Before Use; Mounting - LIVARNO LUX HG06280 Bedienungs- Und Sicherheitshinweise

contacts on the battery / re-
chargeable battery and in
the battery compartment
before inserting!
Remove exhausted batteries /
rechargeable batteries from
the product immediately.

Before use

TO LIFE BY ELECTRIC SHOCK!
Before performing any work, first
disconnect the product from the
mains power. Remove the power
adaptor from the socket.
4
Note: Remove all packaging
materials from the product.
Mounting (see Fig. A)
Note: Clean the surface well
onto which you wish to mount the
product. The surface must be clean,
free from grease and dry. Other-
wise the stickiness of the double-
sided adhesive tape (for LED
controller) or the double-sided
5
adhesive tape (on the back of
LED strip) might be limited.
10
26 GB/IE
DANGER
Remove the protective film from
the adhesive on the back of
the LED strip
the LED strip
point.
Connect the LED controller
to the LED strip
Note: Ensure when connect-
ing the LED controller
the LED strip
align the +GRB markings on
the LED controller
+GRB marking of LED strip
Attach the LED controller
using the attached double-
sided adhesive tape (for LED
controller)
5
Please ensure that the power
adaptor
4
sible.
Insert the power adaptor
into the socket before you
turn on the product.
Connecting the 2 LED strips
(see Fig. A):
Note: A maximum of two 5 m
LED strips can be connected
3
by using the 4-pin connector
and operated with one LED con-
troller and one power
6
and attach
3
at the desired
3
6
.
3
with
6
that you
3
with the
6
.
3
6
.
is always acces-
4
11