Sartorius Stedim Biotech Flexel 3D LevMix Hardwareanleitung Seite 7

Figure C: Left: Drive- Flexel
Right: Interface is installed in the railed port of the dolly (locked by the O-ring).
Figure D: Magnetic clamp (left) and
centering aligner (right).
Figure F: Test impeller levitates above the
head of the super-conductive drive unit
during a levitation test.
Magnetic Charger & Test Impeller Chart
Magnetic Charger
LT-DBCI001
LT-DBCI005
Note:
the appropriate magnetic charger must be used to set the drive machine for use with the
corresponding impeller. The machine will not properly drive an impeller which does not have
the corresponding magnet configuration.
® 3D LevMix Bags for drums interface.
Figure E: Magnetic clamp is assembled with
the centering aligner prior to attachment to
the Flexel
Corresponding Test Impeller
LT-DBAK004
LT-DBAK007
® 3D LevMix Bags for drums.
Magnet Configuration
6-magnet charger & impeller
4-magnet charger & impeller
7