Installation - Agilent Technologies TV 1001 Navigator Serie Bedienungshandbuch

Installation

Do not install or use the pump in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk.
During operation, the following environmental conditions must be
respected:
Do not remove the adhesive and protective cap before connecting the turbopump
CAUTION!
to the system.
Figure 2
In the presence of magnetic fields the pump must be protected using
a ferromagnetic shield. See the appendix "Technical Information" for
detailed information.
The TV 1001 Navigator must be connected to a primary pump (see
"Technical Information").
TV 1001 Navigator User Manual /
maximum pressure: 2 bar above atmospheric pressure
temperature: from +5 °C to +35 °C (see the diagram pressure-
temperature in the appendix "Technical Information")
relative humidity: 0 – 95 % (non-condensing)
87-900-945-01 (I)
Instructions for Use

Installation

231/312
16