Maintenance And Troubleshooting; Maintaining Your Touch Display; Touch Sensor Care And Cleaning - 3M MicroTouch M1700SS Bedienungsanleitung

3M™ MicroTouch™ Display M1700SS User Guide
CHAPTER 3

Maintenance and Troubleshooting

Maintaining Your Touch Display

To maintain your display and keep your display operating at peak performance:
 Keep your display and sensor clean.
 Adjust the display video controls. Refer to Chapter 3 for more information.
 Do not install the display in a place where ventilation may be hindered. Always maintain adequate
ventilation to protect the display from overheating and to ensure reliable and continued operation.

Touch Sensor Care and Cleaning

The touch sensor requires very little maintenance and should be periodically cleaned.
Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your touch sensor.
 Apply the cleaner with a soft, lint-free cloth.
 Spray the cleaning liquid onto the cloth, not the sensor, so that drips do not seep inside the display or
stain the bezel.
 Always handle the touch sensor with care. Do not pull on or stress cables.
Document #19-268 Rev AN
20