Before Starting Assembly - LIVARNO LUX LSLB 20 A1 Bedienungsanleitung

LIVARNO LUX LSLB 20 A1
 Phillips screwdriver, flat-tip screwdriver
 Open-ended spanner, combination pliers, wire cutter

6.3 Before starting assembly

DANGER! The device must only be assembled by an authorised qualified electrician. The
power supply must only be established via the building's electric system.
DANGER! The electric circuit must be switched off during assembly!
WARNING! When drilling holes, ensure that you do not damage any hidden cables or
pipes.
 Before assembly, make yourself familiar with the individual parts of the LED spotlight as well as with
the instructions and illustrations, and observe them during assembly.
 Ensure that the cable to which the LED spotlight is to be connected, is not live. With this in mind,
remove the fuse from the relevant electric circuit in your fuse box or set the fuse to "0".
 You must also use a voltage tester to check that the cable is not live.
8 - English