Proper Mounting Location; Required Tools; Before Starting Assembly - LIVARNO LUX LSS 520 A1 Bedienungsanleitung Und Serviceinformationen

LIVARNO LUX LSS 520 A1

Proper mounting location

Carefully choose the mounting location and thoroughly prepare for assembly.
 Systematically arrange all individual parts, required tools and mounting materials and place them
within easy reach.
 The solar LED spotlight (1) may only be mounted on a sturdy support, such as a masonry wall etc.
 Do not mount the solar LED spotlight (1) above a heat source or within direct proximity of other light
sources. Also account for Figure [D] on the cover page when selecting the mounting location.
 The built-in battery of the solar LED spotlight (1) is exclusively charged via the solar panel (7) part of
the delivery scope. The cable (8) is approx. 3 m long. Therefore, the mounting location of the solar
panel (7) must be chosen such that the plug can be connected to the cable (6) socket of the solar LED
spotlight (1) without difficulty. When doing so, lay the cable (8) in a manner so it does not obstruct
people or become a tripping hazard. Ideally, mount the solar panel (7) at a bright location exposed
to direct sunlight.
 Choose a mounting location that protects the solar LED spotlight (1) from wind, rain and soiling.
 Determine in advance which mounting materials are suitable for the designated mounting location.
The solar LED spotlight (1) is delivered with mounting materials suitable for concrete.

Required tools

The package does not include the following tools. This list is provided to offer general orientation. The
precise characteristics of the required tools depend on the chosen mounting location.
 Ladder
 Spirit level, yardstick, pencil
 Drilling machine and drill
 Phillips screwdriver, flat-tip screwdriver
 Open-ended spanner, combination pliers, wire cutter

Before starting assembly

When drilling holes, ensure you do not damage any
hidden cables or pipes.
Mount the device using the proper tools.
Before assembly, make yourself familiar with the individual parts of the solar LED spotlight (1) as well as
with the instructions and illustrations, and observe them during assembly.
8 - English