LIVARNO LUX LSLB 20 A1 Bedienungsanleitung Seite 13

LIVARNO LUX LSLB 20 A1
Then fasten the power cable (10) by reinserting
the strain relief with the two screws.
Now fit the LED spotlight onto the mounting
plate (7). Push the unlock button (8) downwards
and slide the LED spotlight towards the wall until
the unlock button (8) snaps into the recess in the
LED spotlight housing.
The final step is to fasten the screws (6) into the
mounting plate (7) through the LED spotlight
housing from underneath using a Phillips
screwdriver.
Switch the electric circuit back on. To do this,
reinsert the fuse or switch on the circuit breaker
in the fuse box (position 1).
English - 11