Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty Period And Statutory Claims For Defects; Extent Of Warranty; Processing Of Warranty Claims - Parkside PESG 120 B4 Originalbetriebsanleitung

Elektro - schweissgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 79
Warranty and service information
This warranty service requires that you
retain proof of purchase (sales receipt)
for the defective device for the three
year period and that you briefly explain
in writing what the fault entails and
when it occurred.
If the defect is covered by our warranty,
we will repair and return your product
or send you a replacement. The original
warranty period is not extended when a
device is repair or replaced.
Warranty period and
z
z
statutory claims for
defects
The warranty period is not extended
by the guarantee. This also applies to
replaced and repaired parts. Any dam-
ages or defects detected at the time of
purchase must be reported immediately
after unpacking. Any incidental repairs
after the warranty period are subject to
a fee.

Extent of warranty

z
z
This device has been manufactured
according to strict quality guidelines and
carefully inspected before delivery.
The warranty applies to material
and manufacturing defects only. This
warranty does not extend to product
parts, which are subject to normal wear
and tear and can thus be regarded as
consumable parts, or for damages to
fragile parts, e.g. switches, recharge-
able batteries or parts made from glass.
This warranty is voided if the product
becomes damaged or is improperly
used or maintained. For proper use
of the product, all of the instructions
20
GB
given in the operating instructions must
be followed precisely. If the operating
instructions advise you or warn you
against certain uses or actions, these
must be avoided in all circumstances.
The product is for consumer use only and
is not intended for commercial or trade
use. The warranty becomes void in the
event of misuse and improper use, use
of force, and any work on the device
that has not been carried out by our
authorised service branch.
Processing of warranty
z
z
claims
To ensure prompt processing of your
claim, please follow the instructions
given below.
Please retain proof of purchase and the
article number (e.g. IAN) for all inquiries.
The product number can be found on
the type plate, an engraving, the cover
page of your instructions (bottom left), or
the sticker on the back or underside of
the device.
In the event of malfunctions or other
defects, please first contact our service
department below by phone or email.
If your product is found to be defective,
you can then send your product with
proof of purchase (till receipt) and a
statement describing what the fault
involves and when it occurred free of
charge to the service address given.
Note:
You can download this hand-
book and many more, as well as
product videos and software at
www.lidl-service.com.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 332010_1907

Inhaltsverzeichnis