VM Motori D700 Gebrauchsanweisungenhandbch Seite 75

Model
Dry shipping weight of engine
Maximum permanent lengthwise inclination
(with handwheel up)
Maximum permanent lengthwise inclination
(with handwheel down)
Maximum permanent crosswise inclination
Maximum operating speed
Maximum power
Maximum torque
Specific fuel consumption
Specific oil consumption
Type of injection
Type of fuel
Fuel supply
Injector supply
Type of lubrication
Circuit fuel supply
Oil change including filter
(standard sump)
Oil quantity at minimum level
(standard sump)
Oil quantity at maximum level
Oil pressure at minimum speed
(with started engine)
Alarm for oil pressure too low
Oil cooling
Total capacity of the cooling circuit
(excluding radiator and relevant pipes)
setting pressure of the expansion tank plug
Coolant
Coolant maximum temperature alarm
Opening value (start/finish) of thermostatic
valve
English
D703 E3
Kg
190
Degrees
30°
Degrees
35°
Degrees
30°
POWER AND TORQUE
rpm
2600
kW (CV)
36 (49)
rpm
Nm (kgm)
145 (14,7) a 1600
rpm
CONSUMPTION AT MAXIMUM POWER
g/kWh
g/CVh
0,5 - 1
FUEL SUPPLY CIRCUIT
The engine has been designed to be powered by standard fuels available on the
European market (according to specifications DIN EN 590). If it is to be powered
by BIODIESEL fuels (according to specifications UNI EN 14214), it can be
mixed, up to 5%, with fuel available on the European market (according to regu-
Important
Do not use fuels with specifications other than those indicated.
LUBRICATION CIRCUIT
liters (kg)
liters (kg)
liters (kg)
5÷7
The oil quantity at maximum level ( 5÷7 litre) depends on the capacity of the oil
bar
1,2 - 1,6
bar
0,4
COOLING CIRCUIT
litri
3,7
bar
1
Demineralised cold water 50% + Antioxidant and anti-freeze fluid 50%
(Inhibited glycol ethylene in compliance with ASTM D 3306)
°C
107
°C
80 (+/-2) / 95
- 13 -
D703 TE3
215
30°
35°
30°
2600
41,2 (56)
195 (19,9) a 1400
0,5 - 1
Direct injection
lation DIN EN 590).
Diaphragm pump
1 immersed injection pump per cylinder
Forced lubrication
Rotor pump
5÷7
sump with which the engine is equipped.
1,2 - 1,6
0,4
Oil/water cooler
3,7
1
107
80 (+/-2) / 95
D700/750 E2-E3
D703 IE3
215
30°
35°
30°
2600
48,6 (66,1)
260 (26,5) a 1200
0,5 - 1
5÷7
1,2 - 1,6
0,4
3,7
1
107
80 (+/-2) / 95
Technical information
GB