Tv 1001 Navigator Switching Off; Emergency Stop - Agilent Technologies TV 1001 Navigator Serie Bedienungshandbuch

16 Instructions for Use
Use

TV 1001 Navigator Switching off

To switch off the TV 1001 Navigator it is necessary to re-move the
mains. The integrated controller immediately stops the pump.
The Turbo-V controller must be powered with 3-wire power cord (see
WARNING!
orderable parts table) and plug (internationally approved) for user's safety.
Use this power cord and plug in conjunction with a properly grounded power
socket to avoid electrical shock and to satisfy CE requirements. High voltage
developed in the controller can cause severe injury or death. Before servicing
the unit, disconnect the input power cable.

Emergency Stop

To immediately stop the TV 1001 Navigator in an emergency
condition it is necessary to remove the supply cable from the mains
plug.
236/312 TV 1001 Navigator User Manual / 87-900-945-01 (I)