Processing Of Warranty Claims; Service; Ec Declaration Of Conformity - Parkside PFDS 120 A2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Warranty and service information / Service / EC Declaration of Conformity
does not cover product parts that are subject
to normal wear and tear and can therefore
be regarded as consumables, nor does
it cover damage to fragile parts such as
switches, rechargeable batteries or parts
made from glass.
This warranty is voided if the product
becomes damaged or is improperly used or
maintained. For proper use of the product,
all of the instructions given in the operating
instructions must be followed precisely. If the
operating instructions advise you or warn
you against certain uses or actions, these
must be avoided in all circumstances.
The product is for consumer use only and is
not intended for commercial or trade use.
The warranty becomes void in the event
of misuse and improper use, use of force,
and any work on the device that has not
been carried out by our authorised service
branch.
z Processing of warranty
claims
Please follow the instructions below to ensure
quick processing of your claim:
Please retain your proof of purchase and
quote the product number (e.g. the IAN
12345) in all correspondence.
The product number can be found on the
type plate, an engraving, the cover page of
your instructions (bottom left), or the sticker
on the back or underside of the device.
In the event of malfunctions or other defects,
please first contact our service department
below by phone or email.
If your product is found to be defective,
you can then send your product with proof
of purchase (till receipt) and a statement
describing what the fault involves and when
it occurred free of charge to the service
address given.
88 GB/MT
Please note:
If you visit www.lidl-service.com,
you can download this manual and
many other manuals, product videos
and software.
z Service
How to contact us:
GB, MT
Name: C. M. C. GmbH
Website: www.cmc-creative.de
E-mail: service.gb@cmc-creative.de
Phone: 0-808-189-0652
Registered office: Germany
IAN 314788
Please note that the following address is not
a service address. Please first contact the
service point given above.
Address:
C. M. C. GmbH
Katharina-Loth-Str. 15
66386 St. Ingbert
GERMANY
z EC Declaration of Conformity
We,
C. M. C. GmbH
Responsible for documentation:
Alexander Hoffmann
Katharina-Loth-Str. 15
66386 St. Ingbert
GERMANY
hereby take sole responsibility for declaring
that the product
Flux cored wire welder
Item number: 2185