Before First-Time Use; Assembly And Installation; Charging The Battery - LIVARNO LUX 970-G Bedienungs- Und Sicherheitshinweise

EXPLOSION HAZARD! Incorrect
„
handling of the integrated
rechargeable battery in the
magnetic lamp can potentially cause an
explosion or a fire.
If rechargeable batteries are used
„
incorrectly, there is a risk of explosion or of
skin burns from escaping battery fluid.
Never throw rechargeable batteries on a
„
fire. They may explode or cause toxic
fumes�
Do not expose rechargeable batteries to
„
unlimited amounts of sunlight or heat�
Do not take rechargeable batteries apart or
„
short-circuit them�
Charge the battery at normal room
„
temperature (approx� 20 °C)�
Use only an SELV mains adaptor for
„
charging�
z Before first-time use
Check that all package contents are present�
Inspect the cordless magnetic lamp
the USB charging cable
external damage. If you find any signs of
damage, do not use the cordless magnetic
lamp� Please contact Customer Service at the
address indicated�
Unpack all parts of the product� Remove the
packaging material� Keep the packaging in
a safe place out of the reach of children�
There is a risk of suffocation if children are
allowed to play with packaging material�
z Assembly and installation
Using the magnetic holder
Please note: dispose of all packaging
material�
Take the magnetic holder with the adhesive
pad and pull off the protective strip (see
7
Fig� B)� Now stick the magnetic holder in the
desired position� To ensure good adhesion,
make sure the surface is flat, dry and free of
grease� Fix the cordless magnetic lamp
28
GB
and
1
for any signs of
11
to
1
the magnetic holder
integrated magnet
9
C)�
Using the suction pads
Please note: first check the nature of the
surface to make sure it is capable of
providing a secure fixing for the suction pads
with hooks on the wall or furniture item�
8
The surface must be flat and clean.
Hook the suction pad hooks
locating eyes on the back of the cordless
10
magnetic lamp (see Fig� E)� Make sure the
lamp is firmly attached. Only attach the
suction pads to a flat, clean surface, e.g. a
mirror� Check from time to time that the
cordless magnetic lamp is still firmly
attached�
Please note: removing the adhesive pad
may cause damage to the surface in some
cases� We can accept no liability for such
damage� When the battery needs to be
recharged, the magnetic lamp can simply be
removed from the suction pad hooks
the magnetic holder
z Charging the battery
Risk of electric shock!
The cordless magnetic lamp
be recharged in dry indoor areas using an
SELV mains adaptor� Before using the
cordless magnetic lamp
please fully charge the battery� To do so, use
only the USB charging cable supplied
(see Fig� D)� This lamp must not be operated
while being charged�
Plug the USB charging cable supplied
„
into the micro-USB socket
(see Fig� F)�
To charge the lamp, connect the USB
„
charging cable
11
(5 VDC, max� 0�48 A)�
Plug the USB mains adaptor into a power
„
outlet socket�
with the aid of the
7
in the casing (see Fig�
into the two
8
or
8
�
7
should only
1
for the first time,
1
11
11
on the lamp
4
to a USB mains adaptor