Setting the lighting duration
Turn the rotary control TIME
nation. The lighting duration can be adjusted within a time window of approx.
10 seconds to 4 minutes.
Adjusting the sensitivity of the sensor
Turn the rotary control SENS
Note: The motion sensor
atures are low, it is more sensitive to body heat than when outdoor temperatures
are warm. Be sure to regulate the sensitivity of the sensor over the course of
the year.
Setting the daylight level
Turn the rotary control LUX
the motion sensor
the motion sensor
are not exceeded.
Cleaning and Care
Before cleaning, remove the fuse or switch off the circuit breaker at the fuse box.
Never immerse the product in water or other liquids. Otherwise the product can
be damaged.
Clean the product with a lint-free, slightly moist cloth and mild cleaning agent.
Re-install the fuse for this circuit or switch on at the circuit breaker in the fuse box.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose of
at local recycling facilities.
Observe the marking of the packaging materials for waste separation,
which are marked with abbreviations (a) and numbers (b) with following
b
a
meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: com-
posite materials.
The product and packaging materials are recyclable, dispose of it sepa-
rately for better waste treatment. The Triman logo is valid in France only.
clockwise to increase the duration of the illumi-
19
clockwise to increase the sensitivity of the sensor.
17
responds to heat radiation. When outdoor temper-
16
to increase the daylight level: In the position,
18
only reacts at night (at approx. 10 lx). In the
16
also responds at daylight levels, as long as about 20,000 lx
16
position,
GB/CY
11