Potential Hazards During Electric Arc Welding - Parkside PFDS 120 A2 Bedienungs- Und Sicherheitshinweise

Safety instructions
Protect your eyes using the
„
appropriate protective glasses
(EN level 9-10), which are fas-
tened to the supplied
welding mask.
Wear gloves and dry protec-
tive clothing that are free of oil
and grease to
protect the skin from exposure
to ultraviolet radiation of the
arc.
welding power source
to defrost pipes.
Please note:
The light radiation emitted by
„
the electric arc can damage
eyes and cause burns to the
skin.
Arc welding creates sparks
„
and drops of melted metal.
The welded workpiece starts
to glow and remains hot for
a relatively long period.
Therefore, do not touch the
workpiece with bare hands.
Arc welding can cause
„
vapours to be release that
may be hazardous to health.
Be careful not to inhale these
vapours.
Protect yourself from the
„
harmful effects of the electric
arc and keep people that are
10
GB
Do not use the
not involved in the work away
from the arc maintaining a
distance of at least 2 m.
ATTENTION!
During the operation of
„
the welding device, other
consumers may experience
problems with the voltage
supply depending on the
network conditions at the con-
nection point. In case of doubt,
please contact your energy
supply company.
During the operation of the
„
welding device, other devices
may malfunction, e.g. hearing
aids, cardiac pacemakers, etc.
z Potential hazards during
electric arc welding
There are a series of potential
hazards that can occur during
electric arc welding. It is there-
fore particularly important for the
welder to observe the following
rules to avoid endangering him/
herself and others and to prevent
damage to people and the
device.
Work on the voltage side,
„
e.g. on cables, plugs, sockets
etc., may only be carried out
by qualified electricians
according to national and