Mounting - LIVARNO LUX LSLB 20 A1 Bedienungsanleitung

6.4 Mounting

The LED spotlight is designed for wall mounting only.
Before installation, ensure that the cable to
which the product is to be connected is not live.
To do this, remove the fuse or switch off the
circuit breaker in the fuse box (position 0).
Detach the mounting plate (7) from the LED
spotlight by using a Phillips screwdriver to
remove the screws (6).
Now push the unlock button (8) on the mounting
plate (7) downwards and remove the mounting
plate (7) on the tie from the LED spotlight
housing.
Once you have removed the two screws, you
can then remove the strain relief.
LIVARNO LUX LSLB 20 A1
English - 9