Standard Rack Controller Compatible Vent Valve Mod. 969-9843 - Agilent Technologies TV 1001 Navigator Serie Bedienungshandbuch

Do not overtighten the valve as this may damage the thread on the pump.
CAUTION!
Then connect the cable from the valve to the suita-ble connector on
the controller (see the preceding paragraph "INTERCONNECTIONS").
Standard Rack Controller Compatible
Vent Valve mod. 969-9843
Figure 45
This vent valve has a fixed delay time of about 5 sec. This value can
be used only with rack controller.
To install the vent valve execute the same steps as the vent valve
model 969-9834 (see the above paragraph).
TV 1001 Navigator User Manual / 87-900-945-01 (I)
Technical Information
Vent Accessories
289/312
17