Installing The Video Card And Video Driver; Supported Video Display Modes And Refresh Rates - 3M MicroTouch M1700SS Bedienungsanleitung

3M™ MicroTouch™ Display M1700SS User Guide
Figure 8. Adjusting the Viewing Angle
Lift up latch to release lock and raise or
lower display to suit your needs.

Installing the Video Card and Video Driver

Before you can connect your display, make sure your computer has a video card and
driver already installed for the display.

Supported Video Display Modes and Refresh Rates

Your video card should support one of the display modes specified in Table 1. If you
select an unsupported video mode, the monitor may stop working or display
unsatisfactory video image.
Document #19-268
Lift up on the latch to release lock. Adjust the M1700SS
Display by pushing or pulling on the top front of the display
until the screen is at the best viewing angle for you. Then
push down on latch to engage locking mechanism and
stabilize display position.
Rev AN
Push down latch to engage lock and
stabilize display position.
11