Technical Speciications; Safety Information; Symbols In The Instructions; Symbols On The Equipment - Parkside PBS 2 A1 Originalbetriebsanleitung

13 Protective covers
Protect the operator from acciden-
tal contact with the cutting tool and
foreign bodies being thrown out.

Technical Speciications

Petrol grass trimmer ................ PBS 2 A1
Engine ............................ 2-stroke engine
Fuel Mix .........................................40:1
Engine capacity ........................42.7 cm³
Max. engine power ...... 1.35 kW (1.8 HP)
Engine tick over speed ...2700 - 3400 rpm
Max. cutting speed
With blade ........................ 7850 min
With thread spool ............... 6750 min
Tank capacity ......... 1200 ml / 1200 cm³
Weight (empty tank) ..................... 7.1 kg
Metal cutting blade
Threads
Cutting radius .........................430 mm
Thread thickness ......................2.4 mm
Thread length ............................... 6 m
Blade
Cutting diameter .....................255 mm
Max. rotational speed ...... 10000 min
Sound pressure level (L
blade ............. 98,47 dB(A), K
thread spool .... 97,60 dB(A), K
Sound power level (L
Guaranteed ......................... 114 dB(A)
Measured with
blade .... 108,47 dB(A); K
thread spool ...............106,80 dB(A);
................................ K
Vibration (a ) with blade
h
Left handle .... 4.796 m/s
Right handle ... 6.336 m/s
Vibration (a ) with thread spool
h
Left handle ... 12.438 m/s
Right handle . 16.719 m/s
The vibration values were determined in
accordance with ISO 22867.
) with
pA
= 2,5 dB
pA
= 2,5 dB
pA
)
WA
= 2,37 dB
WA
= 1,34 dB
WA
; K=1.5 m/s
2
2 ; K=1.5 m/s
; K=1.5 m/s
2
2 ; K=1.5 m/s
Levels of noise were determined according
to the norms and regulations in the decla-
ration of conformity.

Safety Information

In order to be able to operate the
equipment safely, all instructions
and information in the operating
instructions about safety, assembly
and operation must be followed pre-
cisely. Anyone operating or main-
taining this equipment must be fa-
miliar with the operating instructions
-1 and informed of potential hazards.
-1

Symbols in the Instructions

Warning signs with details for
the prevention of personal and
property damage.
Command signs (instead of the
exclamation mark, the command is
explained) with details for the preven-
-1 tion of damage.
Information signs with information
for better handling of the equipment.

Symbols on the Equipment

On the equipment, there are information
symbols. These convey important information
about the product or information about its use.
• Caution: Special safety measures are
required when handing the equipment!
2
2 • The entire operating instructions must
be read and understood before use.
Non-observance of the operating in-
2
structions may be fatal!
2
Attention!
GB MT
57