attika
English
RAIS/
- User manual for VIVA L Gas
SETTING UP OF THE ELECTRONIC CODE
In order for the remote control to work, it must be synchronised with the
stove's receiver� A code is selected automatically from 65,000 possible
codes� The stove and remote control are synchronised in the following
manner�
Press and hold down the "Reset" button
until you hear a short beep followed by a
long beep� Release the button�
Now you have 20 seconds to press
the "Down Arrow" button on the remote
control� Hold down the button until you
hear two short beeps from the receiver�
Now you can see the word "conn" on the
remote control�
The receiver and remote control are now synchronised�
38