Vibration Isolator Installation - Agilent Technologies TV 1001 Navigator Serie Bedienungshandbuch

Assemble the seal ring and lock the vent device in position using the
KF klamp.
Figure 48

Vibration Isolator Installation

Three vibration isolators for ISO and CFF inlet flange version pumps
are available as accessories.
The three model part numbers are the following:
They typically reduce the vibration transmitted from the TV 1001
Navigator to the system by a factor of 20.
Please refer to the relevant instruction manual.
TV 1001 Navigator User Manual /
model 969-9345 for ISO 160 flange;
model 969-9346 for ISO 200 flange;
model 969-9336 for CFF 10" flange.
87-900-945-01 (I)
Technical Information

Vibration Isolator Installation

17
291/312