Note: After the adjustment, rotate the sensor cover
the original position (cover the controllers), otherwise it will
influence the sensor function.
Setting the lighting duration
Turn the rotary control TIME
duration of the illumination. The lighting duration can be
adjusted within a time window of approx. 8 seconds to
8 minutes.
Adjusting the sensitivity of the sensor
Turn the rotary control SENS
sensitivity of the sensor.
Note: The motion sensor
When outdoor temperatures are low, it is more sensitive to
body heat than when outdoor temperatures are warm. Be sure
to regulate the sensitivity of the sensor over the course of the
year.
Setting the daylight level
Turn the rotary control LUX
In the - position, the motion sensor
approx. 20 lx). In the + position, the motion sensor
responds at daylight levels, as long as about 20,000 lx are
not exceeded.
Cleaning and care
Before cleaning, remove the fuse or switch off the circuit
breaker at the fuse box.
Never immerse the product in water or other liquids. Other-
wise the product can be damaged.
24 GB/IE
clockwise to increase the
15
clockwise to increase the
14
responds to heat radiation.
12
to increase the daylight level:
13
only reacts at night (at
12
back to
11
also
12