Vibration Isolator Installation - Agilent Technologies Turbo-V 81-M Bedienungshandbuch

All manuals and user guides at all-guides.com
Figure 27
Do not overtighten the valve as this may damage the thread on the pump.
CAUTION!
Then connect the cable from the valve to the suita-ble connector on
the controller.

Vibration Isolator Installation

Two vibration isolators for ISO and CFF inlet flange version pumps
are available as accessories.
The two model part numbers are the following:
model 969-9375 for ISO 63 flange;
model 969-9376 for CFF 4.5" flange.
They typically reduce the vibration transmitted from the Turbo-V 81-
M to the system by a factor of 20.
Please refer to the relevant instruction manual.
Turbo-V 81-M User Manual / 87-900-983-01 (E)
Technical Information
213/228
17