotec certifies
the compatibility of the Microsemi/PowerDsine HiPoE
Multi Port 7000 Midspans series (available in 6,12 and
24 port versions).
The VERSO Hi-PoE housing ensures total protection
against all environmental conditions. Due to its
side opening, the accessibility to the camera, lens
and all its connections is made far easier. Entirely
manufactured from the newest, most resistant
technopolymer, VERSO Hi-PoE guarantees high
impact resistance, weather protection from external
agents and UV rays. Its weatherproof features are
ensured by the neoprene-rubber gaskets and the
3 cable glands or installed with an internal cable
management bracket and optional sealing rings.
VERSO Hi-PoE offers the possibility of various
mounting options: wall mounted bracket, cable
managed bracket, or on a Pan & Tilt head. A specific
version with a very efficient cooling system is
available for installations with high environmental
temperature.

4.2 Product markings

See the label attached to the outside of the package.
4
5 Preparing the product
for use
Any change that is not expressly approved
h g
by the manufacturer will invalidate the
guarantee.

5.1 Contents and unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
Check the contents to make sure they correspond
with the list of materials as below:
• VERSO Hi-PoE housing
• RJ45 wiring
• Housing equipment:
• Allen wrench
• Spacers
• Cable glands
• Screws and washers
• Screws for camera
• Desiccant salt bag
• Instructions manual
5.2 Safely disposing of
packaging material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
Bear in mind that if the material has to be returned
due to a fault, using the original packaging for its
transport is strongly recommended.